DEKO DKSG60K1/DKSG20K3Y

Contents

DEKO HVLP Spray Gun Instruction Manual

Models: DKSG60K1, DKSG20K3Y

Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your DEKO HVLP Spray Gun. Please read this manual thoroughly before first use and keep it for future reference.

Product overview and demonstration of key features.

General Safety Warnings

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) Work area safety

  • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical safety

  • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
  • Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
  • Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
  • When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
  • If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

  • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
  • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
  • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
  • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
  • Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
  • If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
  • Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4) Power tool use and care

  • Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
  • Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
  • Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
  • Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
  • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
  • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
  • Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5) Service

  • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Special Warnings for Spray Gun

  • Keep your workplace clean and tidy. Never use the tool in hazardous areas that contain flammable liquids, gasses or dusts.
  • Only use paints, solvents or other materials with a flash point of 73°F(22°C) or higher.
  • Never point the spray gun at other person or animal. In the event of an injury, seek immediate medical attention.
  • Always read the paint manufacturer's thinning instructions before use.
  • You must clean the spray gun thoroughly after each use.
  • Do not pull the power cord to move this tool.

Symbol Explanation

SymbolDescription
Exclamation mark in triangleDenotes risk of personal injury or damage to the tool.
Open book iconRead instruction manual before use.
Crossed out trash can iconDo not dispose of power tools and batteries/rechargeable batteries into household waste! Dispose the products according to the regulation and requirement of local council.
Double square iconDouble insulation. Class II device. The device must not be earthed.
Ear, eye, and lung protection iconsWear hearing protection. Wear eye protection. Wear breathing protection.
Wear gloves.

Parts Description

Diagram of DEKO HVLP Spray Gun components including LED light switch, hook and handle, accessory box, jog wheel, spray nozzle, union nut, air cap, spray jet, paint container, trigger, flow control knob.

Main components of the DEKO HVLP Spray Gun.

  • LED light switch: Controls the integrated LED light for improved visibility.
  • Hook and handle: For carrying and hanging the spray gun.
  • Accessory box: Integrated storage for nozzles and spanner.
  • Jog wheel: Adjusts spray width.
  • Spray nozzle: Interchangeable nozzles for different spray patterns and paint types.
  • Union nut: Secures the spray nozzle assembly.
  • Air cap: Directs the airflow for atomization.
  • Spray jet: Part of the nozzle assembly that shapes the spray pattern.
  • Paint container: Holds the paint or other liquid.
  • Trigger: Activates the spray function.
  • Flow control knob: Adjusts the paint volume.
  • Cleaning needle: For clearing clogged nozzles.
  • Shoulder strap: For portable carrying.
  • Viscosity cup: Used to measure paint viscosity.
  • Spanner: For tightening and loosening parts.

Product Specifications

The DEKO HVLP Spray Gun is available in two main models, DKSG60K1 (AC powered) and DKSG20K3Y (DC powered/cordless). Please refer to the specific model for accurate specifications.

Model: DKSG60K1 (AC Powered)

FeatureSpecification
Voltage220-240V~50Hz / 110-120V~60Hz
Motor Power600W
Rated Speed32000 RPM
Max. Viscosity80 DIN-Secs
Container Volume1200ml
Nozzle Size1.0mm / 1.8mm / 2.5mm
LED VoltageDC16-20V
LED Color Temperature7200-8000K
LED Power Consumption4W
RA-Color Rendering Index70-75Ra
LED Electric Current200mA
LED Lumen230-250LM
Product Weight1.5kg

Model: DKSG20K3Y (DC Powered/Cordless)

FeatureSpecification
Voltage20V
Battery1.5A
Rated Speed32000 RPM
Max. Viscosity60 DIN-Secs
Container Volume1200ml
Nozzle Size1.0mm / 1.8mm / 2.5mm
LED Color Temperature7000-7500K
LED Power Consumption4W
RA-Color Rendering Index70-75Ra
LED Electric Current200mA
LED Lumen180-220LM
Product Weight1.95kg

Note: Two models are shipped randomly. Please check your product packaging for the exact model received.

Intended Use

This spray gun is suitable for painting surfaces such as furniture, fences, doors, windows, walls, ceilings, and cars. It is designed for home DIY usage.

Setup

1. Material Preparation

  1. Cover all surfaces and objects that you do not want to spray.
  2. Select the appropriate spray nozzle size depending on the specific projects. The product comes with 3 nozzle and spray jet sets: 1.8mm, 1.0mm and 2.5mm. One is on the machine and the other two are in the accessory box. Use the provided spanner if necessary.
    • Turn the union nut counterclockwise and remove it from the tool.
    • Change the nozzle and spray jet.
    • The smaller the nozzle size, the finer and higher quality; the larger the nozzle size, the larger the spray volume.
  3. Mix the paint well and check the viscosity using the provided viscosity cup. Refer to the thinning chart below for guidance:
    MaterialRun Out Time (Sec)
    Oil enamel25-60
    Oil based primer30-60
    Oil stainNo thinning required
    Clear sealerNo thinning required
    PolyurethaneNo thinning required
    Varnish20-60
    Lacquer sanding sealer25-35
    Lacquer25-35
    Automotive finishes20-40
    Latex45-90
    Image showing paint being poured into the viscosity cup and then into the spray gun container.

    Proper paint thinning and filling process.

  4. Unscrew the paint container from the gun and pour the paint into the container.

2. Assembly and Setting

  1. Adjust the direction of the suction tube correctly, enabling the entire content in the container to be used.
  2. Screw the container tight to the spray attachment.
  3. Connect the gun part with the motor body:
    • Hold the gun with one hand and press the latch in the direction of the arrow.
    • At the same time hold the motor handle with the other hand and rotate it counterclockwise 90° until you hear it click into its place.
  4. Flow control knob:
    • Turn the knob to "-" to decrease paint volume.
    • Turn the knob to "+" to increase paint volume.
  5. Spray width adjustment: Adjust the required spray width according to the spraying environment to reduce waste and save material.
    • To shorten the width, turn the jog wheel counterclockwise.
    • To adjust the screw to right to increase spray width, turn the jog wheel clockwise.
  6. Adjusting Spray Pattern: You can adjust the spray patterns by turning the Air Cap. Please select appropriate spray patterns to the direction of the job.
    • Horizontal oval pattern to spray in vertical direction.
    • Circular pattern to spray on detailed work.
    • Vertical oval pattern to spray in horizontal direction.
    Image showing the three spray patterns: horizontal oval, circular, and vertical oval.

    Demonstration of adjustable spray patterns.

Operating Instructions

  1. Depress the trigger to start the tool. Information: the paint is not moved until the trigger has been fully depressed.
  2. Before you start work, do a test spray. Use a piece of cardboard or the practice poster in order to make the right adjustments.
  3. Work at an even distance to the surface and at a constant speed for best results.
Image demonstrating correct and incorrect spray techniques, showing even application versus uneven application.

Correct spraying technique for even coverage.

Other Functions

  • LED Light: Adjust the position of the LED light to suit your project. The LED light can be folded and retracted if not in use.
  • Hook and Portable Place: A shoulder strap can be hung on the hook and used on the shoulder. The hand-held place is used for more convenient access to the spray gun.
  • Accessory Box: Store nozzles and the spanner in the integrated accessory box.
Image showing the LED light in use and the portable strap attached to the spray gun.

LED light for visibility and portable strap for ease of use.

Cleaning and Maintenance

WARNING: The spray gun must be cleaned thoroughly after each use.

Remove the gun part from the motor body:

  1. Hold the gun with one hand and press the latch in the direction of the arrow.
  2. At the same time hold the motor handle with the other hand and rotate it counterclockwise 90°.
  3. Pull out to remove the motor from the spray gun.

Disassemble the gun part:

  1. Remove the paint container and suction tube.
  2. Unscrew the union nut, air cap, nozzle and spray jet. Clean all the parts thoroughly under fresh water.

Assemble the gun part:

Put fresh water into the paint container and connect the gun part with the motor body. Pull the trigger and spray fresh water for 30-60 seconds to clean the inner components.

Troubleshooting

ProblemCauseSolution
A. Little or no material flow1. Nozzle clogged
2. Suction tube clogged
3. Material volume setting turn too far to the right
4. Suction tube loose
5. Material is too thick
6. Inconsistent paint
7. Container is loose
1. Clean
2. Clean
3. Turn to the left
4. Insert
5. Check viscosity
6. Strain paint
7. Tighten the container
B. Material leaking1. Nozzle loose
2. Nozzle worn
3. Nozzle seal worn
4. Material build-up on spray pattern dial and nozzle
1. Tighten
2. Replace
3. Replace
4. Clean
C. Atomization is too coarse1. Viscosity of material too high
2. Material volume too large
3. Nozzle clogged
4. Too little pressure build-up in container
1. Thin
2. Turn to the right
3. Clean
4. Tighten container
D. Spray jet pulsates1. Material in container running out
2. Material is too thick
1. Refill
2. Check viscosity
E. Pattern runs or sags1. Applying too much material1. Adjust material flow or increase movement of spray gun
F. Too much over-spray1. Gun too far from spray object
2. Too much material applied
1. Reduce distance
2. Turn material volume setting to right
G. Pattern is very light and splotchy1. Moving the spray gun too fast1. Adjust material flow or decrease movement of spray gun
H. Large cloud of paint1. Gun too close to surface1. Move gun away from surface and reduce paint flow

User Tips

  • For optimal performance, ensure paint is properly thinned according to the manufacturer's instructions and tested with the viscosity cup.
  • When using the cordless model (DKSG20K3Y), consider purchasing an additional battery for extended work sessions, as battery life can vary with usage.
  • The spray gun is versatile and can be used for various painting tasks, including car painting, as confirmed by user feedback.
  • Always check the voltage compatibility (110V or 220V) of your specific model before use, especially if you are in a region with different electrical standards.
  • Thorough cleaning after each use is crucial to prevent clogging and maintain the spray gun's efficiency and longevity.

Warranty and Support

This tool is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 2 years from the original purchase date.

If the tool should fail someday in spite of our quality controls and materials, only have it repaired by an authorized electrician or contact your local distributor or service agent.

You can also contact us by emails: services@dekotools.com, support@dekotools.com

The warranty will not apply to the following cases:

  • Where this product has been subjected to misuse, abuse, accident or want of care.
  • Where this product has been used for a purpose for which it was not designed or is not suited.
  • Where the service of this product has been undertaken by a non-authorised person or company or if non-approved parts have been used.
  • Components that are subject to natural wear and tear caused by use in accordance with operating instructions.

Disposal

The machine and packaging should be sorted for environmental-friendly recycling. Do not dispose of power tools into household waste! Please recycle them at collection points provided for the purpose. Ask your local authority for information about recycling.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.