Introduction
This manual provides detailed instructions for the DATA FROG Wireless Pro Controllers (Model S80). These controllers are designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, Switch Lite, Switch OLED, iOS, Android, and PC. Please read this manual thoroughly before use to ensure proper operation and to maximize your enjoyment.
Safety Information
- Keep the controller away from water and other liquids.
- Do not expose to extreme temperatures or direct sunlight.
- Avoid dropping or subjecting the controller to strong impacts.
- Do not attempt to disassemble or modify the controller.
- Use only the provided charging cable or a certified equivalent.
- Keep out of reach of small children.
Package Contents
- 2 x DATA FROG Wireless Pro Controllers (Model S80)
- 2 x USB-C Charging Cables (supports data transfer)
Specifications
| Feature | Description |
|---|---|
| Brand | DATA FROG |
| Model | S80 |
| Compatibility | Nintendo Switch, Switch Lite, Switch OLED, iOS (13.0+), Android, PC (wired connection for Windows 7/8/10) |
| Connectivity | Wireless (Bluetooth), Wired (USB-C) |
| Battery Capacity | 900mAh |
| Play Time | Up to 15 hours |
| Charge Time | Approximately 3 hours |
| LED Lighting | 9-Color RGB LEDs with Strobe, Breathing, and Static modes |
| Vibration | Dual motors with 4 adjustable levels (None, Weak, Moderate, Strong) |
| Motion Control | 6-Axis Gyro Sensor |
| Programmable Buttons | 2 back buttons (M1/M2) assignable to 1-16 basic buttons |
| Turbo Function | Auto/Manual Turbo with 3 adjustable speeds (5, 12, 20 shots/s) |
| Wake-up Function | One-key wake-up for Nintendo Switch console |
| Trigger Button Type | Non-Linear |
| Ergonomics | Non-slip, comfortable grip texture |
Setup
1. Charging the Controller
- Connect the provided USB-C charging cable to the controller's USB-C port.
- Connect the other end of the cable to a USB power source (e.g., Nintendo Switch dock, PC, USB wall adapter).
- The LED indicators on the controller will show charging status. A full charge typically takes about 3 hours.
2. Pairing with Nintendo Switch / Switch Lite / Switch OLED
There are two methods for initial pairing:
- Method 1 (Using Pairing Button):
- On your Nintendo Switch console, go to "Controllers" > "Change Grip/Order".
- Press the small pairing button located on the back of the Pro Controller. The indicator lights will flash.
- Once paired, the indicator lights will stop flashing and remain lit on the assigned player number.
- Method 2 (Using Y + HOME Buttons):
- On your Nintendo Switch console, go to "Controllers" > "Change Grip/Order".
- Press and hold the 'Y' button and the 'HOME' button simultaneously on the Pro Controller for 3 seconds. The indicator lights will flash.
- Once paired, the indicator lights will stop flashing and remain lit on the assigned player number.
3. Connecting to PC (Wired Connection Only)
- Connect the controller to your PC using the provided USB-C charging cable.
- The controller will be recognized as a wired gamepad. Wireless functionality is not supported for PC connections.
- Compatible with Windows 7, 8, and 10 for X-Input and Steam games.
4. Connecting to iOS / Android Devices
- Ensure your iOS device is running iOS 13.0 or above.
- Enable Bluetooth on your iOS/Android device.
- Put the controller into pairing mode (refer to Nintendo Switch pairing methods, or consult your device's Bluetooth settings for specific instructions if needed).
- Select the controller from the list of available Bluetooth devices on your phone/tablet.
Operating Instructions
1. Power On/Off
- To power on, press the 'HOME' button.
- To power off, press and hold the 'HOME' button for a few seconds until the indicator lights turn off. The controller will also automatically power off after a period of inactivity.
2. LED Light Modes
The controller features 9-color RGB LEDs on the joysticks with three distinct lighting modes:
- Strobe Mode: Rainbow-colored LEDs flash quickly.
- Breathing Mode: 8 colors of LEDs cycle slowly.
- Static Mode: Joysticks maintain a single chosen color.
To switch between modes or turn off the lights, use the dedicated LED light control button (often indicated by a paw print icon or similar, as shown in diagrams).
3. Programmable Back Buttons (M1/M2)
The controller includes two programmable back buttons, M1 and M2, which can be assigned functions from 1-16 basic buttons (A, B, Y, L, ZL, R, ZR, D-pad directions). This allows for more comfortable and efficient gameplay.
- Press and hold the 'SET' button (usually located near M1/M2) until the indicator light flashes.
- Press the M1 or M2 button you wish to program.
- Press the sequence of buttons you want to assign (e.g., A+B+Y).
- Press the 'SET' button again to save the programming. The indicator light will stop flashing.
4. Turbo Function
The Turbo function allows for rapid, repeated input of a button press. It can be set to auto or manual mode with adjustable speeds.
- Setting Turbo: Press and hold the 'T' (Turbo) button, then press the desired action button (A, B, X, Y, L, ZL, R, ZR). This activates manual Turbo for that button.
- Adjusting Turbo Speed: Press and hold the 'T' button, then move the Right Analog Stick Up or Down to cycle through the 3 speeds: 5 shots/s, 12 shots/s, or 20 shots/s.
- Clearing Turbo: Repeat step 1 to deactivate Turbo for a specific button, or press and hold 'T' and the Minus (-) button to clear all Turbo settings.
5. Vibration Adjustment
The dual vibration motors offer four levels of feedback intensity.
- To adjust vibration, press the vibration adjustment button (often located on the back or bottom of the controller, or a combination of buttons).
- Cycle through the levels: None (0%), Weak (25%), Moderate (50%), Strong (100%).
6. Wake-up Function (for Nintendo Switch)
After initial pairing, you can wake up your Nintendo Switch console directly from sleep mode using the controller.
- Simply press the 'HOME' button on the controller. Your console should power on and connect to the controller.
7. Screenshot and Video Capture
- Press the 'Share' button (usually a square icon) to capture screenshots or video clips, depending on the game and console settings.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in constant use. If storing for an extended period, charge it to about 50% every few months.
Troubleshooting
- Controller not connecting/pairing:
- Ensure the controller is charged.
- Make sure the console/device's Bluetooth is enabled.
- Try re-pairing the controller using the instructions in the "Setup" section.
- If connecting to PC, remember it only supports wired connection.
- Buttons not responding:
- Check if the controller is properly connected.
- Restart the controller and the console/device.
- Ensure no debris is lodged under the buttons.
- Vibration not working:
- Check the vibration settings on the controller and in the game/console settings. Ensure it's not set to "None".
- LED lights not changing:
- Ensure you are using the correct button combination to cycle through LED modes.
User Tips
- PC Connectivity: For PC gaming, remember that these controllers operate via a wired USB-C connection only. They do not support wireless Bluetooth connection to a PC.
- Color Options: The controllers are available in various aesthetic designs, including "Thunder Light" and "Star Sky" patterns, in addition to standard colors.
- Battery Life: To maximize your 15 hours of play time, consider turning off the LED lights when not needed, as they consume battery power.
Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact the DATA FROG customer service team through your retailer or the official DATA FROG website. Please have your product model (S80) and purchase details ready when contacting support.
