1. Introduction
Thank you for choosing the Hytera AP588 Long Range Radio Communicator. This manual provides essential information for the safe and efficient use of your radio. The AP588 is a high-power, commercial-grade walkie-talkie designed for reliable communication in various environments, including hotels, civil services, water conservancy, ports, electricity, hospitals, shopping malls, and railways. It features a robust design, clear audio, and extended communication range.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x AP588 Radio
- 1 x Antenna (400-470mHz)
- 1 x Battery (BL1507, 1500mAh)
- 1 x CH10A07 Charger Base
- 1 x Desktop Charger (PS1018 for EU, PS1016 for UK, or PS1014 for US plug standard)
- 1 x Belt Clip
- 1 x User Manual (this document)
3. Product Overview
The Hytera AP588 is designed for ease of use and durability. It features a clear display, a numeric keypad, and essential controls for efficient communication.
4. Setup
4.1 Attaching the Antenna
Screw the antenna clockwise into the connector on the top of the radio until it is firmly seated. Do not overtighten.
4.2 Installing the Battery
- Align the battery with the battery compartment on the back of the radio.
- Press the battery firmly into place until it clicks, indicating it is securely locked.
4.3 Charging the Battery
Before initial use, fully charge the battery. The AP588 supports fast charging, reaching 0-100% in approximately 1.8 hours.
- Connect the desktop charger to a power outlet using the appropriate plug standard (EU, UK, or US).
- Place the radio with the battery installed into the charger base (CH10A07).
- The charging indicator on the radio or charger will show the charging status (e.g., red for charging, green for fully charged).
- Alternatively, the radio supports Type-C charging directly. Connect a Type-C cable to the radio's charging port and a compatible power source.
4.4 Attaching the Belt Clip
Align the belt clip with the designated slots on the back of the radio and slide it down until it locks into place.
5. Operating Instructions
5.1 Power On/Off
Rotate the Power/Volume knob clockwise to turn the radio on. Rotate it counter-clockwise until a click is heard to turn the radio off.
5.2 Adjusting Volume
Rotate the Power/Volume knob to adjust the listening volume.
5.3 Selecting a Channel
Use the Channel Selector knob or the keypad to select one of the 128 available channels. The display will show the current channel information.
5.4 Transmitting and Receiving
- To transmit, press and hold the Push-to-Talk (PTT) button on the side of the radio. Speak clearly into the microphone.
- Release the PTT button to receive.
5.5 Key Features
- Auto Scan & Vote Scan: Automatically scans for active channels or selects the strongest signal.
- Priority Channel Hunt: Monitors a designated priority channel while scanning other channels.
- Squelch: Eliminates background noise when no signal is present.
- H/L Power Switching: Allows switching between high and low transmit power to conserve battery or extend range.
- Voice Announcement: Provides audible feedback for channel changes or other functions.
- CTCSS/CDCSS: Continuous Tone-Coded Squelch System / Continuous Digital-Coded Squelch System for filtering unwanted calls.
- Talk Around: Enables direct radio-to-radio communication, bypassing repeaters.
- Timeout Timer: Limits transmission duration to prevent accidental long transmissions.
- Bluetooth (Optional): For wireless audio accessories.
6. Maintenance
6.1 General Care
- Keep the radio dry. If it gets wet, wipe it immediately.
- Do not expose the radio to extreme temperatures.
- Avoid dropping or subjecting the radio to severe impacts.
- Clean the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or solvents.
6.2 Battery Care
- Charge the battery only with the specified Hytera charger.
- Do not short-circuit the battery terminals.
- Do not dispose of batteries in fire.
- If the radio will not be used for an extended period, remove the battery.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Battery is low or not installed correctly. | Charge the battery or re-install it securely. |
| Cannot transmit or receive | Incorrect channel selected; out of range; antenna not attached. | Verify channel; move closer to other radios; ensure antenna is secure. |
| Poor audio quality | Volume too low/high; squelch level too high; interference. | Adjust volume; check squelch settings; move away from sources of interference. |
| Battery drains quickly | High transmit power used frequently; battery nearing end of life. | Use low power when possible; consider replacing battery if old. |
8. Specifications
| Feature | Specification |
|---|---|
| Model | AP588 (also compatible with AP580/AP582/AP585/AP586) |
| Brand Name | Hytera |
| Frequency Range | 400-470MHz (UHF) |
| Output Power | 3W-5W |
| Battery Capacity | 1500mAh (BL1507) |
| Battery Life (5/5/90 Duty Cycle, High TX Power) | 16 hours |
| Waterproof / Water-Resistant | IP55 |
| Durability Standard | MIL-STD-810 G |
| Material | Plastic |
| Storage Channels | 128 |
| Channel Spacing | 12.5kHz/20kHz/25kHz |
| Dimensions (with antenna & battery) | 115 x 55 x 29.5 mm |
| Weight (with antenna & battery) | 230g |
| Maximum Range | 5km-10km (environment dependent) |
| Display | Yes |
| Charging Port | Type-C |
| Certifications | CE, FCC, RoHS |
9. User Tips
- Frequency Range: The AP588 model specified here operates in the UHF band (400-470MHz). If you require VHF capabilities, please ensure you purchase the correct model variant, as this specific model is UHF only.
- Range Optimization: For maximum range, ensure your antenna is securely attached and you have a clear line of sight. Obstacles like buildings and dense foliage can significantly reduce communication distance.
- Battery Life: To extend battery life, utilize the low power setting when communicating over short distances.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Hytera website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
