TYT MD-9600

Contents

TYT MD-9600 Digital Analog AES256 DMR Dual Band Mobile Radio Instruction Manual

Model: MD-9600

1. Safety and Overview

1.1. Safety & RFR

Before using this radio, please read the manual which contains important operating instructions for safe usage, RF Energy Awareness, Control information and operational instructions for compliance with RF Energy Exposure limits in Applicable national and international standards. Also read the Operational instruction for safe use.

1.2. Overview

The TYT MD-9600 is a digital mobile radio designed for reliable communication. It features dual-band operation, dual standby, and a dual display for enhanced usability. The radio supports both digital (DMR) and analog modes, offering versatility in various communication environments.

2. Getting Familiar

2.1. Product Components

The MD-9600 package typically includes the main radio unit, a hand microphone, a power cable, a mounting bracket, and a user manual. Additional accessories like antennas or programming cables may be included depending on the specific package.

TYT MD-9600 DMR Mobile Radio with accessories
Figure 2.1: TYT MD-9600 DMR Mobile Radio and included accessories. This image shows the main radio unit, hand microphone, user manual, power cable, mounting bracket, screws, and fuses.

2.2. Radio Layout and Controls

The radio features a clear display and intuitive controls for easy operation.

TYT MD-9600 DMR Mobile Radio front view
Figure 2.2: Front view of the MD-9600 DMR Mobile Radio, showing the display, control knobs, and programmable buttons.

Front Panel Controls:

  • ON/OFF Button: Powers the radio on or off.
  • Volume Knob: Adjusts the audio output level.
  • Channel Knob: Selects channels or navigates menus.
  • ENT (Enter) Button: Confirms selections or enters menus.
  • BAND/ESC Button: Switches bands or exits menus.
  • P1-P4 Side-Keys: Programmable function keys.
  • MIC Jack: Connects the hand microphone.

Hand Microphone Controls:

  • PTT (Push-To-Talk) Button: Press to transmit, release to receive.
  • Up/Down Arrows: Navigate menus or adjust settings.
  • Number Keypad: Input channel numbers, DTMF codes, or text.
  • A/B Button: Exchanges between home screen and sub-screen.
  • Indicate Light: Illuminates red during transmission.

3. Setup

3.1. Installation

The MD-9600 is designed for mobile use and comes with a mounting bracket for secure installation in a vehicle.

TYT MD-9600 DMR Mobile Radio dimensions
Figure 3.1: Dimensions of the MD-9600 radio (175mm length, 50mm height, 140mm width) and its mounting bracket (45mm height, 60mm min width, 110-180mm adjustable length).
TYT MD-9600 DMR Mobile Radio with mounting bracket
Figure 3.2: The MD-9600 radio mounted on its adjustable bracket.

Mounting Steps:

  1. Choose a suitable location in your vehicle that allows for easy access to controls and clear display visibility.
  2. Secure the mounting bracket using appropriate screws. Ensure the bracket is firmly attached to prevent movement during vehicle operation.
  3. Slide the radio into the mounting bracket until it clicks into place.

3.2. Connections

  • Antenna: Connect your VHF/UHF antenna to the antenna connector on the rear of the radio.
  • Power: Connect the provided power cable to the radio's power input and to a stable 13.8V DC power source in your vehicle.
  • Microphone: Plug the hand microphone into the MIC jack on the front panel.
  • Programming Cable: For advanced configuration, connect a programming cable to the dedicated port (usually on the side or rear) and to your computer.

3.3. Initial Power On and Volume Adjustment

  1. Press the ON/OFF button for 1 second to power on the radio. The LED indicator will light up, and the screen will display the startup picture.
  2. Rotate the Volume Knob clockwise to increase the volume, or counter-clockwise to decrease it.

4. Operating Instructions

4.1. Launch and Receive Calls

The radio supports various call types including group calls, single calls, and all calls.

4.1.1. Zone Selection

A Zone is a group of channels. The radio can store up to 250 Zones, each with a maximum of 64 channels.

  1. Press the ENT/MENU key to enter the menu.
  2. Use the Up/Down keys to select 'Zone' and press ENT/MENU to confirm.
  3. The screen will show the chosen zone and its name.
  4. Use the Up/Down keys to select a different zone if needed, then press ENT/MENU to confirm.

4.1.2. ID Selection of Channels, User's ID or Group ID

Select the desired Zone. Then, use the channel knob to select the specific channel, user's name, or group ID.

4.1.3. Receive and Reply Group Call

  1. When a group call is received, the LED indicator will light up.
  2. The display will show the RSSI mark, group name, incoming call ID, and a group call icon (digital mode only).
  3. Hold the microphone 2.5-3cm from your lips.
  4. Press the PTT key to answer the call.
  5. Release the PTT key to receive.

4.1.4. Receive and Reply Single Call

Similar to group calls, but for one-to-one communication.

4.1.5. Receive All Calls

This function allows the radio to receive broadcasts or important information from all users on a channel.

4.1.6. Launch a Radio Call

You can initiate a call using the channel knob, a pre-programmed key, contacts, or manual dialing.

4.2. Emergency Function

The emergency alarm function is used to signal urgent situations. The MD-9600 supports three types of emergency calls: Emergency Alarm, Emergency Alarm and Call, and Emergency Alarm and Voice.

4.2.1. Receiving an Emergency Call

  1. Upon receiving an emergency call, the radio will display the sender's name/ID and emit an alarm sound with the LED indicator on.
  2. If activated, the radio will automatically confirm the emergency alarm.

4.2.2. Replying to an Emergency Call

  1. Press any key to stop the emergency call alarm.
  2. Hold the microphone 2.5-3cm from your lips.
  3. Press the PTT key to respond.

4.2.3. Restarting and Logging Out of Emergency Mode

The radio will restart emergency mode if the channel is changed during an emergency call. To log out, confirm the received emergency call, meet the maximum emergency call limit, or press the pre-programmed emergency off key.

4.3. Menu Operation

The radio's menu system allows access to various settings and functions.

4.3.1. Character and Numeral Input

Use the alphanumeric keypad on the microphone to input characters or numbers. The radio supports English letter and numeral input modes.

4.3.2. Menu Navigation

  1. Press ENT/MENU to enter the main menu.
  2. Use the Up/Down keys to navigate through menu options.
  3. Press ENT/MENU to select an option or enter a sub-menu.
  4. Press ESC to return to the previous menu level.

4.3.3. Radio Check (Digital Mode Only)

This feature allows you to check if another radio is active in the system without disturbing users.

4.3.4. Monitor

The Monitor function allows you to open the microphone of a target radio to listen to sounds around it.

4.3.5. Contact Setting

The Contacts menu acts as an address book, storing aliases or IDs for group calls, single calls, and all calls.

4.3.6. Call Log

The radio records recent dialed, received, and missed calls. You can view, store, or delete these records.

4.3.7. Call Alert Operation

Call alert allows you to suggest a specific radio user to call you back.

4.4. Message Function

The radio supports sending and receiving text messages.

4.4.1. Editing and Sending Messages

  1. Enter the Message menu.
  2. Use the keypad to input your message.
  3. Press ENT/MENU to send or save the message.

4.4.2. Quick Text

The radio supports up to 50 pre-programmed text messages that can be edited before sending.

4.4.3. Managing Failed SMS

In case of failed message transmission, you can choose to resend, forward, or edit the message.

4.4.4. Checking and Deleting Sent/Received Messages

The radio stores sent messages in 'sent items' and received messages in the 'inbox'. You can check, reply to, or delete these messages individually or all at once.

4.5. Utilities and Radio Settings

The Utilities menu provides access to various radio settings and features.

4.5.1. Scanning

The radio supports manual and auto scanning methods to detect active channels or contact groups.

4.5.2. Talkaround

Allows communication when the repeater is out of range or not functioning.

4.5.3. Tones/Alerts

Enable or disable various radio tones and alerts, including keypad tones.

4.5.4. Power

Adjust the RF power output to high (50W VHF / 45W UHF) or low (25W VHF / 25W UHF) depending on communication distance requirements.

4.5.5. Backlight

Configure the screen and keypad backlight settings (always on, 5S, 10S, 15S).

4.5.6. Squelch

Adjust the squelch level to filter out weak signals or background noise.

4.5.7. Intro Screen

Enable or disable the display of the intro screen upon power-on.

4.5.8. Keypad Lock

Lock the keypad to prevent accidental input. Options include manual lock or automatic lock after 5S, 10S, or 15S.

4.5.9. LED Indicator

Activate or deactivate the LED indicator.

4.5.10. Password Lock

Set a power-on password (8 digits) to secure the radio.

4.5.11. Record

The radio can record digital calls for up to 8 hours when using 3000 channels and 10000 contacts. This feature is available in digital mode only.

4.5.12. Clock

Set the current time and date for the radio.

4.5.13. Mode

Switch between Channel Mode (CH Mode) and Memory Mode (MR Mode).

4.5.14. Private Call Match / Group Call Match

These features allow direct communication without ID matching when enabled.

4.5.15. Interrupt

Allows the radio to automatically receive transmissions when set to allow interrupt.

4.5.16. Program Radio

This menu allows editing channel contents such as RX/TX Frequency, Channel Name, Time Out Timer (TOT), CTCSS/DCS, Color Code, and Repeater Slot. Access requires a programming password.

5. Maintenance

To ensure optimal performance and longevity of your TYT MD-9600 radio, follow these maintenance guidelines:

  • Cleaning: Regularly clean the radio's exterior with a soft, damp cloth. Avoid using harsh chemicals or solvents.
  • Connections: Periodically check all connections (antenna, power, microphone) for secure fit and signs of wear.
  • Storage: When not in use for extended periods, store the radio in a dry, cool place away from direct sunlight and extreme temperatures.
  • Software Updates: Keep the radio's firmware updated to the latest version for improved features and bug fixes. Refer to the manufacturer's website for updates and instructions.

A maintenance record is provided in the user manual to track service history.

6. Troubleshooting

If you encounter issues with your MD-9600 radio, consider the following common troubleshooting steps:

  • No Power: Ensure the power cable is securely connected and the 13.8V DC power source is functioning correctly. Check fuses if applicable.
  • No Audio: Verify the volume knob is turned up. Check microphone connection. Ensure squelch level is not set too high.
  • Cannot Transmit/Receive: Check antenna connection. Verify correct channel and frequency settings. Ensure PTT button is functioning. Check if the radio is in emergency mode or keypad locked.
  • Message Transmission Failure: Check signal strength. Ensure recipient ID/alias is correct.
  • Keypad Unresponsive: Check if keypad lock is enabled.
  • Display Issues: If the screen is blank or frozen, try powering the radio off and on.

For more detailed troubleshooting, refer to the comprehensive user manual (PDF) available for download.

7. Specifications

The following table outlines the technical specifications for the TYT MD-9600 DMR Mobile Radio:

Technical Parameters
CategoryParameterValue
GeneralFrequency Range (MHz)VHF: 136-174MHz & UHF: 400-480MHz
Channel Capacity3000
PLL Channel Spacing6.25 / 25 / 12.5 / 25KHz
Voltage RatingDC 13.8V
Operating Temperature-30℃ ~ +60℃
Dimensions (W×H×D)143 x 50 x 175mm
ReceiverFrequency Stability+/-1.0ppm
Digital Sensibility0.3uV/-117.4dBm (BER 5%), 0.7uV/-110dBm (BER 1%)
Analogue Sensibility0.35uV/-116dBm (20dB SINAD), 0.7uV/-120dBm (20dB SINAD)
Rated Audio Power5W
Adjacent Channel SelectivityTIA603C:60dB @12.5kHz, ETSI:60dB @12.5kHz
IntermodulationTIA603C:65dB, ETSI:65dB
Co-channel Rejection12 dB @12.5kHz
Spurious RejectionTIA603C:70 dB, ETSI:70 dB
Audio Distortion @ Rated Audio≤3%
FM Hum and Noise-40dB @12.5kHz, -45dB @25kHz
TransmitterRF Power OutputL:25W H:50W (VHF), L:25W H:45W (UHF)
Audio Distortion3%
FM Hum and Noise-40dB @12.5kHz, -45dB @25kHz
FM Modulation12.5kHz:11KOF3E, 25kHz:16KOF3E
Modulation Limited+/-2.5kHz @12.5kHz, +/-5.0kHz @25kHz
4FSK Digital Modulation12.5kHz only data:7K60FXD, 12.5kHz data and audio:7K60FXE
Conducted/Radiated Emission-36dBm<1GHz, -30dBm>1GHz<4GHz
Digital ProtocolETSI TS 102361-1, -2, -3
Digital Vocoder TypeAMBE++

8. User Tips

  • OpenGD77 Compatibility: Some users have found success with OpenGD77 firmware for enhanced features and customization. Researching this option may unlock additional capabilities for advanced users.
  • Programming Software: Utilize the official programming software for comprehensive radio configuration, including channel settings, contacts, and advanced features.
  • Firmware Updates: Regularly check for and install the latest firmware updates from TYT to ensure optimal performance and access to new features.

9. Warranty and Support

9.1. Warranty Information

The product warranty period begins from the purchasing date. If a product failure occurs under normal use within the warranty period, service will be provided according to the warranty terms. The radio unit is typically guaranteed for 12 months, and accessories for 6 months.

Please retain your warranty card and purchase invoice for warranty service. Service may be subject to charges under the following conditions, even within the warranty period:

  • Failure to produce the warranty card.
  • The warranty card has altered traces or is inconsistent with the product.
  • Defect or damage caused by abnormal or non-normal use, misuse, accident, water, or negligence.
  • Defect or damage caused by improper testing, operation, maintenance, installation, disassembly, or adjustment.
  • Defect or damage caused by unauthorized repair or disassembly.
  • Defect or damage caused by force majeure.
  • Wear and tear under normal use.

9.2. Support

For further assistance, technical support, or warranty claims, please contact your dealer or an authorized service station. You may also refer to the full user manual in PDF format for detailed instructions and diagrams: TYT MD-9600 User Manual (PDF).


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.