1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Herdio 100W 4 Inch Marine Waterproof Bluetooth Box Speakers. Designed for heavy-duty environments, these speakers are ideal for marine applications, ATVs, UTVs, golf carts, and tractors, offering robust audio performance in challenging outdoor conditions. Please read this manual thoroughly before using the product to ensure proper setup and safe operation.
2. What's in the Box
Carefully unpack your Herdio Marine Bluetooth Speakers and verify that all the following items are included:
- A Pair of 4-inch Box Speakers (x2)
- Bluetooth Amplifier Box (x1)
- DC 12V Power Cable (x1)
- Mounting Brackets with Screws (x2 sets)
- User Manual (x1)


3. Specifications
| Feature | Specification |
|---|---|
| Model Name | H-61BT |
| Special Features | Bluetooth Waterproof Speaker |
| Speaker Type | 4-inch 2-Way Full Range Stereo Pod Speakers with 1" PEI Dome Tweeter |
| Out Power | MAX 100 Watts (per pair) |
| Impedance | 4 Ohm |
| Frequency Response | 65Hz - 20kHz |
| Audio Sensitivity | 89dB |
| Signal To Noise Ratio | N/A |
| Voltage | 12 V DC (3A) |
| Waterproof Grade | IP66 |
| Material | Non-corrosive Metal Grill, Heavy Duty Engineered Plastic Cabinet |
| Dimensions (W x H x D) | 110mm x 110mm x 100mm (4.3" x 4.3" x 3.9") |
| Item Weight | 1.7kg |
| Certification | CE |
| Suitable for | Motorcycle, ATV, UTV, Marine Boat, Golf Cart, Tractor, Outdoor Courtyard |


4. Safety Precautions
- Ensure the power supply is 12V DC. Using an incorrect voltage can damage the device and void the warranty.
- When connecting to a battery, ensure correct polarity (red wire to positive, black wire to negative) to prevent short circuits.
- Do not expose the amplifier box to direct water immersion, despite the speakers being waterproof.
- Avoid installing the speakers in locations that obstruct visibility or interfere with vehicle operation.
- Keep the volume at a safe level to prevent hearing damage and to remain aware of your surroundings.
- If using the speakers at home, a separate 12V to 110V power adapter (not included) is required.
5. Setup & Installation
Follow these steps for proper installation of your Herdio Marine Bluetooth Speakers. For a visual guide, please refer to the installation video below.
5.1. Wiring Connections
- Connect Speaker Cables to Amplifier:
Identify the speaker cables (white for positive, black for negative). Using a small screwdriver, loosen the terminals on the Bluetooth amplifier box labeled "SPK L+", "SPK L-", "SPK R+", and "SPK R-". Insert the corresponding speaker wires into these terminals and tighten the screws securely. Ensure correct polarity for optimal sound.

Figure 5.1: Wiring diagram for speakers and 12V power supply to the amplifier. - Connect Power Supply:
Connect the DC 12V power cable to the "Power Jack" input on the Bluetooth amplifier box. The other end of the power cable (red and black wires) should be linked to your vehicle's 12V battery, ensuring the red wire connects to the positive (+) terminal and the black wire to the negative (-) terminal.
5.2. Speaker Mounting
- Remove Brackets:
Turn the knobs on the sides of each speaker counter-clockwise to loosen and remove the mounting brackets.
- Fix Brackets:
Secure the mounting brackets to your desired surface using the provided screws. Ensure the surface is stable and can support the weight of the speakers.
- Attach Speakers:
Place the speakers onto the fixed brackets and re-attach the knobs. Tighten the knobs clockwise to secure the speakers in place.
- Adjust Speaker Angle:
Loosen the knobs slightly to rotate the speakers 180 degrees, allowing you to adjust the audio direction for optimal listening. Once the desired angle is achieved, tighten the knobs firmly.
6. Operating Instructions
6.1. Bluetooth Pairing
- Power On:
Ensure the amplifier is connected to a 12V DC power source. The blue indicator light on the amplifier will begin to blink, indicating it is in pairing mode.
- Pairing:
On your mobile device (smartphone, tablet, etc.), navigate to the Bluetooth settings. Search for available devices and select "Herdio" from the list. A confirmation tone will sound, and the blue light on the amplifier will become constant, indicating a successful connection.
- Play Music:
Once connected, you can stream music wirelessly from your device to the speakers.

6.2. AUX Input
For non-Bluetooth devices, connect an audio source directly to the "AUX IN" port on the Bluetooth amplifier box using a 3.5mm audio cable (not included). The amplifier will automatically switch to AUX input when a cable is detected.
7. Maintenance
- Cleaning:
Wipe the speakers and amplifier with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the speakers are dry after cleaning, especially if exposed to saltwater.
- Connection Check:
Periodically check all wiring connections to ensure they are secure and free from corrosion, especially in marine environments. Tighten any loose screws or terminals.
- Storage:
If storing the speakers for an extended period, especially in harsh conditions, consider covering them or removing them from the exposed environment to prolong their lifespan.

8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to amplifier/speakers | Incorrect power connection, blown fuse, dead battery. | Check 12V DC power cable connection and polarity. Ensure the battery has sufficient charge. Check for any blown fuses in the power line. |
| No sound from speakers | Incorrect speaker wiring, low volume, incorrect input source, Bluetooth not paired. | Verify speaker cable connections to the amplifier (positive to positive, negative to negative). Increase volume on both the source device and the amplifier. Ensure the correct input (Bluetooth or AUX) is selected/active. Re-pair Bluetooth device. |
| Bluetooth not connecting | Device too far, interference, amplifier not in pairing mode. | Ensure your device is within 65 ft (20 meters) of the amplifier. Turn off and on the amplifier and your Bluetooth device. Check if the blue light on the amplifier is blinking (pairing mode). |
| Distorted sound | Volume too high, poor audio source quality, loose connections. | Lower the volume on both the source device and the amplifier. Try a different audio source. Check all wiring connections for tightness. |
9. User Tips
- Home Use: If you plan to use these speakers in a home environment, remember that they require a 12V DC power supply. You will need to purchase a separate AC-to-DC power adapter (12V, 3A recommended) to convert standard household electricity (e.g., 110V AC) to the required DC voltage.
- Direct Car Radio Connection: The Herdio H-61BT system includes its own Bluetooth amplifier. It is designed to receive audio wirelessly via Bluetooth or through its AUX input. It is not intended for direct connection to a car's existing head unit or car radio without additional adapters or modifications, as it functions as a standalone amplified speaker system.
- Optimal Sound Placement: Utilize the 180-degree rotatable mounting brackets to direct sound precisely where you need it, enhancing your listening experience in various outdoor settings.
10. Warranty & Support
The Herdio H-61BT Marine Waterproof Bluetooth Box Speakers come with a one-year warranty from the date of purchase, covering defects in materials and workmanship under ordinary consumer use. This warranty applies only to hardware components and does not cover damage resulting from accident, misuse, neglect, fire, unauthorized alterations, or commercial use.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer's customer service. Please have your product model number (H-61BT) and proof of purchase ready when contacting support.