1. Introduction
Thank you for choosing the KKMOON FJ3390A Professional Weather Station. This device is designed to provide comprehensive weather data, including temperature, humidity, wind speed, wind direction, and rainfall, along with weather forecasts and timekeeping functions. This manual will guide you through the setup, operation, and maintenance of your new weather station.

Figure 1: FJ3390A Weather Station with Outdoor Sensor and Indoor Display
2. Package Contents
Please check the package contents to ensure all items are present and in good condition:
- 1 x Weather Station (Main Display Unit)
- 1 x USB Power Cable
- 1 x Multi-combination Wireless Remote Sensor (for Wind Speed and Rainfall)
- 1 x Instruction Manual (Available in EN/DE/FR/IT/ES)
- 1 x Set of Installation Accessories (screws, wall plugs, mounting bracket)

Figure 2: Contents of the FJ3390A Weather Station Package
3. Product Overview
3.1 Outdoor Sensor Components
The multi-combination wireless remote sensor is designed to collect various outdoor weather data. Its key components are:
- Rainfunnel: Collects rainfall data.
- Solar Panel: Provides supplementary power to the sensor, extending battery life.
- Temperature Humidity Induction Box: Houses sensors for outdoor temperature and humidity measurements.
- Wind Speed Cups: Measures wind speed.
- Bubble Level: Assists in ensuring the sensor is installed horizontally for accurate readings.
- Wind Direction Vane: Determines wind direction.
- Installation Base: For mounting the sensor securely.

Figure 3: Outdoor Sensor Labeled Diagram
3.2 Main Display Unit Features
The main display unit features a color screen that presents all collected weather data and time information. Key features include:
- 12/24 hour time, date, and week display.
- Weather forecast with changing trends and frost warning.
- Two daily alarms with snooze function.
- Temperature and humidity readings (indoor and outdoor).
- Atmospheric pressure display.
- Background lighting.
- USB charging port.
- Wireless sensor connectivity.

Figure 4: Main Display Unit Features
4. Setup and Installation
Follow these steps to set up your weather station:
4.1 Powering the Units
- Outdoor Sensor: Insert 3 x AA batteries (not included) into the outdoor sensor's battery compartment. Ensure correct polarity. The solar panel will help extend battery life.
- Main Display Unit: Power the main unit using the provided USB cable (DC 5V1.2A adapter not included) or by inserting 2 x AA batteries (not included) into its battery compartment. For continuous backlight and optimal performance, USB power is recommended. When powered by batteries alone, the backlight will only illuminate for 15 seconds per activation.
4.2 Sensor Placement
The outdoor sensor should be installed in an open area to ensure accurate readings for wind, rain, temperature, and humidity. Use the included installation accessories to securely mount the sensor.
- Ensure the sensor is level using the built-in bubble level for accurate rainfall and wind direction measurements.
- Mount the sensor away from obstructions like buildings or trees that could block wind or rain.
- The wireless transmission range is up to 100 meters (300 feet) in an open area. Position the sensor within this range of the main display unit.
4.3 Main Display Unit Placement
The main display unit can be placed on a flat surface (standing station) or mounted on a wall.

Figure 5: Flexible Placement Options for Main Unit and Sensor
4.4 Initial Synchronization
Once both units are powered, they should automatically synchronize. If not, refer to the detailed instruction manual (EN/DE/FR/IT/ES) for manual synchronization steps.
5. Operation
This section covers the basic operation of your weather station.
5.1 Time and Date Settings
- The device features a perpetual calendar up to the year 2099.
- You can select the week language from eight options: English, German, French, Italian, Spanish, Dutch, Danish, and Russian. Refer to the full instruction manual for specific button presses to adjust these settings.
5.2 Alarm Functions
- Set up to two daily alarms.
- The automatic snooze function can be set to OFF or for a duration of 5 to 60 minutes. The alarm time, alarm period, snooze time, and number of snoozes are all configurable.
5.3 Weather Data Display
The main display unit shows a variety of weather information:
- Weather Forecast: Displays predicted weather conditions and trends.
- Temperature & Humidity: Shows both indoor and outdoor readings.
- Wind Speed & Direction: Real-time measurements from the outdoor sensor.
- Rainfall: Accumulated rainfall data.
- Atmospheric Pressure: Current barometric pressure.
- Calculated Indices: Displays somatosensory temperature, wind chill index, thermal index, and dew point temperature, derived from the detected environmental data.
5.4 Warning Functions
The weather station includes customizable warning functions:
- Set upper and lower limits for temperature and humidity.
- Set an upper limit for wind speed.
- Set an upper limit for rainfall.
- The device will alert you when these limits are exceeded.
5.5 Backlight Control
The display features a Class 3 backlight. When powered by USB, the brightness can be adjusted. When running on batteries, the screen will only light up for 15 seconds per activation to conserve power.
6. Maintenance
Proper maintenance ensures the longevity and accuracy of your weather station.
- Cleaning: Wipe the main display unit and outdoor sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries in both units when the low battery indicator appears on the display. Ensure to use fresh AA batteries.
- Outdoor Sensor: Periodically check the rainfunnel for debris (leaves, dirt) and clear it to ensure accurate rainfall measurements. Ensure the wind speed cups and wind direction vane rotate freely.
- Placement: Re-check the outdoor sensor's level periodically, especially after strong winds or storms, to maintain accuracy.
7. Troubleshooting
If you encounter issues with your weather station, try the following common solutions:
- No Display/Power:
- Check if the USB power cable is securely connected to the main unit and a power source.
- Ensure batteries in both units are correctly inserted and not depleted. Replace if necessary.
- No Outdoor Data:
- Ensure the outdoor sensor is within the 100m (300 feet) transmission range of the main unit and there are no major obstructions.
- Check the outdoor sensor's batteries.
- Try re-synchronizing the outdoor sensor with the main unit (refer to the full manual for specific steps).
- Inaccurate Readings:
- Ensure the outdoor sensor is installed level using the bubble level.
- Verify the outdoor sensor is free from debris, especially the rainfunnel and wind sensors.
- Ensure the outdoor sensor is not exposed to direct sunlight for prolonged periods if temperature readings seem too high, or near heat sources/vents.
- Display Issues:
- If the backlight is dim or intermittent, ensure the main unit is powered via USB for continuous brightness adjustment.
For more detailed troubleshooting, please consult the comprehensive instruction manual included in your package.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | FJ3390A Hygrothermograph |
| Brand | KKMOON |
| Color | Black |
| Material | ABS |
| Display Type | DIGITAL |
| Indoor Temperature Range | 0 ~ +50℃ (32 ~ 122 ℉) |
| Indoor Humidity Range | 20 ~ 95% |
| Indoor Detection Cycle | 60 seconds |
| Outdoor Temperature Range | -40 ~ +70℃ (-40 ~ 158 ℉) |
| Outdoor Humidity Range | 20 ~ 95% |
| Air Pressure Range | 600 ~ 1100 HPA (17.72 ~ 32.48 INHG & 450 ~ 825.1 mmHg) |
| Wind Speed Range | 0 ~ 180 km/h (0 ~ 111 mph) |
| Wind Direction Range | 0 ~ 359 degrees |
| Rainfall Range | 0 ~ 9999mm (0 ~ 393.7in) |
| Main Unit Power Supply | USB cable (DC 5V1.2A) or 2 x AA batteries (not included) |
| Outdoor Sensor Power Supply | 3 x AA batteries (not included) |
| Outdoor Sensor RF Frequency | 433.92MHZ |
| Transmission Range | 100 meters (300 feet) in open area |
| Host Size (L x W x H) | 20.5 x 13 x 3 cm (8.07 x 5.12 x 1.18 inch) |
| Sensor Size (L x W x H) | 38 x 30 x 9 cm (14.96 x 11.81 x 3.54 inch) |
| Package Weight | 1693g (59.72oz) |

Figure 6: Product Dimensions
9. User Tips
- Battery Type for Outdoor Sensor: While the outdoor sensor includes a solar panel, it is designed to be powered by 3 x AA batteries. The solar panel primarily extends the lifespan of these batteries or powers internal components, rather than fully recharging standard disposable AA batteries. For best performance, use high-quality alkaline or rechargeable AA batteries and ensure they are charged externally before insertion if using rechargeable ones.
- Optimal Backlight: For continuous and adjustable backlight brightness, always power the main display unit using the USB cable. Battery power will only provide a temporary 15-second backlight.
- Accurate Wind Readings: Ensure the outdoor sensor is mounted as high as possible and away from any wind obstructions (e.g., tall buildings, dense trees) to get the most accurate wind speed and direction data.
10. Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty terms, conditions, and support inquiries, please refer to the warranty information provided in the full instruction manual or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.