SMARTOUR AHD Rear View Camera User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SMARTOUR AHD Rear View Camera. Designed for enhanced safety and convenience, this camera offers high-definition video and night vision capabilities to assist with reversing and parking maneuvers.

2. Safety Information

• Ensure all connections are secure and properly insulated to prevent short circuits.
• Disconnect the vehicle's battery before beginning installation to avoid electrical hazards.
• Do not obstruct the driver's view or interfere with vehicle controls during installation.
• Consult a professional if you are unsure about any part of the installation process.
• This camera is an aid for reversing and parking; always check your surroundings visually.

Product Overview

Video: A brief overview of the SMARTOUR AHD Rear View Camera's features and design.

3. Package Contents

Please check that all items are present in your package:

• SMARTOUR AHD Rear View Camera
• Video Cable (6 meters)
• Power Cable

Image: Contents of the product package, including the camera and necessary cables.

4. Product Features

• High Definition 1080P: Provides clear and sharp images for improved visibility.
• Starlight Night Vision: Enhances visibility in low-light conditions, making night driving safer.
• Golden Fisheye Lens: Offers a wide 175° viewing angle to minimize blind spots.
• Waterproof and Shockproof: Durable design for reliable performance in various weather conditions.
• Adjustable Control Lines: Allows switching between AHD/CVBS video formats and enabling/disabling parking guide lines.

Image: Visual representation of the camera's AHD 1080P Starlight Night Vision and Fisheye Lens capabilities.

Image: The camera's waterproof and shockproof features highlighted.

Image: Demonstration of the fisheye wide-angle lens providing a 180-degree view.

5. Specifications

Image: Camera dimensions for compatibility check.

6. Installation

6.1 Pre-Installation Check

Before purchasing and installing, please verify the dimensions of your vehicle's license plate light housing to ensure compatibility. The camera dimensions are approximately 70mm x 32mm.

Image: Example of camera installation in a vehicle's license plate light housing.

6.2 Wiring Diagram

The camera requires connection to your vehicle's power supply and a display unit (e.g., car stereo with screen).

Image: Detailed wiring diagram for camera connection and control lines.

1. Power Connection: Connect the red wire of the power cable to your car's reverse light positive (+) and the black wire to ground (-). This ensures the camera powers on when reversing.
2. Video Connection: Connect the yellow RCA connector of the video cable to the camera's video output and the other end to your car display's video input (usually labeled "Reverse Camera Input" or "Video In").
3. Control Lines: Refer to section 7.2 for details on adjusting the blue and white control lines.

7. Operation

7.1 Basic Operation

The camera automatically activates when your vehicle is shifted into reverse gear, displaying the rear view on your connected car display.

7.2 Control Line Adjustment

The camera features two adjustable control lines to customize its functionality:

Image: Instructions for adjusting the blue and white control lines.

• Blue Line (CVBS / AHD 1080P Switch):
  • For AHD 1080P output: Cut the blue wire. AHD provides a clearer image than CVBS.
  • For CVBS output: Keep the blue wire intact.
• White Line (Control Parking Line):
  • To display parking guide lines: Keep the white wire connected.
  • To remove parking guide lines: Disconnect (cut) the white wire.

Important:

• Perform control line adjustments before final installation and sealing.
• Ensure your car display supports the selected video format (AHD or CVBS).

8. Maintenance

• Regularly clean the camera lens with a soft, damp cloth to ensure clear visibility. Avoid abrasive cleaners.
• Check all wiring connections periodically for signs of wear or corrosion.
• Ensure the camera is securely mounted and free from obstructions.

9. Troubleshooting

9.1 No Image or Distorted Image

• Check Power: Ensure the camera is receiving power when the vehicle is in reverse.
• Check Video Connection: Verify the video cable is securely connected at both the camera and the display unit.
• Verify Video Format: If your display unit is not showing an image or the image is distorted, ensure the camera's video format (AHD/CVBS) matches your display's capabilities. Adjust the blue control line as needed (see Section 7.2).
• AHD Compatibility: If you intend to use AHD 1080P and cannot select it on your car display, your display may not support AHD cameras. In this case, you might need to switch the camera to CVBS mode (do not cut the blue wire) or adjust your car's settings.

  Image: Car display settings for AHD/CVBS selection. Navigate to Car Settings >> Factory Settings >> HD Reversing Settings >> Select CVBS / AHD 1080P.

9.2 Parking Lines Not Appearing/Disappearing

• Check White Control Line: Ensure the white control line is connected (for parking lines) or disconnected (to remove parking lines) as desired (see Section 7.2).

9.3 Poor Night Vision

• Clean Lens: Ensure the camera lens is clean and free from dirt or condensation.
• Check Ambient Light: While the camera has starlight night vision, extremely dark conditions may still limit visibility. Ensure reverse lights are functioning.

10. User Tips

• Always test the camera's functionality and control line settings (AHD/CVBS switch, parking lines) before fully reassembling your vehicle's interior panels.
• Consider using heat shrink tubing or electrical tape to properly insulate any cut control wires to prevent accidental changes or short circuits.
• For optimal viewing, ensure the camera is mounted centrally and securely.

11. Warranty and Support

For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.