1. Introduction
This manual provides detailed instructions for the installation and operation of the Raise Car Cable Wire Canbus Box Adapter (Model: G-RZ-OP64). This adapter is designed to facilitate the installation of an aftermarket Android stereo system in specific Opel vehicle models, ensuring proper communication between the new head unit and the vehicle's existing systems, while retaining certain original functionalities.
The Canbus adapter is specifically designed for Android hosts mounted on the upper part of the car's center console, allowing the original multimedia device to be kept.
2. Vehicle Compatibility
This Canbus Box Adapter is compatible with the following Opel vehicle models and years:
- Opel Corsa D: 2006-2014
- Opel Astra H: 2006-2010
- Opel Zafira: 2006-2010
- Opel Astra: 2004-2010
- Opel Antara: 2008-2013
Important: This Canbus is only suitable for Android hosts mounted on the upper part of the car's center console.
3. Package Contents
Your package should contain the following items:
- Main Wiring Harness
- Canbus Decoder Box (Model: G-RZ-OP64)
- Various Connectors and Adapters
4. Installation Guide
Warning: Installation should ideally be performed by a qualified professional. Disconnect the vehicle's battery before beginning installation to prevent electrical damage or injury.
Preparation
- Ensure your vehicle is compatible (refer to Section 2).
- Gather necessary tools (e.g., trim removal tools, screwdrivers, wire strippers/crimpers if custom connections are needed).
- Disconnect the negative terminal of your vehicle's battery.
- Carefully remove the original car stereo and surrounding trim to access the factory wiring harness.
Connecting the Canbus Decoder Box
Locate the Canbus Decoder Box (P/N: G-RZ-OP64). This box is essential for translating vehicle data for your new Android head unit.
Figure 4.1: Raise CAN BUS DECODER (Model: G-RZ-OP64). Connect the main wiring harness to the Canbus Decoder Box. Ensure a secure connection.
Wiring Harness Connection
The provided harness is designed for a plug-and-play installation with your vehicle's factory harness and the aftermarket stereo.
Figure 4.2: Main wiring harness with various connectors. - Connect the vehicle-specific end of the harness to your car's factory wiring. These connectors are typically keyed to prevent incorrect insertion.
- Connect the aftermarket stereo end of the harness to your new Android head unit.
- Ensure all connections are firm and properly seated. The harness uses standard color-coded wires for consistent and simplified installation.
Refer to the following images for examples of connectors:
Connector Type A 
Connector Type B 
Connector Type C 
Connector Type D 
Connector Type E 
Connector Type F 
Connector Type G Testing and Reassembly
- Before fully reassembling the dashboard, reconnect the vehicle's battery.
- Turn on the ignition and test the new Android head unit. Verify that all functions, including audio, steering wheel controls (if applicable), and display information, are working correctly.
- If everything functions as expected, carefully reassemble the dashboard trim and secure the head unit.
5. Operation
The Canbus Box Adapter works in the background to ensure seamless communication between your vehicle and the aftermarket Android head unit. Once installed, its operation is largely automatic.
- Steering Wheel Controls: The Canbus adapter typically enables the retention of original steering wheel control functionality with your new Android head unit. Configuration may be required within the Android head unit's settings.
- Vehicle Information Display: Depending on the specific Android head unit and vehicle model, some vehicle information (e.g., climate control status, door open warnings) may be displayed on the new screen.
- Original Multimedia Device: The adapter is designed to allow you to keep the original multimedia device, implying it integrates without requiring its removal.
6. Maintenance
The Canbus Box Adapter is a low-maintenance component. No regular user maintenance is required.
- Cleaning: Keep the area around the installed components clean and free from dust and debris.
- Connections: If you experience intermittent issues, ensure all connections remain secure. Avoid pulling on wires.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| New head unit does not power on. | Loose power connection, blown fuse, incorrect wiring. | Check all power connections. Verify vehicle fuses. Ensure the harness is correctly connected to both the vehicle and the head unit. |
| Steering wheel controls do not work. | Canbus not recognized, incorrect head unit settings. | Ensure the Canbus decoder box is properly connected. Check the settings within your Android head unit for steering wheel control configuration. Some head units require manual mapping. |
| No sound from speakers. | Speaker wires disconnected, amplifier issue, head unit settings. | Verify speaker wire connections. Check head unit audio settings. If your vehicle has a factory amplifier, ensure the Canbus adapter is correctly activating it. |
| Original display information not transferring to new Android display. | Limited Canbus functionality, head unit incompatibility. | The Canbus adapter primarily enables basic communication and steering wheel controls. Not all original display information is guaranteed to transfer to an aftermarket Android unit. Verify your Android head unit's capabilities and settings. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Cables, Adapters & Sockets |
| Brand | Raise |
| Model | G-RZ-OP64 |
| Voltage | 12 V |
| Origin | Mainland China |
| Compatibility | Opel Corsa D (06-14), Astra H (06-10), Zafira (06-10), Astra (04-10), Antara (08-13) |
| Function | Connects aftermarket stereo to factory harness, retains Canbus functions (e.g., steering wheel controls). |
9. User Tips
- Double-Check Compatibility: Always verify your specific vehicle model and year against the compatibility list before purchasing and installing.
- Professional Installation Recommended: While designed for ease of use, car electronics installation can be complex. If you are unsure, seek professional assistance.
- Android Head Unit Placement: Remember this Canbus is specifically for Android head units mounted in the upper part of the car's center console.
- Original Display Data: Be aware that not all data from the original Opel display may be transferred or fully displayed on the new Android unit. The primary function is to enable the new unit's operation and retain essential controls.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's terms and conditions or contact the point of purchase. Keep your purchase receipt as proof of purchase.
