1. Introduction
The LAUNCH CRP919XBT inherits LAUNCH's advanced diagnosing technology, characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test results. It achieves full car model and full system vehicle trouble diagnosis through simple wireless/wired communication between the VCI (Vehicle Communication Interface) device and the display tablet.
Key features include:
- Intelligent Diagnose: Uses VIN information to access vehicle data (including historical diagnostic records) from the cloud server for quick tests, eliminating manual menu selection.
- Local Diagnose: Guides step-by-step through diagnostic sessions.
- Service Function: Offers coding, reset, relearn, and other service functions to restore vehicles to functional status after repair or replacement.
- One-click Update: Allows online updates for diagnostic software.
- Diagnostic History: Provides quick access to previously tested vehicles, allowing users to view reports or resume operations.
- Feedback: Enables submission of vehicle issues for analysis and troubleshooting.
- Testable Models: Quick access to view supported vehicle models.
- All System Diagnosis: Comprehensive scanning of engine, AT, ABS, TPMS, Fuel, BCM diagnostic data.
- 31 Reset Services: Includes A/F Reset, Brake Reset, Oil Reset, SAS Reset, Battery Reset, ABS Bleeding, Electric Throttle Relearn, TPMS Reset, DPF Regeneration, EGR Adaption, AC System Relearn/Initialization, Adblue Reset, AFS Reset, Coolant Bleed, Engine Power Balance Monitoring, Gear Learn, Gearbox Learn, High Voltage Battery Diagnostics, IMMO, Injector Coding, Language Change, NOX Sensor Reset, Seats Calibration, Stop/Start Reset, Sunroof, SUS Reset, Transport Mode, Type Reset, Windows Calibration, Intelligent Cruise Control System Reset, Gas Particulate Filter Regeneration.
- Active Test (Bi-Directional Test): Output commands to the ECU to turn on/off actuators (e.g., radiator fan, throttle, windows, mirrors, lights, horn, door lock) to diagnose subsystem faults.
- ECU Coding: Match, relearn, and code newly installed ECU modules; change market-specific settings to activate/disable car functions.
- Support CANFD & DOIP
- Support FCA (AutoAuth)
- Support Guided Functions
- Connect to the car via Bluetooth VCI
- Two Years Free Update & Five Years Warranty & Lifetime Free Tech Support.
- 24 Kinds of Languages Support
- Global Version (no IP limit)
- Support 100+ Car Brands Diagnosis
- Compatible with BST360 battery tester and i-TPMS.
2. Package List
The following items are included in your LAUNCH CRP919XBT package. Please check the contents upon receipt.
- 1* CRP 919X BT Display Tablet
- 1* DBScar VII VCI Connector
- 1* OBDII Diagnostic cable
- 1* 5V DC Charging Adaptors & Cable
- 1* Power adaptor
- 1* Quick start Guide
- 1* User's Manual (this document)
- 1* Password envelope (containing Serial Number and Activation Code)
- 1* Type-A to Type-C USB cable
- 1* LAUNCH Suitcase
Figure 2.1: LAUNCH CRP919XBT Full Package Contents
Figure 2.2: LAUNCH CRP919XBT Tablet and VCI Connector in Carrying Case
3. Components & Controls
The diagnostic system consists of two main components: the Display Tablet and the VCI Device.
3.1 Display Tablet
The tablet acts as the central processing system, receiving and analyzing live vehicle data from the VCI device and outputting test results.
Figure 3.1: LAUNCH CRP919XBT Display Tablet and VCI Connector
Display Tablet Features:
- Microphone: For audio input.
- Type-A USB Port: Connects to VCI connector for diagnosis via USB cable or to external USB storage.
- Type-C USB Port: Connects to AC outlet for charging or to PC for data exchange.
- POWER Key: Press for 3 seconds to turn on/off; single press to activate/turn off LCD; press and hold for 8 seconds for forced shutdown.
- LCD Screen: Displays test results and user interface.
- Speakers: For audio output.
- Rear Camera: For capturing images/videos.
3.2 VCI Connector (DBScar VII)
The VCI connector serves as a vehicle communication interface, connecting to the vehicle's DLC (Data Link Connector) socket via the diagnostic cable to read vehicle data and send it to the tablet.
VCI Connector Features:
- OBD-15 diagnostic connector: Connects to vehicle's OBD II DLC.
- USB port: Connects the VCI to the tablet for vehicle diagnosis via USB cable.
- I/O indicator: Illuminates blue for wireless communication with tablet, red for USB connection.
- VEHICLE indicator: Illuminates green and flashes when communicating with the vehicle.
- POWER indicator: Illuminates solid red when powered up.
4. Specifications
4.1 Display Tablet
- Operating System: Android 10.1
- Processor: 2.0 Ghz, Powerful Quad-Core Processor
- RAM: 4GB
- ROM: 64GB
- Resolution: 1024*600
- Display: 7 inch IPS touch screen
- Camera: Rear 8 Million Pixels
- Connectivity: Bluetooth, 2.4GHz Wi-Fi (802.11a/b/g/n/ac)
- Battery: 6300mAh lithium-polymer battery
- Battery Life: More than 8 hours
- Product Size: 218*154*39.5 mm
- Product Net Weight: 900g
- Working Temperature: 0°C ~ 50°C
- Storage Temperature: -20°C ~ 70°C
4.2 VCI Connector (DBScar VII)
- Working Voltage: DC 9V -18V
- Power Consumption: ≤2.0W
- Connection: Bluetooth
- Size: 118.3*69.5*32 mm
- Working Temperature: 0°C ~ 50°C
- Relative Humidity: 20% ~ 90%
4.3 Certifications
- FCC ID: XUJX431PROV5
- Certification: CE
5. Setup and Initial Use
5.1 Charging & Turning On
- Use the included power adaptor to charge the tablet.
- After charging is complete, press the POWER button for 3 seconds to turn the tablet on. The system will initialize and enter the home screen.
Note: If the battery is completely discharged, it may take up to 5 minutes of charging before the tool can power on.
Warning: Always use the included power adaptor. Using other adaptors may cause damage.
5.2 Screen Layout & Basic Gestures
The bottom of the screen features five on-screen buttons:
- Home: Navigates to the Android home screen.
- Recent App: Views running applications.
- VCI Connection: Indicates VCI device connection status (green for established communication).
- Screenshot: Captures the current screen.
- Back: Returns to the previous screen.
Basic gestures for interaction:
- Single-tap: Select an item or launch a program.
- Double-tap: Zoom in on text or images.
- Long press: Tap and hold for contextual menus.
- Slide: Navigate between pages.
5.3 System Settings
To access system settings, tap Other Modules -> Settings on the home screen.
- Change System Language: Navigate to System -> Language & input -> Languages. Add and drag your desired language to the top.
- Adjust Brightness: Go to Display -> Brightness level and adjust the slider. (Reducing brightness conserves battery).
- Set Standby Time: Go to Display -> Advanced -> Sleep and choose the desired sleep time.
- Network Setup (Wi-Fi): Go to Network & Internet -> WLAN. Turn on Wi-Fi, select a network, and enter password if required.
5.4 Registration & Update
New users must register before using the tool.
- Tap Login on the upper right corner of the home screen.
- Tap New Registration.
- Fill in the required information (Username, Password, Email, Country).
- Tap Activate after entering the 12-digit Product Serial Number and 8-digit Activation Code from the password envelope.
- After successful registration, the wireless communication between the tablet and VCI is automatically established.
- Tap OK to navigate to the update center to download available software.
Note: If you forget your password, tap Retrieve password on the login screen and follow the on-screen instructions.
5.5 Vehicle Connection
Ensure the vehicle ignition is ON, battery voltage is 11-14 volts, and the throttle is closed.
5.5.1 Finding the DLC (Data Link Connector)
The DLC is usually located 12 inches from the center of the instrument panel, under or around the driver's side. For specific vehicle models, refer to the vehicle's service manual.
5.5.2 Connecting to OBD II Vehicles
- Use the included diagnostic cable (HDB15F to HD15F data cable + HD15M to OBD II adaptor) to connect the VCI to the vehicle's DLC port.
5.5.3 Connecting to Non-OBD II Vehicles
- Select the appropriate non-16pin adaptor (sold separately) for the vehicle's DLC port type.
- Loosen the captive screws of the HDB15F to HD15F data cable and disconnect the HD15M to OBD16 adaptor.
- Connect the data cable with the target adaptor and tighten the screws.
Note: If the DLC pin is damaged or has insufficient power, power can be supplied via a Battery Clamps Cable or Cigarette Lighter Cable (not included).
Figure 5.1: VCI Connection to Vehicle
6. Operating the Diagnostic Tool
6.1 Intelligent Diagnose
This function automatically identifies the vehicle's VIN and retrieves diagnostic records from the cloud server, guiding you to the vehicle information page without manual menu selection.
- Tap Intelligent Diagnose on the Home screen.
- The tablet will pair with the VCI and read the vehicle VIN.
- If VIN is found, you can tap Diagnostic to start a new session or Scan History to view past records.
- If VIN is not found, you can manually enter the VIN or use the VIN recognition module (camera scan).
Note: A stable network connection is required for Intelligent Diagnose.
6.2 Local Diagnose
This mode requires manual menu selection to proceed with diagnostics.
- Tap Local Diagnose on the Home screen.
- Select the vehicle region (American, European, Asian, Chinese) or view all brands.
- Choose the desired vehicle make and model.
- Turn the ignition key to ON.
- Confirm vehicle information.
- Select the desired test item (e.g., Health Report, System Scan, System Selection).
6.2.1 Health Report (Quick Test)
Quickly scans all electronic control units and generates a detailed vehicle health report.
- From the test item selection screen, tap Health Report.
- The system will scan ECUs. Fault codes will appear in red, normal systems in black.
- On-screen buttons: Enter (to function selection), Report (to save), Help, Clear DTCs.
Note: Clearing DTCs does not fix the underlying problem. Repairs must be made to prevent codes from reappearing.
6.2.2 System Scan
Scans for installed systems on the vehicle.
- From the test item selection screen, tap System Scan.
- The system will display a list of equipped systems.
6.2.3 System Selection
Manually select a test system and function step-by-step.
- From the test item selection screen, tap System Selection.
- Tap the target system (e.g., PCM) to navigate to its diagnostic function screen.
6.2.4 Read Fault Code
Displays detailed information of DTCs retrieved from the vehicle's control system.
- On the diagnostic function selection screen, tap Read Fault Code.
- The screen will display diagnostic results.
- On-screen buttons: Freeze Frame (view conditions when DTC was set), Help, Code Search, Report.
Caution: Never replace a part based only on the DTC definition. Always follow testing procedures in the vehicle's service manual.
6.2.5 Clear Fault Code
Erases codes from the vehicle after repairs. Ensure ignition is ON and engine is OFF.
- On the diagnostic function selection screen, tap Clear Fault Code.
- Confirm by tapping YES.
Note: After clearing, retrieve codes again to confirm no issues remain.
6.2.6 Read Data Stream
Views and records real-time Live Data (Parameter Identification Data - PID) from sensors, actuators, and switches.
- On the diagnostic function selection screen, tap Read Data Stream.
- Select desired items using Select Page or Select All, then tap OK.
- Data can be viewed in Value (default list), Graph (waveform), or Combine (multiple graphs for comparison) modes.
- Tap Record to start recording diagnostic data.
Caution: If driving is required for troubleshooting, always have a second person operate the tool to avoid accidents.
6.2.7 Actuation Test
Accesses vehicle-specific subsystem and component tests, allowing the tablet to output commands to the ECU to drive actuators.
- On the diagnostic function selection screen, tap Actuation Test.
- Follow on-screen instructions and make selections to complete the test.
Video 6.1: Demonstration of Actuation Tests on Audi (activation of park assist).
6.3 Service (Reset) Functions
The tool offers 31 service functions to help vehicles return to functional status after repairs or replacements. Available tests vary by vehicle.
| Function | Description / When to Perform |
|---|---|
| Maintenance Light Reset (Oil Reset) | Resets oil service light after oil change or when oil life system is reset. |
| Electronic Parking Brake Reset (BRAKE RESET) | Resets brake pad after replacement, or when brake pad indicator is on/shorted, or servo motor replaced. |
| Steering Angle Reset (SAS Reset) | Resets steering angle after replacing sensor, steering parts, four-wheel alignment, or car body recovery. |
| ABS Bleeding | Performs bi-directional tests for ABS, especially when ABS contains air or components are replaced. |
| Crank Position Sensor Adaptive Learning (GEAR LEARN) | Performs tooth learning to turn off MIL after engine ECU, crankshaft position sensor, or flywheel replacement. |
| Anti-theft Matching (IMMO) | Performs anti-theft key matching when ignition switch key, ignition switch, instrument panel, ECU, BCM, or remote control battery is replaced. |
| Injector Coding (INJECTOR) | Writes or rewrites injector actual code in the ECU after ECU or injector replacement. |
| Battery Matching (BAT. RESET) | Resets battery monitoring unit after main battery or battery monitoring sensor replacement. |
| DPF Regeneration (DPF REG.) | Clears PM from DPF filter after sensor/trap/nozzle/oxidizer replacement, or when DPF MIL is on. |
| Throttle Matching (ELEC. THROTTLE RLRN) | Makes initial settings to throttle actuators and returns learned values to default state. |
| Gearbox Matching (GEARBOX) | Completes gearbox self-learning after disassembly or repair. |
| Headlight Matching (AFS RESET) | Initializes the adaptive headlamp system. |
| Sunroof Initialization (SUNROOF) | Sets sunroof lock, closed-when-rain, sliding/tilting memory, temperature threshold. |
| Suspension Level Calibration (SUS RESET) | Adjusts body height after replacing height sensor or control module, or when vehicle height is incorrect. |
| EGR Adaption | Learns EGR valve after cleaning or replacement. |
| Seats Calibration | Matches seats with memory function after replacement or repair. |
| Tyre Reset | Sets size parameters of modified or replaced tire. |
| Coolant Bleed | Activates electronic water pump before venting the cooling system. |
| AdBlue Reset (Diesel Engine Exhaust Gas Filter) | Required after diesel exhaust treatment fluid (car urea) is replaced or filled up. |
| NOx Sensor Reset | Resets catalytic converter learned value after NOx fault re-initialization or catalytic converter replacement. |
| AC System Relearn/Initialization | Must be performed when vehicle AC ECU or actuator is replaced or ECU memory is lost. |
| High Voltage Battery Detection | Used for high voltage battery diagnosis and status information detection. |
| Windows Calibration | Performs door window matching to recover ECU initial memory and automatic ascending/descending function. |
| Language Change | Changes system language of vehicle center console. |
| A/F Reset | Sets or learns air/fuel rate parameters. |
| Transport Mode | Deactivates transport mode to restore normal vehicle function after power saving mode. |
| Stop/Start Reset | Opens or closes automatic Start/Stop function via hidden function setting in ECU. |
| Intelligent Cruise Control System Reset | Matches intelligent cruise control module after replacement or repair. |
| Engine Power Balance Monitoring | Monitors crankshaft acceleration to determine relative power per cylinder. |
| Gas Particulate Filter (GPF) Regeneration | Performs GPF replacement or regeneration when fuel consumption increases or engine output power reduces. |
| Motor Angle Calibration | Performs motor angle calibration when rotor position detected by sensor differs from actual rotor field position. |
7. Maintenance
7.1 Software Update
This module allows you to update diagnostic software, apps, and frequently used software.
- Go to Software Update on the Home screen.
- Tap the Downloaded tab to see available updates.
- Software is categorized into Common, Frequently used vehicle, and Other vehicle software.
- Tap Update to start downloading and installation.
7.2 Renew Subscription
If your software subscription is due or expires, you will be prompted to renew it.
- Tap Renewal on the bottom of the screen.
- Choose a payment method: PayPal, Subscription Renewal Card, or Credit Card.
- Follow the on-screen instructions to complete the payment.
- After payment, go to the update center to update diagnostic software.
7.3 User Info & Other Modules
These sections provide tools for managing your device and data:
- My Report: View, delete, or share saved diagnostic reports and records.
- VCI Management: Deactivate pairing with VCI device via Bluetooth.
- Activate VCI: Activate the VCI device if skipped during initial setup.
- Firmware Fix: Upgrade and fix diagnostic firmware. Do not interrupt power during this process.
- Testable Models: Check the vehicle models covered by the tool.
- Tablet Setting: Quick access to Android system settings.
- Files: File & application manager.
- System OTA Upgrade: Perform wireless system updates.
- Recording Master: Record tablet screen video.
- Calculator, Browser, Gmail, Camera, Gallery: Standard utility applications.
- Clear Cache: Clears App cache and restarts the App.
- Login/Logout: Manage user sessions.
- Diagnostic Software Clear: Hide/clear infrequently used diagnostic software.
8. Troubleshooting (FAQ)
8.1 How to save power?
- Turn off the screen when the tool is idle.
- Set a shorter standby time.
- Decrease the brightness of the screen.
- Turn off WLAN connection if not required.
- Disable GPS function if not in use.
8.2 Communication error with vehicle ECU?
- Confirm the VCI is correctly connected.
- Confirm the ignition switch is ON.
- If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN to customer support.
8.3 Failed to enter into vehicle ECU system?
- Confirm the vehicle is equipped with this system.
- Confirm the VCI is correctly connected.
- Confirm the ignition switch is ON.
- If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN to customer support.
8.4 How to download the Diagnostic App after resetting the tablet?
- Launch the browser and go to www.x431.com.
- Tap Login, input your username and password, then tap Log In.
- Confirm the serial number is correct, tap APP application program and tap the Download icon.
- After download, follow on-screen instructions to install.
- Login with existing credentials and go to the update center to download diagnostic software.
8.5 What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If it still displays in English, the software for that language may be under development.
8.6 How to retrieve the login password?
- Tap the application icon on the home screen.
- Tap Login on the upper right corner.
- Tap Retrieve password and follow the instructions.
9. User Tips
- Regularly check for software updates to ensure compatibility with the latest vehicle models and diagnostic features.
- Always ensure a stable Wi-Fi connection when performing updates or using cloud-based features like Intelligent Diagnose.
- Keep the VCI connector and diagnostic cables clean and free from oil, water, or grease to ensure reliable connections.
- For complex diagnostic procedures, always consult the vehicle's service manual in conjunction with the tool's instructions.
- Utilize the 'Diagnostic History' feature to keep track of past repairs and vehicle health over time.
- When performing 'Actuation Tests', ensure the vehicle is in a safe, well-ventilated area and follow all safety precautions.
10. Warranty & Support
10.1 Warranty Information
LAUNCH® electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is expressly limited to persons who purchase LAUNCH® products for purposes of resale or use in the ordinary course of business.
The warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH shall not be liable for any consequential or incidental damages.
Final determination of defects will be made by LAUNCH according to stipulated procedures.
10.2 Customer Service
If you have any questions regarding the operation of the unit, please contact your authorized tool supplier or customer service center:
- Tel: 86-755-25938674
- E-mail: DOD@cnlaunch.com
11. Important Safety Precautions
To avoid personal injury, property damage, or accidental damage to the product, read all information in this section before using the tool.
11.1 DANGER
- When an engine is operating, ensure the service area is well-ventilated or use an exhaust removal system. Engines produce poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.) that can cause serious injury or death.
- Use only the included battery and power adaptor. Risk of explosion if the battery is replaced with an incorrect type.
- DO NOT operate the tool while driving the vehicle. Distraction can cause a serious accident.
11.2 WARNING
- Always perform automotive testing in a safe environment.
- Do not connect or disconnect test equipment while the ignition is on or the engine is running.
- Before starting the engine, place the gear lever in Neutral (manual) or Park (automatic) to avoid injury.
- NEVER smoke or allow sparks/flames near the battery or engine. Do not operate the tool in explosive atmospheres (flammable liquids, gases, heavy dust).
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Wear ANSI-approved eye protection when testing or repairing vehicles.
- Place blocks in front of drive wheels and never leave the vehicle unattended during testing.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs, as these components create hazardous voltage when the engine is running.
- To avoid damaging the tool or generating false data, ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clear and secure.
- Automotive batteries contain sulfuric acid, which is harmful to skin. Avoid direct contact.
- Keep the tool dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
- Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Store the tool and accessories in a locked area out of reach of children.
- Do not use the tool while standing in water.
- Do not expose the tool or power adapter to rain or wet conditions to prevent electric shock.
- This tool is a sealed unit with no end-user serviceable parts. All internal repairs must be done by an authorized repair facility.
- Keep the tool away from magnetic devices, as radiation can damage the screen and erase data.
- Do not attempt to replace the internal rechargeable lithium battery. Contact the dealer for factory replacement.
- Do not disconnect the battery or any wiring cables when the ignition switch is on, as this can damage sensors or the ECU.
- Do not place magnetic objects near the ECU. Disconnect power supply to the ECU before welding operations.
- Use extreme caution when performing operations near the ECU or sensors. Ground yourself when disassembling PROM to prevent static electricity damage.
- When reconnecting the ECU harness connector, ensure it is attached firmly to prevent damage to electronic elements.
12. Legal Information
12.1 Copyright Information
Copyright © 2023 by LAUNCH TECH. CO., LTD (also called LAUNCH for short). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH.
Statement: LAUNCH owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software, LAUNCH will block the use of this product and reserve the right to pursue their legal liabilities.
12.2 Disclaimer of Warranties and Limitation of Liabilities
All information, illustrations, and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice. We shall not be liable for any direct, special, incidental, indirect damages or any economic consequential damages (including the loss of profits) due to the use of the document.
12.3 FCC Statement
FCC ID: XUJX431PROV5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are below the maximum value. End-users must be informed of the operating requirements for satisfying RF exposure compliance.
This device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The RF frequencies can be used in Europe without restriction.