SUSWE SU600

Contents

SUSWE SU600 Variable Frequency Drive User Manual

Model: SU600

Universal Frequency Converter for Three-Phase Motors

1. Product Overview

The SUSWE SU600 is a high-performance variable frequency drive (VFD) designed for controlling three-phase motors. It features a 1-phase 220V input and provides a 3-phase 380V output, with power ratings ranging from 0.75KW to 5.5KW. The SU600 supports RS485 communication and incorporates multiple protection functions to ensure device safety and longevity. Its main board is designed to be waterproof, moisture-proof, and mildew-proof, enhancing durability in various environments.

SUSWE SU600 VFD front view with key features
Figure 1: SUSWE SU600 VFD highlighting 1-phase 220V input, 3-phase 380V output, RS485 support, multiple protection functions, energy saving, high efficiency, and stability.
Internal view of the VFD main board
Figure 2: Internal view of the VFD main board, showcasing its waterproof, moisture-proof, and mildew-proof characteristics.

2. Setup and Installation

2.1 Wiring Diagram

Proper wiring is crucial for safe and effective operation. Refer to the following diagram for connecting the input power, motor, ground, and optional brake resistor.

Detailed wiring diagram for SU600 VFD
Figure 3: Wiring diagram showing connections for input power (R, S/L1, T/L2), output power to motor (U, V, W), ground wire, and brake resistor (P+, PB). Ensure all connections are secure and follow local electrical codes.
Terminal wiring diagram for SU600 VFD
Figure 4: Terminal wiring diagram including power input, three-phase induction motor, braking resistor, multifunctional input terminals (X1-X4, COM), external keyboard interface (J11), +10V, AI (DC 0-10V / DC 0-20mA), GND, AO (DC 0-10V / 0-20mA), RS485 (485+, 485-), and relay output (TA, TC).

2.2 External Operation Panel Connection

The SU600 VFD supports an external operation panel for remote control and monitoring. Connect the external panel using the provided cable to the external network port on the VFD.

Connection of external operation panel to VFD
Figure 5: Illustration of connecting the external operation panel to the main VFD unit.
External panel and cable components
Figure 6: The external panel and its connecting cable.

3. Operating Instructions

3.1 Control Panel Overview

The VFD features an intuitive control panel for easy operation. Familiarize yourself with the buttons and indicators:

SU600 VFD control panel layout
Figure 7: Control panel layout with labels for FWD (Forward), REV (Reverse), Hz (Frequency), A (Current), V (Voltage), programming key, confirm key, run key, stop key, incremental key, decrement key, and external network port.
  • FWD/REV Indicators: Show forward/reverse operation.
  • Hz/A/V Indicators: Display frequency, current, and voltage.
  • PRG (Programming Key): Enters programming mode.
  • ENT (Confirm Key): Confirms selections or parameter changes.
  • RUN (Run Key): Starts the motor.
  • STOP (Stop Key): Stops the motor.
  • Up/Down Arrows (Incremental/Decrement Keys): Adjust parameters or frequency.
  • External Network Port: For connecting the external operation panel.

3.2 Panel Operation Demonstration

Watch this video for a demonstration of how to operate the SU600 inverter using the control panel to adjust motor speed.

Video 1: Demonstration of SU600 inverter panel operation, showing how to start, stop, and adjust the frequency (speed) of a connected motor.

4. Maintenance

To ensure the longevity and optimal performance of your SU600 VFD, follow these maintenance guidelines:

  • Regular Cleaning: Keep the VFD unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Environmental Protection: The main board is designed to be waterproof, moisture-proof, and mildew-proof. However, avoid exposing the unit to excessive moisture or extreme temperatures.
  • Ventilation: Ensure adequate ventilation around the VFD to prevent overheating. Do not block the cooling vents.
  • Connection Checks: Periodically inspect all wiring connections for tightness and signs of wear or corrosion.
  • Professional Inspection: For complex issues or internal inspections, consult a qualified technician.

5. Troubleshooting

If you encounter issues with your SU600 VFD, consider the following general troubleshooting steps:

  • No Power: Check the input power supply and circuit breaker. Ensure all power connections are secure.
  • Motor Not Running: Verify the motor wiring according to the diagram. Check the VFD display for any error codes. Ensure the 'RUN' command is active.
  • Abnormal Noise/Vibration: Inspect the motor and its load for mechanical issues. Check VFD parameters for correct settings.
  • Overload/Overcurrent: Reduce the motor load or check for motor faults. Ensure the VFD's output current rating matches the motor's requirements.
  • Communication Issues (RS485): Verify RS485 wiring and communication settings.

If the problem persists, refer to the detailed troubleshooting section in the complete product manual or contact technical support.

6. Specifications

The SU600 series offers various models with different power capacities. Refer to the table below for detailed specifications.

SU600 Frequency Converter Series Index Table
Figure 8: SU600 Frequency Converter Series Index, including naming rules, power supply capacity (kVA), rated input current (A), rated output current (A), and adapted motor power (kW/HP) for single-phase 220V to three-phase 380V, single-phase 220V to three-phase 220V, and three-phase 380V to three-phase 380V configurations.
General Specifications
AttributeValue
Model NumberSU600
Output Power0.75-5.5KW
TypeDC/AC Inverters
Output Current2.5-13A
Output Frequency50-400HZ
Weight1-2Kg
Size147*72*119mm / 185*87*138mm (varies by model)
Output TypeSINGLE (likely refers to single-phase input, but output is 3-phase)
CertificationCE, FCC, RoHS

7. Warranty and Support

The SUSWE SU600 Variable Frequency Drive comes with a 1-year warranty. For any technical assistance, questions, or support, please contact the seller or manufacturer directly. Ensure you have your product model and purchase details ready when contacting support.

8. User Tips

  • External Panel Convenience: For applications requiring remote control or easier access to the VFD's interface, consider purchasing the external panel and cable. This can simplify operation and monitoring, especially if the main unit is installed in a less accessible location.
  • Verify Voltage Compatibility: Always double-check that the VFD model you select matches your input power (e.g., 1-phase 220V) and your motor's voltage requirements (e.g., 3-phase 380V). Incorrect voltage can damage the unit or the motor.
  • Proper Grounding: Ensure the VFD and the motor are properly grounded according to the wiring diagrams and local electrical safety standards.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.