ipega PG-P5S025S

Contents

IPEGA Vertical Stand for PS5 Slim Console User Manual

Model: PG-P5S025S

1. Introduction

The IPEGA Vertical Stand (Model: PG-P5S025S) is specifically designed to provide a stable and aesthetically pleasing vertical mounting solution for your PlayStation 5 Slim Disc or Digital Edition console. It features integrated RGB lighting with multiple modes to enhance your gaming environment. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal use of your vertical stand.

PS5 Slim console on the vertical stand with RGB lighting, showing the included screw and USB cables.

Figure 1: IPEGA Vertical Stand with PS5 Slim Console and accessories.

Compatibility diagram showing the stand with PS5 Slim Disc and Digital editions, explicitly stating it is not for the original 2020 game console.

Figure 2: Compatibility with PS5 Slim Disc and Digital Editions. Not compatible with the original 2020 PS5 console.

2. Package Contents

Please check the package contents to ensure all items are present:

  • 1 x IPEGA Vertical Stand (PG-P5S025S)
  • 1 x Fixing Screw
  • 1 x USB Power Cable

3. Specifications

FeatureDescription
Model NumberPG-P5S025S
Brandipega
CompatibilityPS5 Slim Disc Edition, PS5 Slim Digital Edition (Not compatible with original 2020 PS5)
Lighting Modes14 (9 monochrome, 5 dynamic)
MaterialDurable ABS
Dimensions (Approx.)Length: 19 cm, Width: 16 cm, Height: 3 cm
Weight (Approx.)0.182 kg
Special FeaturesAnti-slip foot pads, Bottom vents for heat dissipation
Image showing a PS5 Slim console on the stand, emphasizing its stable design and large base compared to a console without a base.

Figure 3: Stable design with anti-slip foot pads.

4. Setup Instructions

Follow these steps to properly install your IPEGA Vertical Stand:

  1. Prepare Console: Turn your PS5 Slim console upside down to access the screw port.
  2. Align the Base: Carefully align the vertical stand with the bottom of your PS5 Slim console, ensuring the screw hole on the stand matches the console's screw port.
  3. Secure the Console: Insert the provided fixing screw into the stand's screw hole and tighten it securely to firmly attach the console to the stand.
  4. Connect Power: Connect the USB power cable from the stand to an available USB port on your PS5 Slim console or a suitable USB power adapter.
Diagram illustrating the four steps for easy installation: aligning the base, mounting screws, connecting power, and touching to adjust light mode.

Figure 4: Easy installation steps for the vertical stand.

5. Operating Instructions (RGB Lighting)

The vertical stand features customizable RGB lighting with 14 different modes.

  • Changing Light Modes: Short press the touch control button (indicated by a hand icon on the stand) to cycle through the 9 monochrome modes and 5 dynamic modes.
  • Turning Off/Saving Light Mode: Long press the touch control button to save the current light mode and turn off the lighting. Another short press will turn the lights back on to the last saved mode.
Diagram showing the 14 RGB light modes (9 static, 5 dynamic) and instructions for short press (switch mode) and long press (save and turn off light).

Figure 5: RGB light modes and control instructions.

6. Maintenance

To ensure the longevity and proper functioning of your vertical stand:

  • Cleaning: Use a soft, dry cloth to wipe the stand. Avoid using abrasive cleaners or solvents.
  • Dust: Regularly check and clean any dust accumulation around the vents to maintain optimal airflow.
  • Power Disconnection: If you prefer to use the stand without the RGB lighting, you can simply disconnect the USB power cable. The stand will continue to provide stable support for your console.

7. Troubleshooting

ProblemPossible CauseSolution
RGB lights are not turning on.USB cable not connected or loose. No power to the USB port.Ensure the USB cable is securely connected to both the stand and a powered USB port on your console or adapter. Try a different USB port.
Stand feels unstable.Fixing screw is loose. Console not properly aligned.Ensure the fixing screw is tightened securely. Re-align the console on the stand and re-tighten the screw.
Console overheating.Not related to the stand. The stand is designed with vents to not impede heat dissipation.Ensure the console's own vents are clear of obstructions. The stand's design allows for proper airflow from the console's bottom vents.
Diagram demonstrating that the stand's bottom vents allow for proper heat dissipation, contrasting with poor ventilation from other stand types.

Figure 6: Stand design ensures proper heat dissipation for the console.

8. User Tips

  • Console Compatibility: This stand is specifically designed for the PS5 Slim Disc and Digital Editions. It is not compatible with the original (2020) PS5 console. Always verify your console model before installation.
  • Lighting Customization: Experiment with the 14 different RGB light modes to find the perfect ambiance for your gaming setup. A long press on the touch button will save your preferred mode.
  • Minimalist Use: If you prefer a minimalist look or wish to conserve power, you can disconnect the USB cable. The stand will still provide stable vertical support for your console without the RGB lighting.

9. Warranty and Support

The seller offers a 90-day satisfaction guarantee, allowing for exchange or return if you are not satisfied with your purchase. For any product-related issues, technical support, or warranty claims, please contact the seller directly through your purchase platform. Ensure you have your order details readily available for faster assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.