Enfitnix XLite100

Contents

Enfitnix XLite100 Smart Tail Light

User Manual

Introduction

The Enfitnix XLite100 is a smart bicycle tail light designed for enhanced cycling safety. It features advanced brake sensing, light and motion detection, and a durable aluminum alloy chassis. This manual provides detailed instructions for the proper installation, operation, and maintenance of your XLite100 Smart Tail Light.

Enfitnix XLite100 Smart Tail Light mounted on a bicycle seatpost
The Enfitnix XLite100 Smart Tail Light installed on a bicycle.

Package Contents

Please check the package to ensure all items are present:

  • XLite100 Taillight Unit
  • Mounting Bracket (Saddle or Seatpost version)
  • Micro USB Charging Cable
  • Instruction Manual
  • Nylon Rope Ties
Contents of the XLite100 Saddle Version package including taillight, saddle bracket, micro USB cable, manual, and nylon ties.
Package contents for the XLite100 Saddle Version.

Specifications

FeatureDescription
ModelXLite100
Intelligent SensingBrake Sensing, Light Sensing, Motion Sensing
Waterproof LevelIPX6
Light SourceCOB LED
Body MaterialFull 6061 Aluminum Alloy Chassis
Operating ModesManual Mode (3 flash modes), Auto Mode
Battery400mAh Li-ion rechargeable
ChargingUSB (Micro USB port)
Run Time20+ hours
WeightBelow 40g (approx. 38g)
Dimensions (approx.)34mm (W) x 45mm (H) x 57mm (L)
Mounting PlacementSeatpost / Saddle Rails
CertificationCE
Dimensions of the XLite100 Smart Tail Light: 34mm width, 45mm height, 57mm length.
Approximate dimensions of the XLite100 Smart Tail Light.
The XLite100 Smart Tail Light on a digital scale, showing a weight below 40g.
The XLite100 is designed to be lightweight.

Setup

1. Charging the Device

Before first use, fully charge the XLite100. Connect the provided Micro USB cable to the charging port on the device and to a USB power source (e.g., computer, USB wall adapter). The charging indication light will show the charging status. A full charge is indicated when the light on the back turns off or changes color (refer to specific light behavior in the manual if available).

Diagram showing the USB Micro charging port on the XLite100 and the charging indication light.
USB charging port and charging indication.

2. Installation

The XLite100 can be mounted on your bicycle's seat rails or seatpost, depending on the bracket version included. Ensure the light is mounted horizontally for optimal brake sensing performance.

Seat Rails Installation:

  1. Place the light unit onto the saddle rails.
  2. Ensure the light is horizontal and securely positioned.
  3. Tighten the nylon cable ties around the saddle rails and the bracket to fix the light in place.
  4. Cut off any excess length from the nylon ties.
Three images showing the XLite100 Smart Tail Light mounted under a bicycle saddle.
Various views of the XLite100 mounted on seat rails.
Two steps for easy installation: 1. Place the light on seat rails horizontally. 2. Tighten nylon cable ties.
Easy installation steps for seat rails.

Optional Number Plate Bracket:

The XLite100 also supports an optional number plate bracket, allowing you to easily convert the tail light into a number plate holder.

Image showing the XLite100 with an optional number plate bracket attached to a bicycle saddle.
XLite100 with optional number plate bracket.

Operating Instructions

1. Power On/Off and Mode Selection

The XLite100 features a single button for control and offers both Manual and Auto operating modes.

Diagram showing the single button control on the XLite100: Single Click for flash modes, Press 1s to turn off, Press 6s to reset.
Easy access button functions.
  • Single Click: Switches between the three available flash modes.
  • Press for 1 second: Turns the light off.
  • Press for over 6 seconds: Resets the device.

Note: If operating in Auto mode, the light will be reactivated if vibration is detected after being turned off manually.

2. Dual Operating Modes

The XLite100 has a switch on the back to select between Manual and Auto modes.

Image showing the Manual/Auto mode switch on the back of the XLite100.
Dual Operating Modes switch.
  • Manual Mode: Functions like an ordinary tail light. You need to manually switch it on/off.
  • Auto Mode: Automatically starts and stops based on light intensity and motion, saving power and providing convenience.

3. Smart Features

The XLite100 incorporates several smart technologies for optimal performance:

Brake Sensing:

The XLite100 is equipped with a built-in accelerometer and a high-performance MCU, utilizing a three-level digital filter algorithm to accurately detect braking motions. It also features Self-Adaptive Technology to compensate for gravity forces when cycling on slopes or if the light is not installed perfectly horizontally, ensuring correct brake detection.

Diagram illustrating the filtering of noise and correct detection of braking using an integrated accelerometer.
Integrated Accelerometer: Filtering noise and detecting brake.
Diagram showing how Self-Adaptive Technology compensates for gravity (G) on a sloped surface to ensure accurate brake detection.
Self-Adaptive Technology for accurate braking detection.

Smart Light Sensing:

Integrated with a high-sensitive ALS sensor, the XLite100 automatically stops during daytime and starts at night. It will also auto shut down in approximately 30 seconds when exposed to a high light intensive environment.

Diagram showing the smart light sensing feature, automatically stopping during day and starting at night, with auto shut down in high light.
Smart Light Sensing functionality.

Motion Sensing (Auto Start/Stop):

In Auto mode, the light will automatically turn on when motion is detected and enter sleep mode to save power when no motion is detected for a period.

4. Easy Control Overview

The following table summarizes the light's behavior under different conditions in Manual and Auto modes:

Table summarizing Easy Control conditions for Manual and Auto modes, including movement, light intensity, no movement, and braking.
Easy Control: Manual vs. Auto Mode behavior.

Note: Only the front button can turn off the light when operating under "Manual" mode.

Maintenance

To ensure the longevity and optimal performance of your XLite100 Smart Tail Light, please follow these maintenance guidelines:

  • Cleaning: Do not use acidic or alkaline solvents (such as rust removers and diluents) to clean accessories, as this can cause corrosion and damage. It is recommended to use neutral detergents.
  • Water Exposure: Avoid direct flushing of accessory connections and circuit components with high-pressure water flow to prevent water ingress, rust, or short circuit faults. The device is IPX6 waterproof, meaning it is protected against high-pressure water jets, but direct high-pressure flushing of sensitive areas should still be avoided.
  • Storage: Do not expose the accessories to strong sunlight for a long time to avoid material aging. Store the device in a dry and ventilated place, away from corrosive gases.
  • Inspection: Natural wear and performance degradation caused by normal use are not covered by the warranty and require regular inspection and replacement of worn parts.
Image showing the XLite100 Smart Tail Light on a bed of pebbles, highlighting its IPX6 waterproof design.
IPX6 Waterproof design for various environments.

Troubleshooting

  • Light not turning on:
    • Check battery level and recharge if necessary.
    • Ensure the light is not in Auto mode during bright daylight, as it will automatically turn off.
    • Try pressing the control button for over 6 seconds to perform a reset.
  • Brake sensing not working accurately:
    • Verify that the light is mounted horizontally on your bicycle. The Self-Adaptive Technology helps, but proper initial installation is crucial.
    • Ensure there are no obstructions affecting the light's motion sensors.
  • Light turns off unexpectedly in Auto mode:
    • The light may have entered sleep mode due to prolonged inactivity. Resume cycling to reactivate it.
    • If in a brightly lit environment, the smart light sensing feature may have turned it off.

User Tips

  • Regular Charging: To ensure consistent performance, especially for long rides, regularly check the battery level and charge the device.
  • Lifespan Consideration: While designed for durability, electronic components can have a finite lifespan. Consider replacing the unit after extended periods of heavy use (e.g., 2+ years) if performance degrades.

Warranty and Support

Natural wear and performance degradation caused by normal use are typically not covered under warranty. For detailed warranty information and support, please refer to the official user manual PDF or contact the manufacturer directly.

A digital version of the user manual is available here: Enfitnix XLite100 User Manual (PDF)

Safety Information

Warning: Suffocation Hazard

To avoid danger of suffocation, keep this bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.

Product Usage Precautions:

  • Do not use acidic or alkaline solvents (such as rust removers and diluents) to clean accessories to avoid corrosion and damage. It is recommended to use neutral detergents.
  • Avoid direct flushing of accessory connections and circuit components with high-pressure water flow to prevent water ingress, rust, or short circuit faults.
  • Do not expose the accessories to strong sunlight for a long time to avoid material aging; Store in a dry and ventilated place, away from corrosive gases.
  • Natural wear and performance degradation caused by normal use are not covered by the warranty and require regular inspection and replacement of worn parts.
Compliance markings including UKCA, CE, FCC, and recycling symbols.
Compliance and recycling information.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.