1. Product Overview
This product offers a comprehensive range of replacement parts for the KOHAM 25mm Electric Pruning Scissors, model KH-G03-T. These parts are designed to help you maintain and repair your electric pruning shears, ensuring its continued optimal performance. The available components include various mechanical parts, blades, and electronic circuit boards.
Figure 1: Overview of all disassembled replacement parts for KOHAM KH-G03-T electric pruning scissors.
Video 1: Visual demonstration of the various disassembled parts of the electric pruning scissors.
2. Part Identification
Carefully identify the specific part you need to replace using the descriptions and images below. Each part is designed for the KOHAM 25mm Electric Pruning Scissors KH-G03-T.
-
2.1 Blades and Cutting Mechanism
Lower Blade 1pcs, Mainboard, Hall board, Main board+hall board
Aluminum Body, Swing teeth, Blade 1set, Upper Blade 1pcs
- Upper Blade: The primary cutting blade.
- Lower Blade: The stationary blade that supports the cut.
- Blade 1set: A complete set including both upper and lower blades.
- Swing Teeth: Part of the cutting mechanism that facilitates blade movement.
-
2.2 Gearbox and Drive Components
Trigger spring 3pcs, Gear box assembly, Inner gear ring, Output disk
Umbrella tooth, Umbrella tooth bearing 3pcs, Aluminum body snap ring 2pcs, Pin set
Planetary Teeth 3pcs, Planetary gear rack, motor, case
- Gear Box Assembly: The complete gear mechanism.
- Inner Ring: Internal component of the gear system.
- Output Disk: Transfers power from the gearbox to the cutting mechanism.
- Planetary Teeth (3pcs): Small gears within the planetary gear system.
- Planetary Gear Rack: Component that holds the planetary gears.
- Umbrella Tooth: A specific type of gear.
- Umbrella Bearing (3pcs): Bearings for the umbrella tooth.
- Rack: A toothed bar that meshes with a gear.
-
2.3 Electronic Components and Housing
Mainboard, Hall board, Main board+hall board
Trigger
Head cover, charger, button, Head cover screw 4pcs
Motor, Case
- Mainboard: The primary circuit board controlling the scissors' functions.
- Hallboard: A sensor board, often used for motor control or position sensing.
- Main and Hall Board: Combined main and hall sensor board.
- Motor: The electric motor driving the cutting action.
- Trigger: The switch that activates the scissors.
- Trigger Spring: Provides resistance and return for the trigger.
- Button: Control button, possibly for power or mode selection.
- Charger: External power adapter for charging the battery (if applicable, though this is a part for the tool itself).
- Case: The main housing of the electric pruning scissors.
- Head Cover: Protective cover for the cutting head.
- Head Cover Screw (4pcs): Screws for securing the head cover.
- AL Body: Aluminum body component.
- AL Body Ring: Aluminum body ring component.
-
2.4 Fasteners and Small Components
Aluminum body snap ring 2pcs, Pin bearing 2pcs
New Model Pin set, Teeth shaped screw nut + buckle, Buckle 3pcs
Pin set
- Aluminum Body Snap Ring (2pcs): Retaining rings for the aluminum body.
- Pin Bearing (2pcs): Small bearings for pins.
- New Pin Set: A set of pins, possibly an updated version.
- Pin Set: A set of pins.
- Screw Nut Buckle: Fastener combination.
- Buckle (3pcs): Small fastening clips.
3. Installation and Replacement Guide
Replacing parts in your electric pruning scissors requires careful attention to detail. Always ensure the tool is powered off and the battery is removed before attempting any repairs.
- Safety First: Disconnect the battery from the pruning scissors before starting any replacement procedure. Wear appropriate safety gear, including gloves and eye protection.
- Disassembly: Carefully disassemble the pruning scissors to access the faulty part. Take photos or notes during disassembly to aid in reassembly.
- Part Removal: Gently remove the old or damaged part. Pay attention to how it is connected and any small components (springs, washers, screws) that might be easily lost.
- New Part Installation: Install the new replacement part, ensuring it fits correctly and all connections (electrical or mechanical) are secure.
- Reassembly: Reassemble the pruning scissors in reverse order of disassembly. Double-check all screws and fasteners to ensure they are tightened appropriately.
- Testing: Reconnect the battery and perform a functional test in a safe environment, away from any objects or body parts, to ensure the tool operates correctly.
Note: If you are unsure about any step, it is recommended to seek professional assistance to avoid damage to the tool or personal injury.
4. Maintenance of Replacement Parts
Proper maintenance of your replacement parts will extend the lifespan of your electric pruning scissors.
- Blades: Keep blades clean and sharp. After each use, wipe them with a clean cloth to remove sap and debris. Apply a thin layer of oil to prevent rust.
- Gears and Bearings: Periodically inspect gears and bearings for wear. Lubricate moving parts with appropriate grease or oil to ensure smooth operation and reduce friction.
- Electronic Components (Mainboard, Hallboard): Keep these components dry and free from dust and moisture. Avoid exposing them to extreme temperatures.
- Housing and Fasteners: Regularly check the housing for cracks or damage. Ensure all screws and fasteners are tight to prevent parts from loosening during operation.
5. Troubleshooting
This section addresses common issues that might be resolved by replacing specific parts.
| Problem | Possible Cause (Part Related) | Solution |
|---|---|---|
| Scissors not cutting cleanly or getting stuck. | Dull or damaged blades (Upper Blade, Lower Blade, Blade 1set). | Replace the blade set. Ensure proper alignment during installation. |
| Motor runs but blades do not move or move slowly. | Worn or damaged gears (Gear Box Assembly, Planetary Teeth, Umbrella Tooth, Rack), faulty motor (Motor), or damaged output disk (Output Disk). | Inspect and replace worn gears, motor, or output disk. Lubricate new gears. |
| Tool does not power on or has intermittent power. | Faulty mainboard (Mainboard), hallboard (Hallboard), or trigger switch (Trigger). | Check connections and replace the faulty electronic component. |
| Unusual noises or excessive vibration during operation. | Worn bearings (Pin Bearing, Umbrella Bearing), loose fasteners, or damaged internal components. | Inspect and replace worn bearings. Tighten all fasteners (e.g., Head Cover Screw, Screw Nut Buckle). |
6. Specifications
These specifications apply to the replacement parts and the general characteristics of the KOHAM 25mm Electric Pruning Scissors KH-G03-T.
- Material: Metal (for most mechanical parts)
- Type: Combination (referring to the assortment of parts)
- DIY Supplies: Electrical
- Origin: Mainland China
Package Dimensions (Approximate)
- Length: 20 cm
- Width: 15 cm
- Height: 10 cm
- Weight: 1.9 kg
7. User Tips
- Part Identification: Some blades may not have serial numbers or specific markings. Always compare the shape and dimensions of your old part with the images provided to ensure correct replacement.
- Individual Part Availability: Many components, such as the mainboard, are available for individual purchase, allowing for targeted repairs.
- Documentation: Keep this manual and any original documentation for your pruning scissors handy for future reference.
8. Warranty and Support
For specific warranty information regarding individual replacement parts, please refer to the seller's policy at the time of purchase. If you encounter any issues or require further assistance with part identification or installation, please contact the HAOTOOLS Parts Store directly through the platform where the purchase was made.
The seller, HAOTOOLS Parts Store, has a positive feedback rating of 96.4% and a store rating of 4.4, indicating reliable service.