SUITU ST-5007

Contents

SUITU ST-5007 120W Handheld Air Compressor

Model: ST-5007

Instruction Manual

1. Introduction

Thank you for choosing the SUITU ST-5007 120W Handheld Air Compressor. This portable and versatile inflator is designed for quick and efficient inflation of various items, including car tires, bicycle tires, motorcycle tires, electric vehicle tires, and sports balls. Featuring a digital display and preset tire pressure function, it ensures accurate and safe inflation. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Safety Information

  • Always operate the air compressor in a well-ventilated area.
  • Do not leave the compressor unattended while in operation.
  • Keep out of reach of children.
  • Avoid prolonged continuous operation to prevent overheating. Allow the device to cool down between uses if necessary.
  • Ensure the correct pressure setting for the item being inflated to prevent over-inflation and potential damage or injury.
  • Do not expose the device to rain or moisture.
  • If the device is wired, ensure the vehicle's engine is running when using it to avoid draining the car battery.

3. Package Contents

Please check the package for the following items:

  • SUITU ST-5007 Handheld Air Compressor (Wireless or Wired version)
  • Inflatable tube (approx. 35cm / 13.77in)
  • Various air nozzles (e.g., for balls, bicycles)
  • (For Wired version) Car cigarette lighter power cable
  • (For Wireless version) USB charging cable
  • User Manual

4. Product Overview

The SUITU ST-5007 features a compact design for easy portability and storage. Key components include:

  • Digital Display: Shows current and preset pressure values.
  • Control Buttons: For adjusting inflation mode and pressure settings.
  • Inflation Port: Where the inflatable tube connects.
  • Power Button/Trigger: Activates the compressor.
  • Emergency Lighting: Integrated light for visibility in low-light conditions.
SUITU ST-5007 Handheld Air Compressor
Figure 1: SUITU ST-5007 Handheld Air Compressor main unit.
Digital display and control buttons
Figure 2: Close-up of the digital display and control buttons. 'R' button adjusts inflation mode, '+' and '-' buttons adjust tire pressure.
Wired version of the air compressor with accessories
Figure 3: Wired version (Type B) of the air compressor, showing the cigarette lighter plug and included air nozzles. This model features instant air replenishment, emergency lighting, intelligent noise reduction, and a metal cylinder block.

5. Specifications

Feature Specification
Model Name ST-5007
Type Electric Air Pump
Power 120W
Inflatable Tube Length Approx. 35cm (13.77in)
Dimensions (L x H x W) 13.5cm x 21.5cm x 7cm (5.31in x 8.46in x 2.75in)
Weight Approx. 0.544 kg
Power Source (Wired) Car Cigarette Lighter
Power Source (Wireless) Rechargeable Battery (USB charging)
Features Digital Display, Preset Tire Pressure, Automatic Stop, Emergency Lighting, Intelligent Noise Reduction, Metal Cylinder Block
Origin Mainland China
Dimensions of the air compressor
Figure 4: Product dimensions and inflatable tube length.

6. Setup

6.1 Charging (Wireless Version Only)

  1. Connect the provided USB charging cable to the charging port on the air compressor.
  2. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port.
  3. The digital display or an indicator light will show the charging status. Charge until the battery is full.

6.2 Connecting the Inflatable Tube

  1. Screw the inflatable tube securely onto the inflation port of the air compressor.
  2. Select the appropriate air nozzle for the item you wish to inflate and attach it to the other end of the inflatable tube.

7. Operating Instructions

7.1 Powering On

  • Wireless Version: Press and hold the power button (trigger) for a few seconds until the digital display illuminates.
  • Wired Version: Plug the car cigarette lighter cable into your vehicle's 12V outlet. It is recommended to start your vehicle's engine before use. The digital display should illuminate.

7.2 Setting Desired Pressure

  1. Press the 'R' button to cycle through different inflation modes (e.g., Car, Motorcycle, Bicycle, Ball). Each mode may have a default pressure setting.
  2. Use the '+' and '-' buttons to adjust the desired tire pressure. The digital display will show the target pressure.
  3. The unit supports various pressure units (e.g., PSI, BAR, KPA, kg/cm²). Refer to your item's recommended pressure. For example, for a car tire requiring 2.5 BAR, set the display to 2.5 in BAR mode.

7.3 Inflating

  1. Connect the air nozzle to the valve stem of the item you wish to inflate. Ensure a tight seal to prevent air leakage.
  2. The digital display will show the current pressure of the item.
  3. Press the power button (trigger) to start inflation. The compressor will automatically stop once the preset pressure is reached.
  4. After inflation, quickly disconnect the air nozzle from the valve stem.
Air compressor inflating a tire
Figure 5: The air compressor in action, inflating a tire with the digital display showing real-time pressure.
Air compressor inflating various items
Figure 6: The SUITU ST-5007 is suitable for inflating tires on cars, motorcycles, bicycles, electric vehicles, and various sports balls.

8. Maintenance

  • Cleaning: Wipe the exterior of the compressor with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the air compressor in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Battery (Wireless Version): For optimal battery life, charge the device regularly, even if not in frequent use. Avoid completely draining the battery.
  • Tube and Nozzles: Ensure the inflatable tube and nozzles are clean and free from debris before and after each use.

9. Troubleshooting

Problem Possible Cause Solution
Compressor does not turn on. Low battery (wireless) / No power from car outlet (wired) / Loose connection. Charge the battery (wireless) / Check car outlet and ensure engine is running (wired) / Ensure all connections are secure.
Compressor runs but no air inflates. Inflatable tube or nozzle not properly connected / Valve stem blocked / Leak in tube/nozzle. Check and secure all connections / Clear any obstructions in the valve stem / Inspect tube and nozzles for damage.
Compressor stops prematurely. Preset pressure reached / Overheating protection activated. Check preset pressure setting / Allow device to cool down before resuming use.
Inaccurate pressure reading. Loose connection to valve stem / Incorrect pressure unit selected. Ensure a tight seal on the valve stem / Verify the correct pressure unit (PSI, BAR, etc.) is selected.

10. User Tips

  • Verify Model Type: Before purchasing or using, confirm if you have the wireless (USB rechargeable) or wired (car cigarette lighter powered) version to ensure correct power supply and charging methods.
  • Engine On for Wired Models: When using the wired version, always keep your car's engine running to prevent draining the vehicle's battery.
  • Pressure Units: Familiarize yourself with the different pressure units (PSI, BAR, KPA, kg/cm²) and select the one appropriate for your inflation needs. Most vehicle tires specify pressure in PSI or BAR.
  • Check Tire Pressure Regularly: Use the digital display to quickly check current tire pressure before inflating to avoid over-inflation.

11. Frequently Asked Questions (FAQ)

Q: Can this air compressor be used wirelessly?
A: Yes, there is a wireless version available that operates on a rechargeable battery. Please ensure you have selected the correct model. The wired version requires connection to a car cigarette lighter.
Q: How do I recharge the wireless model?
A: The wireless model typically recharges via a USB cable. Connect it to a standard USB power source.
Q: Can I inflate bicycle tires with this pump?
A: Yes, the SUITU ST-5007 comes with various air nozzles, including those suitable for bicycle tires.
Q: What is the maximum pressure this device can handle?
A: The maximum pressure capacity will be displayed on the digital screen and can be set according to your needs. Always refer to the recommended pressure for the item you are inflating.

12. Warranty and Support

This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact the seller or refer to the warranty card included with your purchase. Keep your proof of purchase for warranty validation.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.