1. Introduction
The GODIAG GT109 DOIP-ENET Diagnostic Programming Cable is a specialized tool designed for advanced vehicle diagnostics, programming, and coding. It supports the DOIP (Diagnostics Over Internet Protocol) communication standard, making it compatible with a wide range of modern vehicles from manufacturers such as BMW, Mercedes-Benz, Volkswagen, Audi, Land Rover, Volvo, and Geely. A key feature of the GT109 is its integrated voltage display, which provides real-time monitoring of the vehicle's battery voltage and includes a low voltage alarm to prevent potential damage during critical operations.
2. Key Features
- DOIP-ENET Communication: Fully supports DOIP-ENET communication protocols for high-speed data transfer.
- Extensive Vehicle Compatibility: Capable of diagnostic programming and coding for BMW, Mercedes-Benz, Volkswagen, Audi, Land Rover, Volvo, and Geely vehicles that support the DOIP protocol.
- Integrated Voltage Display: Features a real-time voltage display for convenient monitoring of the vehicle's power supply.
- Low Voltage Alarm: Alerts the user if the vehicle voltage drops below approximately 11V/11.5V, preventing potential damage to the vehicle's battery or programming modules during operations.
- High-Quality Construction: Made with best quality materials for durability and reliable performance.
- One-Year Warranty: Comes with a one-year warranty for peace of mind.
3. Vehicle & Software Compatibility
The GODIAG GT109 DOIP-ENET cable is designed to work with various diagnostic and programming software. Please note that software is NOT provided with this cable and must be acquired separately.
3.1 Supported Vehicle Brands & Platforms
- BMW:
- Series 1 (2004+), 2 Series, M2 (2013+), 2 Series ActiveTourer (2014+), 2 Series GranTourer (2015+)
- 3 Series, M3 (2005+), 4 Series, M4 (2013+), 5 Series, M5 (2003+), 6 Series, M6 (2003+), 7 Series (2008+), 8 Series (2018+)
- X1 (2009+), X2 (2018+), X3, X3M (2010+), X4, X4M (2014+), X5, X5M (2006+), X6, X6M (2008+), X7 (2019+)
- Z4 (2009+), I3 (2013+), I8 (2013+), MINI (2006+), Toyota Supra (2019+)
- Volkswagen Audi Group (VAG) - MLBEVO Platform:
- A4LB9, Q5L, A6C8, Newest A7, SAIC A7, A8D5, Q7, 2021 A3L, A5, A8 E-Tron, Q5etron, Q4, VW ID3, ID4, ID5
- Volkswagen Audi Group (VAG) - MQBEVO Platform:
- Golf 8 (2020-2022), TALAGON (2021-2022), A3L (2020-2022), Teramont (2021-2022), Teramont X (2021-2022), Octavia PRO (2021-2022), New Bentley, Lamborghini, etc.
- Almost all Audi models after 2022 are supported.
- Mercedes-Benz:
- DOIP-ENET Protocol Diagnostic Programming for 2023 new cars such as 223, 206, 213, 205, etc. (Note: Xentry software may require configuration files and patches).
- Land Rover (2018 and newer):
- Discovery, Range Rover, Range Rover Sport, Range Rover Velar, Jaguar I-Pace (2019).
- Volvo:
- XC90 (2016+), V90 (2017+), S90 (2017+), XC40 (2018+), XC60 (2018+), S60 (2019+), V60 (2019+).
3.2 Compatible Software
The GT109 cable can work with many ENET software applications available in the market. Examples include:
- E-SYS, INPA, ISTA, ISIS, ICOM, ECOM, Rheingold, ODIS-E, Pathfinder, Xentry.
- For BMW, it is compatible with Bimmercode, Bootmod3, Bimmerlink OBD, and other similar apps.
3.3 Mobile Device Compatibility
For mobile phone or tablet use (primarily for BMW software), the GT109 supports Android and iOS devices with USB Type-C connectors, including many Samsung models, iPhone 15, and newer iPads. An OTG converter (USB Type-C to Ethernet adapter) is required and is not included in the default package.
4. Setup Instructions
4.1 Unpacking
Carefully unpack the GODIAG GT109 DOIP-ENET Diagnostic Programming Cable. Ensure all components are present and undamaged.
4.2 Software Acquisition (Crucial Note)
The GODIAG GT109 cable is a hardware interface. Diagnostic and programming software is NOT included and must be purchased or acquired separately. Users are expected to have their own compatible software and knowledge of its operation.
4.3 Connecting to a Computer

- Acquire Software: Purchase and install your preferred computer-based diagnostic software (e.g., ODIS-E, Xentry, E-SYS, ISTA, BMWAIcoder).
- Connect to Vehicle: Plug the OBD-II connector of the GT109 cable into your vehicle's OBD-II port (typically located under the dashboard).
- Connect to Computer: Plug the Ethernet connector of the GT109 cable into the Ethernet port of your laptop or computer.
4.4 Connecting to a Phone or Tablet

- Acquire Mobile Software & Adapter: Purchase and install your preferred mobile diagnostic software (e.g., Bimmercode) and obtain a USB Type-C to Ethernet adapter.
- Connect to Vehicle: Plug the OBD-II connector of the GT109 cable into your vehicle's OBD-II port.
- Connect Cable to Adapter: Plug the Ethernet connector of the GT109 cable into the Ethernet port of your USB Type-C to Ethernet adapter.
- Connect Adapter to Mobile Device: Plug the USB Type-C end of the adapter into your phone or tablet.
- Grant Permissions: Follow any on-screen prompts on your mobile device to grant necessary permissions for the diagnostic application to access the adapter.
5. Operating Instructions
5.1 General Use
Once the GT109 cable is correctly connected to your vehicle and computer/mobile device, and your diagnostic software is running, follow the instructions provided by your specific software application to perform diagnostic, programming, or coding tasks. The GT109 acts as the communication interface between your device and the vehicle's electronic control units (ECUs).
5.2 Voltage Monitoring
The GT109 features an integrated digital display that shows the real-time voltage of your vehicle's battery. This is crucial for monitoring power stability during sensitive operations like programming.
5.3 Low Voltage Alarm
If the vehicle's voltage drops below approximately 11V or 11.5V (depending on the specific threshold), the GT109 will sound an alarm. This indicates that the voltage is too low for safe operation. In such a scenario, do NOT attempt to start the vehicle or perform any diagnostic/programming tasks, as this could lead to battery damage or corruption of vehicle modules. Address the low voltage issue (e.g., charge the battery) before proceeding.
6. Maintenance
- Cleaning: Keep the cable and connectors clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
- Storage: Store the GT109 in a cool, dry place away from direct sunlight and extreme temperatures. Avoid bending or kinking the cable excessively to prevent internal wire damage.
- Handling: Always handle the cable by the connectors, not by the cable itself, when plugging or unplugging to avoid strain on the connections.
7. Troubleshooting
- No Power/Display on GT109:
- Ensure the OBD-II connector is fully seated in the vehicle's port.
- Verify the vehicle's ignition is on (some vehicles require this for OBD-II power).
- Check the vehicle's battery for sufficient charge.
- Low Voltage Alarm Sounds:
- The alarm indicates vehicle voltage is below the safe threshold (~11V/11.5V).
- DO NOT proceed with diagnostics or programming.
- Charge the vehicle's battery or connect a stable external power supply before continuing.
- Connection Issues with Software:
- Verify all physical connections (OBD-II, Ethernet, USB-C adapter if applicable) are secure.
- Ensure your diagnostic software is correctly installed, configured, and compatible with your operating system and vehicle.
- Check for any necessary drivers for the GT109 (though typically plug-and-play for Ethernet).
- If using a mobile device, confirm that the USB Type-C to Ethernet adapter is functioning correctly and permissions are granted.
- Software Not Working/Missing Features:
- Remember that diagnostic software is separate and not included. Ensure you have the correct, licensed software for your intended tasks.
- Consult the documentation for your specific diagnostic software for usage and feature details.
8. Specifications
| Attribute | Specification |
|---|---|
| Model | GT109 DOIP-ENET Diagnostic Programming Cable |
| Brand | GODIAG |
| Hardware Version | DOIP-ENET Cable |
| Software Version | GT109 DOIP-ENET Diagnostic Programming Cable (Product Name) |
| Function | Diagnostic programming and coding for BMW/BENZ/VAG and other DOIP-compatible vehicles |
| Feature | With voltage display |
| Material | Best Quality |
| Item Weight | 0.2kg |
| Item Height | 12cm |
| Item Width | 12cm |
| Item Length | 12cm |
| External Testing Certification | CE |
| Is Batteries Included | No |
| Wireless Support | No |
| Electronic | No |
| High-concerned chemical | None |
| Use | Not Telecommunication |
| Power (W) | - |
9. User Tips
- Newer Audi Models: The GT109 is compatible with newer Audi models (e.g., 2022) for diagnostic and programming tasks, provided they support the DOIP protocol.
- Software Proficiency: Always ensure you have the correct diagnostic software and a thorough understanding of its operation before connecting the cable to your vehicle. This will help prevent potential issues during complex procedures like programming.
- Mercedes-Benz Xentry: For Mercedes-Benz vehicles using Xentry software, specific configuration files and patches might be required for full functionality.
10. Warranty and Support
10.1 Warranty
The GODIAG GT109 DOIP-ENET Diagnostic Programming Cable comes with a One-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
10.2 Technical Support
For technical assistance, troubleshooting, or any product-related inquiries, please contact the GODIAG Official Store where you purchased the product. They can provide specialized support for your device.
10.3 Additional Resources
A detailed user manual in PDF format is available for download, providing more in-depth information and instructions: