Introduction
The ABKO K561 is a versatile mechanical keyboard designed for both wired and wireless use. It features Bluetooth 5.0 connectivity, hot-swappable switches for easy customization, durable PBT keycaps, and vibrant RGB backlighting. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your K561 keyboard.
Setup
1. Wired Connection
- Locate the USB-C port on the keyboard and the USB-A port on your computer.
- Connect the provided USB-C to USB-A cable to both the keyboard and your computer.
- The keyboard will be automatically recognized by your operating system and is ready for use.
2. Wireless Bluetooth Connection
The K561 supports Bluetooth 5.0 and can pair with up to three different devices.
- Ensure the keyboard is charged or connected via USB-C for initial setup.
- Switch the keyboard to wireless mode (if there's a physical switch, otherwise it defaults to wireless when unplugged).
- To enter pairing mode for a specific profile (Q, W, or E):
- Press and hold Fn + Q for Device 1.
- Press and hold Fn + W for Device 2.
- Press and hold Fn + E for Device 3.
- On your device (computer, tablet, smartphone), open Bluetooth settings and search for new devices.
- Select "ABKO K561" (or similar) from the list of available devices.
- Once paired, the flashing light will become solid or turn off, indicating a successful connection.
- To switch between paired devices, simply press Fn + Q, Fn + W, or Fn + E once.
Operating Instructions
1. Switching Between Wired and Wireless Modes
When the USB-C cable is connected, the keyboard operates in wired mode. When unplugged, it automatically switches to wireless (Bluetooth) mode, connecting to the last active paired device.
2. Backlight Control (RGB)
The K561 features customizable RGB backlighting. Use the following key combinations with the Fn key:
- Fn + Ins: Change backlight mode/effect.
- Fn + Del: Change backlight color (for static modes).
- Fn + Home: Increase backlight brightness.
- Fn + End: Decrease backlight brightness.
- Fn + PgUp: Increase backlight effect speed.
- Fn + PgDn: Decrease backlight effect speed.
3. Multimedia and Function Keys
The F1-F12 keys often have secondary multimedia or system functions when pressed in combination with the Fn key. Refer to the keycap legends for specific functions (e.g., volume control, media playback, calculator, email).
4. Hot-Swap Switch Replacement
The ABKO K561 features hot-swappable switches, allowing you to change switches without soldering. This requires a switch puller tool (often included with the keyboard or purchased separately).
- Carefully remove the keycap using a keycap puller.
- Use a switch puller tool to gently grip the top and bottom clips of the switch.
- Pull the switch straight up to remove it from the PCB.
- Align the pins of the new switch with the holes on the PCB.
- Gently push the new switch down until it clicks into place. Ensure the pins are not bent.
- Replace the keycap.

Image: Detailed infographic illustrating the keyboard's features, including hot-swap switch replacement, dual-mode connectivity, RGB lighting controls, and battery specifications.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the keyboard surface. For deeper cleaning, remove keycaps and use compressed air to clear debris from between switches. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the keyboard frequently. Charge it regularly using the provided USB-C cable.
Troubleshooting
- Keyboard not responding in wired mode:
- Ensure the USB-C cable is securely connected to both the keyboard and the computer.
- Try a different USB port on your computer.
- Test with a different USB-C cable if available.
- Restart your computer.
- Keyboard not connecting via Bluetooth:
- Ensure the keyboard is in wireless mode and has sufficient battery charge.
- Put the keyboard into pairing mode (Fn + Q/W/E).
- Make sure Bluetooth is enabled on your device and it's discoverable.
- Forget the device from your device's Bluetooth settings and try pairing again.
- Ensure no other devices are actively connected to the same Bluetooth profile on the keyboard.
- Keys not registering or double-typing:
- This could indicate a faulty switch. Since the K561 is hot-swappable, try replacing the problematic switch as described in the "Hot-Swap Switch Replacement" section.
- Ensure the keycap is properly seated.
- Backlight not working or stuck:
- Check backlight brightness settings (Fn + Home/End).
- Try cycling through backlight modes (Fn + Ins).
- Ensure the keyboard has enough power.
Specifications
| Feature | Detail |
|---|---|
| Model | K561 |
| Brand | ABKO |
| Connectivity | Wired (USB-C), Wireless (Bluetooth 5.0) |
| Interface Type | USB |
| Switch Type | Mechanical, Hot-Swappable |
| Keycaps | PBT |
| Layout | Standard (Full N-Key Rollover) |
| Backlighting | RGB |
| Battery Capacity | 2000mAh |
| Charging Port | USB Type-C |
| Compatibility | Windows, Mac, Android, iOS |
| Dimensions (L x W x H) | 440 x 130 x 35 mm |
| Weight | 1000g |
| Origin | Mainland China |
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.
ABKO Store offers a return and refund policy. Please check the specific terms and conditions at the point of purchase or on the seller's platform for details.
