1. Introduction
The SMLDC02 Schumann Resonance Generator is a device designed to produce ultra-low frequency pulse waves, including the natural 7.83Hz Schumann resonance frequency. It aims to create a specific environmental field that may contribute to physical and mental relaxation, improve perception of sound and images, and enhance overall well-being. This generator features a digital circuit crystal oscillator for stable and anti-interference frequency generation, with an adjustable range from 0.01Hz to 100KHz.
2. Specifications
| Feature | Detail |
|---|---|
| Model Number | SMLDC02 |
| Working Voltage | DC 5V (DC 4-15V) |
| Working Current | 8-14mA |
| Power Interface | Type-C (supports Type-C to Type-C power supply) or DC 5.5*2.1 (DC 5V) |
| Default Frequency | 7.83Hz |
| Adjustment Range | 0.01Hz ~ 100KHz Pure Sine Wave |
| Signal Voltage Amplitude | 3V |
| PCB Board Size | 150 x 100 x 12mm |
| Weight | 86g |
| Protection Features | Anti-reverse connection, overvoltage, overcurrent (resettable fuse and TVS double protection) |
| Customization | Yes |
| Origin | Mainland China |
3. Product Overview
The SMLDC02 features a dual-antenna design for Schumann resonant wave transmission and a clear LCD1602 display for frequency and status indication. The front panel includes a numeric keypad for frequency adjustment and control buttons for various functions.

Figure 1: Front Panel Layout and Controls
- Output Signal Indicator Light: Indicates when the signal is active.
- Signal Test Interface: Use an oscilloscope probe to measure the output signal (GND/SIN port).
- Backlight Button: Short press to toggle LCD backlight ON/OFF. Long press to toggle Output Signal Indicator ON/OFF.
- Reset Button (RES): Used for system reset.
- LCD1602 Display: Shows current frequency and status messages.
- TYPE-C 5V Power Interface: Primary power input.
- Frequency Adjustment Keyboard: Numeric keys (0-9), decimal point (.), and OK button for setting frequency.
- SET Button: Short press to re-enter frequency setting mode. Long press to toggle 'Power-off Storage Function' ON/OFF.

Figure 2: Back Panel Power Inputs and Protection
- Schumann Resonant Wave Transmitting Antenna: Dual antenna design.
- Power Supply 1 (DC 5.5*2.1): Alternative DC 5V power input.
- Power Supply 2 (TYPE-C): Primary DC 5V power input. Note: Use only one power supply at a time.
- Resettable Fuse and TVS Double Protection: Ensures device safety.
- Pure Sine Wave Signal Generation: Internal circuitry for signal generation.
- Schumann Wave Signal Test Port: For external signal verification.
4. Setup
- Power Connection: Connect a DC 5V power supply to either the Type-C port or the DC 5.5*2.1 port. Ensure only one power source is connected at a time. A Type-C cable is not included.
- Placement: Place the generator in the desired environment where the Schumann resonance effect is intended.
5. Operating Instructions
- Power On: Once connected to a power source, the device will power on. The default output frequency is 7.83Hz.
- Adjusting Output Frequency:
- Use the numeric keys (0-9) and the decimal point (.) on the keypad to enter the desired frequency value.
- Press the 'OK' button to confirm the input.
- If an incorrect value is entered, press the 'SET' button to clear and re-enter.
- The adjustable frequency range is 0.01Hz to 100KHz.
- Example: To set 7.83Hz, press [7][.][8][3], then press [OK].
- Saving Parameters (Power-off Storage Function):
- By default, parameters are not saved when the device is powered off.
- To enable power-off saving, press and hold the 'SET' button until the LCD displays 'Data Save ON'.
- Controlling LCD Backlight:
- Short press the 'BACKLIGHT' button to turn the LCD backlight ON or OFF.
- Controlling Output Signal Indicator (PWR LED):
- Long press the 'BACKLIGHT' button to turn the output signal indicator (PWR LED) ON or OFF.
- Verifying Output Waveform:
- To verify the output signal, connect an oscilloscope probe to the 'GND/SIN' port. A pure sine wave should be observed.

Figure 3: Output Waveform Verification with Oscilloscope
6. Maintenance
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to open the casing or modify the internal components, as this may void the warranty and cause damage.
- Ensure proper ventilation around the device during operation.
7. Troubleshooting
- Q: LCD does not display correctly after power on?
- A: Briefly press the 'RES' (Reset) button and then power on the device again.
8. User Tips
The SMLDC02 Schumann Resonance Generator can be utilized in various environments to potentially enhance well-being and specific activities:
- Audio-Visual Spaces: May enhance the sound field and overall audio-visual experience.
- Bedrooms: Can be used to help promote relaxation, soothe nerves, and potentially aid in improving sleep quality.
- Offices: May contribute to a more relaxed atmosphere, potentially improving work efficiency and reducing mental stress.
- Creative Spaces: Could help foster creative inspiration.
- Meditation/Spirituality Areas: Useful for creating a calming environment for resting body and mind during practices like tea ceremonies or meditation.
9. Warranty and Support
This product is manufactured with high-quality components and undergoes rigorous testing. For technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty claims.