LS VISION LS-CS3

Contents

LS VISION Dual Screen Solar PTZ Security Camera User Manual

Model: LS-CS3 | Brand: LS VISION

1. Introduction

Thank you for choosing the LS VISION Dual Screen Solar PTZ Security Camera. This advanced outdoor camera offers comprehensive surveillance with its dual lens system, solar power capabilities, and flexible connectivity options (4G or WiFi). Designed for ease of use and robust performance, it features human auto-tracking, two-way audio, full-color night vision, and IP66 waterproofing. This manual provides essential information for setting up, operating, and maintaining your camera to ensure optimal performance and security.

2. Safety Information

  • Ensure the camera is installed securely to prevent accidental falls.
  • Avoid exposing the camera to extreme temperatures outside its operating range.
  • Keep the solar panel clean and free from obstructions to ensure efficient charging.
  • Do not attempt to disassemble or modify the camera, as this will void the warranty and may cause damage.
  • Use only the provided charging cable and accessories.

3. Package Contents

Please check the package to ensure all items are present and in good condition:

  • Camera Unit (x1)
  • Solar Panel (x1)
  • Instruction Manual (x1)
  • Mounting Bracket (x1)
  • Screw Accessories (x1 package)
  • Charging Cable (x1)
Package contents of LS VISION Solar PTZ Camera
Figure 3.1: Included components in the package.

4. Product Overview

The LS VISION Solar PTZ Camera features a robust design with a dual-lens system for comprehensive coverage. Below is a diagram highlighting the main components:

Diagram of LS VISION Solar PTZ Camera components
Figure 4.1: Product details and labeled components.
  • Solar Panel: Provides continuous power to the camera.
  • Antenna: For WiFi or 4G signal reception.
  • Fixed Lens: Upper lens for wide-angle monitoring.
  • PTZ Lens: Lower lens with pan/tilt/zoom capabilities.
  • White Light & IR Light: For full-color and infrared night vision.
  • PIR Sensor: Passive Infrared sensor for motion detection.
  • Memory Card Slot: Supports TF card up to 128GB.
  • 4G Card Slot: (Only for 4G version) For inserting a 4G SIM card.
  • Reset Key: For factory reset.
  • Charging Interface: For initial charging or backup power.
  • ON/OFF Switch: Power control for the camera.

5. Setup

5.1 Initial Charging

Before first use, fully charge the camera's built-in battery for approximately 10 hours using the provided charging cable. This ensures the camera has sufficient power for initial setup and operation.

5.2 App Installation

Download and install the V380 Pro app on your mobile device (available for iOS and Android). This app is essential for camera configuration, live viewing, and accessing all features.

5.3 Network Connection

Your camera comes in two versions: WiFi or 4G. Ensure you have the correct version for your intended use.

5.3.1 WiFi Version

  • The WiFi version connects to your home's 2.4GHz WiFi network (5G WiFi is not supported).
  • Follow the in-app instructions to connect the camera to your WiFi network.
WiFi Camera Version setup diagram
Figure 5.1: WiFi Camera Version connection.

5.3.2 4G SIM Card Version

  • The 4G version requires a 4G SIM card for connection and does not support WiFi.
  • Insert a compatible 4G SIM card into the designated slot on the camera.
  • Note: The 4G version does not support service in Chile, Brazil, Japan, USA, Canada, Mexico, Colombia, Peru, and other American countries. Please order the WiFi version if you are in these regions.
4G Camera Version setup diagram
Figure 5.2: 4G Camera Version connection.

5.4 Physical Installation

The camera supports various installation methods, including side mounting and ceiling mounting. Choose a location with optimal sunlight exposure for the solar panel and a clear view of the area you wish to monitor.

  • Use the provided mounting bracket and screw accessories to securely attach the camera to your desired surface.
  • Ensure the solar panel is positioned to receive maximum direct sunlight throughout the day. The 1.8m extension cord allows for flexible placement of the solar panel relative to the camera.
Various installation methods for the solar camera
Figure 5.3: Examples of camera installation methods.

6. Operating Instructions

6.1 Dual Screen Monitoring

The camera features a dual-lens system, allowing you to monitor two different perspectives simultaneously. The V380 Pro app will display both feeds, providing a comprehensive view of your surroundings.

Dual screen monitoring view in app
Figure 6.1: Dual screen monitoring effect.

6.2 PTZ Control

The PTZ (Pan, Tilt, Zoom) lens offers a wide range of motion:

  • Pan: 355 degrees horizontally.
  • Tilt: 100 degrees vertically.
  • Zoom: Up to 10x digital zoom (depending on model).

You can remotely control the camera's movement and zoom through the V380 Pro app to monitor any area of interest.

PTZ control via mobile app
Figure 6.2: Remote PTZ control via the app.

6.3 Recording Modes

The camera offers three working modes to optimize battery life and recording coverage:

  • Low-Power Mode: PIR detection alarm, low power consumption for stable battery life. The device sleeps and triggers alarm recording only when someone passes by.
  • Continuous Recording: The device continues recording when the battery is sufficient.
  • Battery Saving Mode: Always sleep. Only remote wake-up. Ultimate battery life.

You can configure these modes in the V380 Pro app settings.

Three working modes available for the camera
Figure 6.3: Overview of recording modes.
Adaptive power mode details
Figure 6.4: Adaptive power mode, balancing continuous recording and battery life.

6.4 Humanoid Detection and Tracking

The camera utilizes a highly sensitive PIR motion sensor and AI detection to identify human movement, reducing false alarms. When a human is detected, the camera will automatically pan or tilt to follow their movement, ensuring no important moments are missed.

Humanoid detection alarm and notification push
Figure 6.5: Humanoid detection alarm in action.
Human automatic tracking feature
Figure 6.6: Camera lens automatically rotates as a person moves.

6.5 Night Vision

The camera supports two modes of night vision:

  • Infrared Night Vision: Provides clear black and white images in low light or complete darkness.
  • Full-Color Night Vision: When a moving object is detected, the camera can automatically switch to white light mode to capture full-color video.
Infrared and full-color night vision comparison
Figure 6.7: Comparison of infrared and intelligent full-color night vision.

6.6 Two-Way Audio Communication

The built-in microphone and speaker allow for two-way voice intercom. You can communicate with visitors or deter intruders directly through the V380 Pro app from anywhere.

Two-way voice intercom feature
Figure 6.8: Using two-way voice intercom.

6.7 Pre-set Position Settings

You can set up to 6 preset positions within the app. This allows you to quickly navigate the camera to specific areas with a single tap, enhancing monitoring efficiency.

Pre-set position settings in the app
Figure 6.9: Setting and recalling pre-set positions.

6.8 Activity Alarm Area

Define specific activity alarm areas within the camera's field of view using the mobile app. The camera will only trigger alerts and recordings when motion is detected within these designated zones.

Setting activity alarm area in the app
Figure 6.10: Configuring activity alarm areas.

6.9 Storage Options

The camera supports two storage methods for recorded video:

  • SD Card Storage: Supports a TF (MicroSD) card up to 128GB (not included). Recordings are saved locally.
  • Cloud Storage: A paid subscription service that allows you to store recordings securely in the cloud, accessible from anywhere.

When motion is detected, the camera will quickly activate and record video, saving it to either the SD card or cloud storage based on your configuration.

SD card and cloud storage options
Figure 6.11: Two storage modes available.

6.10 Sharing with Other Users

You can share access to your camera with family members or other trusted users through the V380 Pro app. This allows multiple individuals to view live feeds and receive alerts.

Sharing camera access with multiple users
Figure 6.12: Sharing equipment with other users.

7. Maintenance

7.1 Weather Resistance

The camera is rated IP66 waterproof, making it resistant to rain, snow, and dust. It is designed to operate reliably in various outdoor weather conditions.

IP66 waterproof feature of the camera
Figure 7.1: IP66 Waterproof, sunscreen, and dustproof.

7.2 Solar Panel Care

To ensure efficient solar charging, periodically clean the surface of the solar panel to remove any dirt, dust, or debris that may accumulate. A clean panel ensures maximum sunlight absorption and optimal battery performance.

High-efficiency solar panel charging
Figure 7.2: High-efficiency solar panel with built-in large capacity battery.

8. Troubleshooting & FAQ

Common Questions and Solutions:

  • Q: What app does the camera use?
    A: The camera uses the V380 Pro app, available for both iOS and Android devices.
  • Q: Can I use my own data SIM card with the 4G version?
    A: Yes, the 4G version is designed to work with a compatible 4G SIM card. However, please note the regional restrictions mentioned in Section 5.3.2.
  • Q: Does the 4G version work in Chile/Brazil/USA/Canada/Mexico/Colombia/Peru?
    A: No, the 4G version does not support these countries. For these regions, please use the WiFi version.
  • Q: Does the camera support both 4G and WiFi simultaneously?
    A: No, the camera comes in two distinct versions: one supports WiFi connectivity only, and the other supports 4G SIM card connectivity only. They are not interchangeable.
  • Q: Is the V380 Pro app free to use?
    A: The basic functionality of the V380 Pro app for live viewing and device control is generally free. However, cloud storage is a paid subscription service.
  • Q: How do I charge the battery after initial setup?
    A: The camera is primarily charged by its solar panel. Ensure the solar panel receives adequate sunlight. For initial setup or if the battery is very low, you can use the provided charging cable.
  • Q: Does this camera have Bluetooth?
    A: Bluetooth functionality is not specified for this model.

9. Specifications

FeatureSpecification
Model NumberLS-CS3
Brand NameLS VISION
Power SupplySolar Powered (Built-in 10800mAh Battery)
Solar Panel Power8W (with 1.8m extension cord)
ConnectivityWIFI (2.4GHz, IEEE 802.11 b/g/n) or 4G (version dependent)
Supported Mobile SystemsIOS, Android
APPV380 Pro
Lens (mm)3.6mm + 3.6mm (Dual Lens)
Focal Length2.8mm
Viewing Angle360° (PTZ: Pan 355°, Tilt 100°)
SensorCMOS
Sensor Size1/2.7"
TechnologyInfrared, Pan / Tilt / Zoom
Night VisionInfrared & Full-Color (White Light)
IR Distance20 meters
Audio Output1CH BNC (Two-way voice intercom)
Internal StorageSupports TF Card up to 128G, Cloud Storage (paid)
Alarm TypeLocal Alarm (PIR+AI Humanoid Detection)
InstallationSide, Ceiling, Normal
Waterproof RatingIP66
CertificationCE
OriginMainland China

10. User Tips

  • For optimal battery life, utilize the 'Low-Power Mode' and ensure the solar panel receives ample direct sunlight.
  • Take advantage of the 'Pre Set Position Settings' to quickly monitor key areas without manual PTZ adjustments.
  • Define 'Activity Alarm Areas' in the app to focus motion detection on critical zones and minimize unnecessary alerts.
  • Regularly check the solar panel for cleanliness to maintain charging efficiency.
  • If using the 4G version, confirm SIM card compatibility with your local network provider and ensure you are not in an unsupported region.

11. Warranty & Support

Your LS VISION Dual Screen Solar PTZ Security Camera comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards.

For any technical assistance, questions, or support needs, please contact our customer service. We provide 7/24 technical support service to assist you with any issues you may encounter.

1 Year Warranty information
Figure 11.1: Warranty and support details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.