Jasoz Triple HDMI+Displayport KVM Switch

Contents

Jasoz Triple HDMI+Displayport KVM Switch User Manual

Model: Triple HDMI+Displayport KVM Switch

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your Jasoz Triple HDMI+Displayport KVM Switch. This device allows three computers to share three monitors, a keyboard, a mouse, and other USB 3.0 peripherals, streamlining your workspace and enhancing productivity. It supports high-resolution video output up to 8K@60Hz and 4K@144Hz.

2. Package Contents

Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

  • 1x Triple Monitor USB 3.0 HDMI+DP KVM Switch
  • 3x USB 3.0 Cables (1.5m/4.9ft)
  • 1x Wired Remote Controller (1.52m/5ft)
  • 1x DC12V Power Adapter (1.52m/5ft)
  • 1x User Manual (this document)
Image showing the KVM switch and its included accessories: KVM switch unit, DC12V power adapter, 3 USB cables, and a wired remote controller.
Figure 2.1: Package Contents and Dimensions. The KVM switch measures approximately 4.72 inches (12cm) in length, 2.59 inches (6.60cm) in width, and 1.73 inches (4.40cm) in height.

3. Specifications

Table 3.1: Technical Specifications
FeatureDetail
Product TypeTriple Monitor USB 3.0 HDMI+DP KVM Switch
Input Ports (Per PC)2x DisplayPort 1.4, 1x HDMI 2.1, 1x USB 3.0
Output Ports (To Monitors)2x DisplayPort, 1x HDMI
USB Peripheral Ports4x USB 3.0 (for keyboard, mouse, printer, U disk, etc.)
DisplayPort ResolutionUp to 8K@30Hz, 4K@144Hz, 4K@120Hz (backward compatible)
HDMI ResolutionUp to 8K@60Hz, 4K@120Hz, 4K@60Hz (backward compatible)
USB Data Transfer RateUSB 3.0: Up to 5Gbps (USB 2.0: 480Mbps)
Switching MethodsPhysical button, Wired Remote Controller
Operating SystemsLinux, Windows, Chrome OS, macOS (Driver-free, Plug and Play)
Power SupplyDC12V Power Adapter

Important Notes on Resolution:

  • For optimal performance, use HDMI 2.1 and DisplayPort 1.4 cables.
  • Shorter cable lengths are generally recommended for higher resolutions and refresh rates.

4. Setup and Installation

Follow these steps to correctly set up your KVM switch:

  1. Connect Monitors to KVM Output: Connect your three monitors to the KVM switch's output ports (2x DP OUT, 1x HD OUT).
  2. Connect Computers to KVM Input: For each computer (PC1, PC2, PC3), connect the following cables to the corresponding KVM input section (e.g., INPUT A for PC1):
    • 2x DisplayPort cables (DP A, DP B, DP C)
    • 1x HDMI cable (HD A, HD B, HD C)
    • 1x USB 3.0 cable (USB 3.0 A, USB 3.0 B, USB 3.0 C)

    Note: Ensure that all 2 DisplayPort, 1 HDMI, and 1 USB 3.0 cables are connected from each computer to the KVM switch for proper triple screen display and USB peripheral recognition. If your desktop or laptop lacks the necessary 2 DP + 1 HDMI ports, you may need a reliable adapter or docking station.

  3. Connect USB Peripherals: Plug your keyboard, mouse, printer, U disk, or other USB 3.0 devices into the 4 USB 3.0 ports on the front of the KVM switch.
  4. Connect Wired Remote (Optional): If desired, plug the wired remote controller into the dedicated port on the KVM switch.
  5. Connect Power Adapter: Plug the DC12V power adapter into the KVM switch's power input and then into a power outlet.
  6. Power On: Turn on the KVM switch using the ON/OFF switch, then power on your computers and monitors.
Diagram showing the rear panel of the KVM switch with all input and output ports labeled for three computers and three monitors.
Figure 4.1: KVM Switch Rear Panel Connections. This diagram illustrates how to connect three PCs (PC1, PC2, PC3) to the KVM switch using HDMI, DisplayPort, and USB 3.0 cables, and how to connect three monitors to the KVM's outputs.
Detailed wiring diagram for connecting three computers to three monitors via the KVM switch, including USB peripherals.
Figure 4.2: Comprehensive Connection Diagram. This image provides a visual guide for connecting PCs, monitors, and USB devices to the KVM switch. It also highlights that the KVM supports PC1 output to monitor A, B, or C, PC2 output to monitor A, B, or C, and PC3 output to monitor A, B, or C. It explicitly states: "NOT SUPPORT CROSS OUTPUT: PC1 output to monitor A, PC2 output to monitor B, PC3 output to monitor C."

5. Operating Instructions

5.1 Switching Between Computers

You can switch between the connected computers using two methods:

  • Physical Button Switch: Press the corresponding PC1, PC2, or PC3 button on the front panel of the KVM switch to switch to the desired computer. The three color lights on the KVM indicate the currently active computer.
  • Wired Remote Switch: Use the included wired remote controller to switch between computers. Press the numbered buttons (1, 2, 3) to select the corresponding PC.
Image showing the KVM switch with a hand pressing a physical button and another image showing the wired remote control.
Figure 5.1: Two Switching Ways. This image demonstrates switching between computers using the physical buttons on the KVM unit and using the wired remote control.

5.2 Display Modes (Extended Mode & Copy Mode)

After connecting correctly, you can choose your desired display mode (Extended or Copy) by pressing Window + P on your keyboard. A small window will pop up, allowing you to select the display mode.

  • Extended Mode: In this mode, the three monitors display different images, allowing you to extend your desktop across multiple screens. Windows can be dragged between the three monitors.
  • Copy Mode (Duplicate Mode): In this mode, all three monitors display the same image, duplicating your desktop across all screens.
Image demonstrating Extended Mode with three monitors showing different content and Copy Mode with three monitors showing identical content.
Figure 5.2: Extended Mode and Copy Mode. This image visually explains the difference between Extended Mode (different content on each screen) and Copy Mode (same content on all screens).
Image showing a keyboard and a Windows Project menu with options like PC screen only, Duplicate, Extend, and Second screen only.
Figure 5.3: How to Choose Display Mode. After connecting correctly, press "Window+P" on the keyboard at the same time, and select the display mode from the pop-up small window.

Video 5.1: Demonstration of Extended and Duplicate Display Modes. This video shows a user switching between extended and duplicate display modes on a multi-monitor setup connected via the KVM switch.

6. Troubleshooting

If you encounter issues with your KVM switch, please refer to the following common problems and solutions:

  • No Display on Monitors:
    • Ensure all HDMI and DisplayPort cables are securely connected from the KVM to the monitors and from the computers to the KVM.
    • Verify that the KVM switch is powered on and the correct computer input is selected.
    • Confirm that your computer supports multi-monitor display. You can test this by connecting your PC directly to three monitors (bypassing the KVM). If all three monitors display a screen, your computer supports multi-monitor display.
    • Check if your computer's graphics card has sufficient ports (2 DP + 1 HDMI) and that they belong to a discrete graphics card if applicable.
  • USB Peripherals Not Recognized:
    • Ensure that the USB 3.0 cables are correctly connected from each computer to the KVM switch's USB 3.0 input ports. If these are not connected or are connected incorrectly, USB devices will not be recognized.
    • Try connecting the USB device directly to the computer to confirm it is functional.
  • Incorrect Display Mode (Extended/Copy):
    • After switching to a computer, press Window + P on your keyboard and select the desired display mode (Extend or Duplicate) from the pop-up menu.
  • Cross Output Not Supported:
    • The KVM switch is designed for each PC to output to any of the three monitors (A, B, or C). It does NOT support cross output where, for example, PC1 outputs to monitor A, PC2 to monitor B, and PC3 to monitor C simultaneously in a non-standard configuration. Each active PC will utilize all three connected monitors.
  • Resolution or Refresh Rate Issues:
    • Ensure you are using high-quality HDMI 2.1 and DisplayPort 1.4 cables.
    • Check your computer's display settings to ensure the desired resolution and refresh rate are selected and supported by your monitors.

7. Maintenance

To ensure the longevity and optimal performance of your KVM switch, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the KVM switch. Avoid using liquid cleaners or abrasive materials, as they may damage the device.
  • Storage: Store the KVM switch in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
  • Cable Management: Keep cables organized and untangled to prevent damage and ensure proper airflow around the device.
  • Ventilation: Ensure the KVM switch has adequate ventilation to prevent overheating. Do not block any ventilation openings.

8. Warranty and Support

Your Jasoz Triple HDMI+Displayport KVM Switch comes with a commitment to quality and customer satisfaction.

  • Free Returns: Enjoy free returns within 90 days of purchase. Please refer to the seller's return policy for detailed terms and conditions.
  • Technical Support: For any technical issues, questions, or concerns not covered in this manual, please contact the seller or manufacturer's customer support. Provide your product model and a detailed description of the issue for faster assistance.
  • Security & Privacy: We prioritize your security and privacy. Your personal details are protected and not shared with third parties without your consent.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.