1. Introduction
The Godox TT685II is an advanced TTL HSS (High-Speed Sync) camera flash speedlite designed to provide versatile and powerful lighting solutions for photographers. This upgraded model builds upon the robust features of its predecessor, the TT685, offering enhanced functionality and user experience. It is compatible with a wide range of camera systems, including Canon, Nikon, Sony, Fuji, Olympus, and Panasonic.
This manual provides detailed instructions on how to set up, operate, and maintain your TT685II flash to achieve optimal performance and creative lighting effects.
2. What's in the Box
Please check that all the following items are included in your package:
- Flash Unit (TT685II) x1
- Protection Case x1
- Mini Stand x1
- Instruction Manual x1
3. Key Features
- Broader Bounce Angle: The flash head offers an upgraded tilt angle from -7° to 120° and is rotatable in 330°, providing more flexible bounce flash angles for efficient lighting setups.
- TCM Instant Conversion: Features a TCM (TTL Converted to Manual) function for instant conversion from TTL to manual mode, helping to lock in proper exposure values.
- Quick-release Lock: Designed with a quick-release lock for secure and smooth attachment to your camera's hot shoe.
- Transmitter & Receiver Flash: Integrates both transmitter and receiver functions, allowing flexible co-working with other Godox flashes and triggers (e.g., X1, X2, XPro, V1, AD200Pro, AD300Pro).
- Godox 2.4G Wireless X System: Built-in wireless system for seamless connectivity with compatible flashes or flash triggers, offering a range of up to 100 meters.
- External Power Port: A dedicated power port allows connection to an external Lithium-ion power pack (e.g., Godox PB960, sold separately) for increased flash performance and extended shooting sessions.
- Wide Light Coverage: Combines extreme power with maximum zoom flexibility, featuring a guide number of approximately 60 (m ISO100) and a zoom range of 20-200mm.
- USB Update Port: Equipped with a Type-C updating port and a 2.5mm sync cord jack for convenient firmware updates and wired synchronization.
- Multiple Flash Modes: Supports TTL, Manual, and Multi flash modes for unlimited creative control. Includes HSS (up to 1/8000s), FEC, FEB, and rear-curtain sync.
4. Setup
4.1 Battery Installation
- Open the battery compartment cover located on the side of the flash unit.
- Insert four AA batteries (Ni-MH rechargeable batteries are recommended for optimal performance and recycle time, or LR6 alkaline batteries) according to the polarity indicators inside the compartment.
- Close the battery compartment cover securely.
4.2 Mounting to Camera
- Slide the TT685II's hot shoe onto your camera's hot shoe.
- Push the flash forward until it clicks into place, engaging the quick-release lock.
- To remove, press the quick-release button and slide the flash backward.
4.3 Connecting External Power Pack (Optional)
For faster recycle times and extended shooting, you can connect an external power pack (e.g., Godox PB960).
- Locate the external power port on the side of the TT685II.
- Connect the cable from the external power pack to this port.
- Ensure the power pack is charged and turned on.
4.4 Initial Power On
Press the power button to turn on the flash. The LCD screen will illuminate, displaying the current settings.
5. Operating Instructions
5.1 Flash Modes
The TT685II supports three main flash modes: TTL, Manual (M), and Multi (Stroboscopic).
- TTL Autoflash Mode: The flash automatically fires with the correct exposure. Press the MODE button to cycle through modes until 'TTL' is displayed.
- Manual Flash Mode (M): Allows you to manually set the flash output from 1/1 (full power) to 1/128 in 22 steps. Use the dial to adjust power.
- Multi Flash Mode: Fires a series of rapid flashes. Set the frequency (Hz), number of flashes, and flash output.
5.2 Adjusting Bounce Angle
The flash head can be tilted and rotated to bounce light off surfaces for softer illumination.
- Vertical Tilt: Adjust from -7° to 120°.
- Horizontal Rotation: Rotate up to 330°.
Simply twist the light head to your desired position.
5.3 TCM Instant Conversion
To convert a TTL exposure value to a manual power setting:
- In TTL mode, take a test shot.
- Press the TCM button. The flash will convert the TTL exposure to a corresponding manual power output, which you can then fine-tune.
5.4 High-Speed Sync (HSS)
HSS allows you to use the flash at shutter speeds faster than your camera's native flash sync speed (e.g., up to 1/8000s), enabling wider apertures in bright conditions.
- Activate HSS through your camera's flash settings or the flash unit's menu, if available.
5.5 Wireless X System Operation
The TT685II can function as a master (transmitter) or slave (receiver) unit within the Godox 2.4G Wireless X System.
- Setting as Transmitter/Receiver: Use the flash's menu to select 'Transmitter', 'Receiver', or 'Off' for the wireless function.
- Groups and Channels: Set the same group (A, B, C, D) and channel (1-32) on all flashes and triggers you wish to synchronize.
- ID Setting: For advanced control and to avoid interference, set a unique ID (01-99) for your flash system.
6. Maintenance
6.1 Cleaning
- Use a soft, dry cloth to clean the flash unit.
- For stubborn dirt, use a slightly damp cloth with a mild detergent, then wipe dry.
- Avoid using strong solvents or abrasive cleaners.
- Keep the flash tube and sensor clean for optimal performance.
6.2 Battery Care
- Remove batteries when the flash is not in use for extended periods to prevent leakage.
- Use high-quality Ni-MH rechargeable batteries for best results.
6.3 Firmware Updates
Godox periodically releases firmware updates to improve performance and add new features. You can update the firmware via the Type-C USB port.
- Visit the official Godox website to check for the latest firmware for your TT685II model.
- Download the firmware and follow the instructions provided on the website for the update process.
- Connect the flash to your computer using a Type-C USB cable.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flash does not fire. | Low battery, incorrect mode, flash not securely mounted, camera flash settings. | Check/replace batteries. Ensure flash is in correct mode (TTL/M). Re-mount flash securely. Check camera's flash settings. |
| Flash exposure is incorrect. | Incorrect FEC/FEB settings, distance to subject, ambient light. | Adjust FEC/FEB. Ensure subject is within flash range. Use TCM to convert TTL to manual for precise control. |
| Wireless trigger not working. | Incorrect group/channel/ID, distance, interference. | Verify all units (flash, trigger) are on the same group, channel, and ID. Reduce distance between units. Check for other 2.4G devices causing interference. |
| Slow recycle time. | Low battery, high power output. | Replace batteries or use a fully charged external power pack. Reduce flash power output. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | TT685II |
| Compatible Camera Brands | Canon, Nikon, Sony, Fuji, Olympus, Panasonic |
| Flash Coverage | 20-200mm (Auto zoom, Manual zoom) |
| Guide No. (1/1 output, 200mm) | GN ≈ 60 (m ISO100) |
| Flash Duration | 1/300s - 1/20000s |
| Exposure Control System | E-TTL II autoflash and manual flash |
| Multi Flash | Provided (up to 100 times, 199Hz) |
| FE Lock | With <FEL> button or <*> button |
| Sync Mode | High-speed sync (up to 1/8000s), first-curtain sync, second-curtain sync |
| Flash Exposure Compensation (FEC) | Manual. FEB: ± 3 stops in 1/3 stop increments (Manual FEC and FEB can be combined.) |
| Power Supply | Ni-MH battery (recommended) or LR6 alkaline battery*4 |
| Full Power Flashes | Approx. 330 times |
| Recycle Time | 0.1 - 2.6s (Rechargeable Ni-MH Battery) |
| Power Saving | Auto power off after approx. 90 seconds of idle operation (60 minutes if set as Receiver) |
| Sync Triggering Mode | Hotshoe, 2.5mm sync line |
| Dimensions (W x H x D) | 64 x 76 x 190 mm |
| Weight without battery | 405g |
| Weight with battery | 489g |
| 2.4G Wireless Frequency Range | 2413.0MHz - 2465.0MHz |
| Max. Transmitting Power | 5dbm |
| Wireless Flash Function | Transmitter, Receiver, Off |
| Transmitter Groups | A, B, C, D |
| Channels | 32 (1~32) |
| ID | 01-99 |
| Modelling Flash | Fired with camera's depth-of-field preview button |
| Controllable Receiver Groups | A, B, C, D, E (E group can be controlled by X series flash trigger) |
| Auto Focus Assist Beam Effective Range (approx.) | Center: 0.6 ~ 10m / 2.0 ~ 32.8 feet; Periphery: 0.6 ~ 5m / 2.0 ~ 16.4 feet |
| Certification | CE |
9. User Tips
- Camera Compatibility: Always verify the specific TT685II model (e.g., TT685II-C for Canon, TT685II-N for Nikon, TT685II-S for Sony, TT685IIF for Fuji, TT685IIO for Olympus/Panasonic) matches your camera brand for full TTL and HSS functionality. While the TT685II is compatible with many cameras, including newer models like the Canon R50, it's good practice to confirm.
- Battery Choice: For professional use and faster recycling, invest in good quality Ni-MH rechargeable batteries.
- Off-Camera Flash: Experiment with the flash off-camera using the built-in Wireless X System and a compatible trigger (like the Godox XPro or X2T) to create more dynamic and controlled lighting.
- Bounce Flash: Utilize the broad bounce angle of the flash head by aiming it at ceilings or walls to soften harsh shadows and create more natural-looking light.
10. Warranty and Support
Godox products are manufactured to high-quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Godox website. Keep your proof of purchase for any warranty claims.
For further assistance, please contact Godox customer service or your local distributor.