cada Warrior H2

Contents

Cada Warrior H2 Remote Control Building Block Car

Model: Warrior H2 | Brand: cada

1. Introduction

Welcome to the world of Cada building blocks! This manual provides detailed instructions for assembling, operating, and maintaining your Cada Warrior H2 Remote Control Building Block Car. This 575-piece set allows you to construct a highly detailed AWD SUV that can be controlled via a 2.4G remote control or a dedicated mobile application, offering an engaging and interactive play experience.

Cada Warrior H2 RC car with remote control and mobile app interface

Image 1: The Cada Warrior H2 building block car, showcasing its remote control and mobile app capabilities.

2. Safety Warnings

  • Choking Hazard: This product contains small parts and is not suitable for children under 3 years old. Keep away from fire and ensure children do not swallow any components.
  • California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • Battery Safety: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Always remove batteries if the product is not used for a long period.
  • Adult Supervision: Adult supervision is recommended during assembly and operation, especially for younger users.

3. Package Contents

Please check the package carefully to ensure all components are present:

  • 575 Building Blocks for Cada Warrior H2 model
  • 2.4G Remote Control Unit
  • Power Module (includes battery box and motors)
  • Assembly Instruction Manual
  • USB Charging Cable (for car's lithium battery)
  • Sticker Sheet (for detailing)

Note: Packaging may vary. Some versions may not include the original box.

4. Assembly and Setup

4.1 Building the Car

Follow the detailed, step-by-step instructions provided in the included Assembly Instruction Manual. Ensure all blocks are firmly connected to ensure structural integrity and proper functionality of the car.

4.2 Battery Installation

  • For the Car: Install the rechargeable lithium battery pack into the designated compartment within the power module. Connect it securely. Charge the battery fully before first use using the provided USB cable.
  • For the 2.4G Remote Control: Open the battery compartment on the remote control. Insert the required batteries (e.g., 2x AA or AAA, refer to remote for specific type) ensuring correct polarity (+/-). Close the compartment.

4.3 Mobile App Download and Connection

To use the mobile app control feature:

  1. Download the App: Search for "Kaka SMART+" in your mobile device's app store (compatible with iOS and Android systems) or scan the QR code provided in the assembly manual to download the application.
  2. Connect via Bluetooth:
    • Ensure Bluetooth is enabled on your mobile device.
    • Turn on the power switch of the Cada Warrior H2 car.
    • Open the "Kaka SMART+" app and follow the on-screen instructions to connect to your car via Bluetooth.
Mobile app download instructions for Kaka SMART+

Image 2: Instructions for downloading the Kaka SMART+ app for mobile control.

4.4 2.4G Remote Control Pairing

Turn on the power switch of the Cada Warrior H2 car and then the 2.4G remote control. The remote control should automatically pair with the car. If pairing issues occur, refer to the specific pairing instructions in your assembly manual.

5. Operating Instructions

The Cada Warrior H2 offers two distinct control methods: the included 2.4G remote control and the "Kaka SMART+" mobile application.

5.1 2.4G Remote Control Operation

The 2.4G remote control provides intuitive physical control over the car.

  • Power Switch: Locate the ON/OFF switch on the remote control (Image 3) and slide it to the ON position. An indicator light will illuminate.
  • Movement:
    • Left Joystick: Push forward to move the car forward. Pull back to move the car backward.
    • Right Joystick: Push left to turn the car left. Push right to turn the car right.
Diagram of the 2.4G remote control with labeled buttons

Image 3: Diagram of the 2.4G remote control, showing the indicator light, joysticks for movement, and the power switch.

5.2 Mobile App Control (Kaka SMART+)

Once connected via Bluetooth, the "Kaka SMART+" app offers advanced control and programming options (Image 4).

Kaka SMART+ app interface showing different control modes

Image 4: Overview of the Kaka SMART+ app interface, highlighting the different control modes available.

5.2.1 Rocker Mode

This mode provides virtual joysticks on your screen for manual control, similar to a physical remote (Image 5).

  • Virtual Joysticks: Control forward/backward movement and left/right steering.
  • Speed Slider: Adjust the car's speed.
  • Pre-programmed Actions: Buttons for actions like "Walk 8", "Go straight and make a 3m turn", "Back to the starting point", and "Go twice in a circle".
  • Bluetooth Connection Icon: Indicates connection status.
  • Return Key: Navigates back in the app.
Kaka SMART+ app rocker mode interface with virtual controls

Image 5: The Kaka SMART+ app's rocker mode interface, displaying virtual joysticks, speed control, and various action buttons.

5.2.2 Programming Model

Engage in graphic programming using a drag-and-drop interface to create custom movement sequences for your car (Image 6).

  • Instruction Blocks: Drag and drop blocks to build your program.
  • Control Flow: Includes blocks for "Start Custom loop", "An infinite loop", "Suspended", "Termination of", and "The trigger of".
  • Management: Options to "Save" and "Delete" your programs.
  • Bluetooth Connection Icon: Indicates connection status.
  • Return Key: Navigates back in the app.
Kaka SMART+ app programming interface with drag-and-drop blocks

Image 6: The Kaka SMART+ app's programming interface, demonstrating graphic programming with drag-and-drop instruction blocks.

5.2.3 Gyroscopic Control

Control the car by tilting your mobile phone, utilizing its gravity sensor (Image 7).

  • Tilt to Steer: Tilt your phone to control the car's direction.
  • SUV Operating Range: Visual indicator of the car's movement range.
  • SUV Location: Shows the car's current orientation.
  • Bluetooth Connection Icon: Indicates connection status.
  • Return Key: Navigates back in the app.
Kaka SMART+ app gyroscopic control interface

Image 7: The Kaka SMART+ app's gyroscopic control interface, illustrating phone tilt for car movement.

5.2.4 Path Model

Draw a custom path on your phone screen, and the car will automatically follow it (Image 8).

  • Path Line: Draw your desired route directly on the screen.
  • Travel Switch: Activate this to make the car follow the drawn path.
  • Repeat Along: Option to make the car continuously follow the path.
  • Bluetooth Connection Icon: Indicates connection status.
  • Return Key: Navigates back in the app.
Kaka SMART+ app path model interface for drawing routes

Image 8: The Kaka SMART+ app's path model interface, allowing users to draw and execute custom routes.

5.3 Car Features

  • LED Lights: The car is equipped with functional LED headlights and rear lights for realistic illumination (Image 9).
  • Opening Doors: Both side doors and the rear tailgate can be opened manually, adding to the realistic play experience (Image 10).
  • Chassis Design: Features a solid chassis with a built-in shock absorber system and high-quality tires, providing strong off-road performance and durability (Image 11).
Renderings of the car's LED headlights and rear lights

Image 9: Renderings showing the illuminated LED headlights and rear lights of the Cada Warrior H2.

Cada Warrior H2 car with side doors and tailgate open

Image 10: The Cada Warrior H2 with its side doors and tailgate opened, demonstrating its interactive features.

Underside view of the Cada Warrior H2 chassis

Image 11: A detailed view of the Cada Warrior H2 chassis, highlighting the direction vernier and high-quality tires with a built-in shock absorber system.

6. Maintenance

  • Cleaning: Wipe the building blocks and car components with a soft, dry cloth. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the plastic.
  • Battery Care:
    • Remove batteries from the car and remote control if not in use for extended periods to prevent leakage.
    • Recharge the car's lithium battery as per manufacturer guidelines. Do not overcharge or leave unattended during charging.
    • Dispose of old or depleted batteries responsibly according to local regulations.
  • Storage: Store the car and all components in a cool, dry place, away from direct sunlight, extreme temperatures, and excessive dust.
  • Inspection: Periodically check for any loose or damaged blocks and reassemble or replace them as needed to maintain the car's structural integrity.

7. Troubleshooting

ProblemPossible CauseSolution
Car not responding to remote/appCar or remote is OFF; Low/dead batteries; Bluetooth disconnected; Remote not paired.Ensure car and remote are ON. Replace/charge batteries. Reconnect Bluetooth in app. Re-pair remote control (refer to manual).
Car moves erratically or not straightObstruction in wheels/chassis; Loose blocks; Gyroscopic control needs calibration.Check for and remove obstructions. Ensure all blocks are securely connected. Calibrate gyroscopic control in the app.
LED lights not workingLow battery; Loose wiring connection.Charge car battery. Check wiring connections for the LED lights (if accessible).
App connectivity issuesBluetooth interference; App glitch; Out of range.Restart the app and your mobile device. Ensure car is within Bluetooth range. Check for app updates.

8. Specifications

FeatureDetail
Brandcada
Model NameWarrior H2
Model NumberRC car blocks
Number of Pieces575 Pcs
Block TypeSmall building block (Compatible with Lego)
MaterialABS Plastic
Power SourceLithium Battery (for car)
Control Methods2.4G Remote Control, Mobile APP Bluetooth control (iOS & Android)
Recommended Age6-12Y, 14+y, 18+
OriginMainland China
CertificationCE
Special FeaturesLED lights, opening doors/tailgate, built-in shock absorber system, solid chassis, STEAM programming capability.
DimensionsRefer to product packaging or official Cada website for detailed dimensions.

9. User Tips

  • Assembly Patience: Take your time during assembly. Double-check each step to ensure all blocks are firmly connected. A well-built model will perform better and be more durable.
  • Battery Management: For longer play sessions, ensure the car's battery is fully charged and consider having spare batteries for the remote control.
  • Explore App Features: Don't hesitate to experiment with all the different control modes in the "Kaka SMART+" app, especially the programming model, to unlock creative play possibilities and learn basic coding concepts.
  • Driving Surface: While the car's solid chassis and shock absorber system allow for various terrains, avoid excessively wet or muddy conditions to protect the electronic components.

10. Warranty and Support

For any questions, technical support, or warranty claims regarding your Cada Warrior H2 building block car, please contact the seller or manufacturer directly. Keep your proof of purchase, such as your order number or receipt, as it may be required for support services.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.