NEWBOLER Bicycle Light User Manual

1. Product Overview

The NEWBOLER Bicycle Light (Model LIG015) is a high-performance headlight designed for cycling, offering exceptional brightness and durability. It features a powerful 10000 lumen output, a large 10000 mAh rechargeable battery, and multiple lighting modes to ensure safety and visibility during night rides. Its robust aluminum alloy construction provides IPX5 waterproofing and resistance to wear and impact.

2. Specifications

Model LIG015 (10000 Lumens)

Model LIG013 (3000 Lumens)

Note: Specifications may vary slightly between different production batches or specific model variants (e.g., LIG010, LIG015, LIG013).

3. Package Contents

Upon opening the package, please ensure all the following items are present:

• NEWBOLER Bicycle Light Unit
• Handlebar Mounting Brackets (2 pcs for LIG015, 1 pc for LIG013)
• USB Type-C Charging Cable
• USB Adapter (for power bank function, LIG015 only)
• Spacers/Rubber Pads for bracket (as needed)
• Mounting Screws and Hex Key

4. Setup and Installation

Mounting the Light to Your Bicycle

Follow these steps to securely attach the bicycle light to your handlebar:

1. Step 1: Place the base of the mounting bracket over your bicycle handlebar. Use the provided rubber spacers if necessary to ensure a snug fit and prevent scratching.
2. Step 2: Adjust the position of the base and tighten the base screws using the hex key. Ensure it is firm but do not overtighten.
3. Step 3: For models with double brackets (LIG015), install the second bracket in the same manner, ensuring it is aligned with the first.
4. Step 4: Push the bicycle light unit into place on the installed bracket(s). Tighten the screws on the light unit to fix it securely. Verify that the light does not shift when shaken vigorously.

5. Operating Instructions

Power On/Off and Mode Selection

The bicycle light features a single power button and a digital display for easy operation.

• Power On: Press and hold the power button for a few seconds until the light turns on and the digital display activates.
• Mode Cycle: Short press the power button to cycle through the available lighting modes: Floodlight, Spotlight, High Light, and Flash.
• Power Off: Press and hold the power button again for a few seconds to turn off the light.

Digital Display Function

The integrated digital display provides real-time information:

• Display 1 (Use Time): Shows the estimated remaining operating time for the current lighting mode (e.g., 7h for Floodlight, 4.5-5h for High Light).
• Display 2 (Power%): Indicates the current battery charge level as a percentage (0-100).

Charging the Device

The bicycle light is equipped with a Type-C charging port.

• Connect the provided USB Type-C cable to the light's charging port and to a suitable USB power source (e.g., wall adapter, computer USB port).
• The digital display will show the charging progress (Power%).
• A full charge typically takes approximately 8 hours for the LIG015 model.

Power Bank Function (LIG015 only)

The LIG015 model can be used as a power bank to charge other devices:

• Connect the provided USB adapter to the light's Type-C port.
• Connect your mobile phone or other USB-powered device to the adapter.
• The light will begin charging your device, and the display will show the remaining battery percentage.

6. Maintenance

• Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Water Resistance: The light is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. However, it is not designed for prolonged immersion or heavy downpours. To better protect the battery life, prolonged use in heavy rain is not recommended. Ensure the USB port cover is securely closed when not charging.
• Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery to about 50-70% and recharge every 3-6 months to maintain battery health.
• Battery Care: Avoid fully discharging the battery frequently. Charge the light regularly to prolong battery lifespan.

7. Troubleshooting

• Light not turning on: Ensure the battery is charged. Connect the light to a power source and check if the charging indicator activates.
• Light not holding charge: Ensure the charging cable and power source are working correctly. Avoid extreme temperatures during charging and use.
• Digital display not working: If the light functions but the display is off, try restarting the device. If the issue persists, contact customer support.
• Light flickering or dim: This may indicate a low battery. Recharge the device.
• Bracket feels loose: Re-tighten the mounting screws on the handlebar and the light unit. Ensure appropriate spacers are used for a secure fit.

8. User Tips

• Lumen Output: Be aware that while the LIG015 model is advertised at 10000 lumens, some users report real-world output closer to 2000-3000 lumens. This is common for high-power LED lights, where peak theoretical output may differ from sustained practical output.
• Charging: Use a standard USB charger for optimal battery health. While the device is USB-C, specific fast charging protocols are not detailed, so a standard 5V/2A charger is generally safe and effective.
• Visibility: The light offers a wide 180-degree floodlight angle and an anti-glare design to prevent dazzling oncoming traffic, enhancing safety for both the rider and others.
• Power Bank: The power bank feature (LIG015) is convenient for emergency phone charging on longer rides.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the NEWBOLER Official Store directly through your purchase platform. Keep your order details handy for faster service.

A PDF version of the user manual is available for download: User manual (PDF)