Introduction
The Yieryi BLE-9100 is a professional smart Bluetooth Dissolved Oxygen (DO) meter designed for accurate measurement of dissolved oxygen concentration and temperature in various water environments. This device features mobile app intelligent control, cloud-based data management, automatic calibration, and automatic temperature compensation, making it suitable for applications such as drinking water analysis, aquariums, fish tanks, swimming pools, farmland irrigation, and laboratory use.
Dissolved oxygen refers to the concentration of molecular oxygen dissolved in water, typically expressed in milligrams per liter (mg/L or ppm) and saturation rate (%). The BLE-9100 offers an extended oxygen concentration range of 0.0-30.0 mg/L, surpassing many standard meters. Its permeable membrane probe separates the test solution from the sensing electrode, allowing oxygen to pass through for precise measurement.

Figure 1: Yieryi BLE-9100 Dissolved Oxygen Meter and App Interface
Safety Information
- Read all instructions carefully before use.
- Keep the device out of reach of children.
- Do not disassemble or modify the device.
- Ensure proper battery installation and replacement.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Handle the probe with care to prevent damage.
Package Contents
The standard package for the BLE-9100 Dissolved Oxygen Meter includes:
- 1 x BLE-9100 Bluetooth Dissolved Oxygen Meter (Main Body)
- 1 x Dissolved Oxygen Probe (with 1.5m cable, or 3m cable for BLE-9100-3M model)
- 6 x Probe Protective Covers
- 1 x Electrolyte solution (for probe maintenance)
- 1 x Instruction Manual

Figure 2: BLE-9100 Package Contents
Setup
1. Battery Installation
The BLE-9100 requires 3 x 1.5V button batteries (not included). To install:
- Locate the battery compartment on the back of the meter.
- Open the compartment cover.
- Insert three 1.5V button batteries, ensuring correct polarity.
- Close the battery compartment cover securely.

Figure 3: Meter Components and Battery Location
2. Probe Connection
Connect the dissolved oxygen probe to the main meter body using the electrode interface. Ensure the connection is firm and secure.

Figure 4: Electrode Interface
3. Mobile App Installation
To utilize the smart features, download and install the dedicated mobile application:
- Scan the appropriate QR code below for your mobile phone's operating system (Android or iOS).
- Follow the on-screen instructions to download and install the app.

Figure 5: App Download QR Codes
4. Bluetooth Connection
To connect the meter to the mobile app via Bluetooth:
- Ensure the water quality pen is turned on.
- If the Bluetooth logo is not visible on the meter's display, press and hold the power button for 5 seconds until the Bluetooth logo appears.
- Turn on Bluetooth on your mobile phone.
- Open the installed BLE-9100 app. The app should automatically detect and connect to the meter.
Video 1: Demonstrating Bluetooth connection and app functionality.
Operating Instructions
1. Basic Measurement
- Ensure the meter is powered on and the probe is connected.
- Remove the probe protective cover.
- Immerse the probe directly into the solution to be measured. There is no need to open the protective cover of the electrode when measuring and calibrating.
- Read the dissolved oxygen concentration (mg/L or %) and temperature (°C or °F) directly from the meter's LCD display or the connected mobile app.

Figure 6: Data Synchronization Display
2. Mobile App Intelligent Control
The mobile app provides enhanced control and data management features:
- Full Display of Reading: View multiple parameters simultaneously on the mobile phone's full screen.
- Backlight Control: Turn the meter's screen backlight on or off directly from the app.
- Hold Reading: Lock the current measurement value for easier recording.
- Save Data: Manually save measurement data with optional notes. The app also supports automatic data saving at set intervals.
- View Saved Data and Share: Access historical data, export it to Excel, and share with others.
- Calibration Record: View a history of calibration events.
- Function Settings: Adjust various parameters, including maximum and minimum dissolved oxygen limits.
- Language Switching: Switch the app interface between Chinese and English.

Figure 7: Mobile App Interface Overview
3. Maximum and Minimum Settings
You can set custom maximum and minimum limits for dissolved oxygen in the app's function settings. If a measurement falls outside these defined limits, the value will be displayed in red on the app interface, providing an immediate visual alert.

Figure 8: Maximum and Minimum DO Settings in App
4. Automatic Calibration
The meter supports automatic calibration. Refer to the app's calibration section for detailed instructions on performing a calibration. Two sets of calibration points are optional.
Maintenance
1. Probe Care
- The probe is detachable and replaceable.
- The device is equipped with 6 probe protective covers. Use these covers to protect the probe membrane when not in use or during storage.
- Regularly clean the probe according to the instructions provided in the full manual to ensure accurate readings.
- Ensure the probe membrane is always moist. Store the probe in its protective cap with a small amount of electrolyte solution or distilled water.

Figure 9: Detachable Probe and Protective Covers
2. Storage
When not in use, store the meter and probe in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the probe has its protective cover on.
3. Battery Replacement
Replace batteries when the low battery indicator appears on the LCD display. Follow the battery installation steps outlined in the Setup section.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Bluetooth logo on meter display. | Bluetooth function is off. | Press and hold the power button for 5 seconds to activate Bluetooth. |
| Cannot connect to mobile app. | Bluetooth not enabled on meter or phone, or app not open. | Ensure meter Bluetooth is on, phone Bluetooth is on, and the app is open. Restart both devices if necessary. |
| Measurement value displayed in red on app. | Measurement exceeds set maximum/minimum limits. | This is an alert. Review your set limits in the app's function settings. |
| Inaccurate or unstable readings. | Probe needs cleaning or calibration, or is damaged. | Clean the probe, perform a calibration, or replace the probe if damaged. |
| Meter does not power on. | Dead or incorrectly installed batteries. | Replace batteries with new 1.5V button batteries, ensuring correct polarity. |
Specifications
| Parameter | Value |
|---|---|
| Model | BLE-9100 |
| Dissolved Oxygen Range | 0.0~30.0 mg/L, 0.0-300.0% |
| Temperature Range | 0.1 ~ 40 °C, 32.1-104.0 °F |
| Dissolved Oxygen Accuracy | ±1.5% F.S |
| Dissolved Oxygen Saturation Accuracy | ±1.5% F.S |
| Temperature Accuracy | ±0.5 °C |
| Dissolved Oxygen Resolution | 0.1 mg/L |
| Oxygen Concentration Resolution | 0.1% |
| Temperature Resolution | 0.1 °C / 0.1 °F |
| Automatic Temperature Compensation (ATC) | 0-40 °C |
| Operating Environment | 0.1-40.0 °C, RH max: 90% |
| Meter Size | 155 x 35 x 35 mm |
| Probe Line Length | 1.5m (standard), 3m (BLE-9100-3M) |
| Power Supply | 3 x 1.5V button battery (not included) |
| Auto Shut-off Time | Approximately 8 minutes |
| Certification | CE |
| Is Smart Device | Yes |
| With Backlight | Yes |

Figure 10: Meter Dimensions and Components
Warranty and Support
Yieryi products are designed for accuracy and reliability. The brand, established in 2016, focuses on high-precision measurement tools using quality components. For specific warranty details, return policies, or technical support, please refer to the seller or contact Yieryi customer service directly through their official channels. Keep your purchase receipt for warranty claims.
The BLE-9100 is CE certified, indicating compliance with European safety, health, and environmental protection requirements.