LIZAO CH341A V1.7

Contents

LIZAO CH341A Programmer V1.7 User Manual

Model: CH341A V1.7

Brand: LIZAO

1. Introduction

1.1 Overview

The LIZAO CH341A Programmer V1.7 is a versatile USB-based programmer designed for reading, writing, and erasing various EEPROM and Flash memory chips. It features a dedicated level conversion chip, supporting multiple voltage levels (5V, 3.3V, 2.5V, 1.8V), and an integrated infrared coding function. This compact device is compatible with 64-bit Windows systems and comes with a range of adapter boards for broad chip support.

1.2 Key Features

  • Supports 25 series chips, capable of burning 64M chips.
  • Supports 24 series chips, such as AT24C1024.
  • Supports 93 series chips, such as 93c46.
  • Supports 45 series chips, such as AT45DB161.
  • Supports 95 series automotive storage chips, such as 95160W.
  • Supports KB9011, KB9012, KB9016, KB9018, KB9022 series.
  • Dedicated level conversion chip for 5V, 3.3V, 2.5V, and 1.8V operation.
  • Directly reads and writes W25Q64FW, GD25LQ64, and other 1.8V chips.
  • TTL operation status light flashing.
  • Supports 1.8V TTL level.
  • Integrated infrared coding function.
  • SPI pin interface for direct DuPont cable connection.
  • Three-color reading and writing status lights.
  • Allows for free addition of chip models.
  • Supports 64-bit Windows operating systems.
  • Compact and portable design (64.5mm x 22mm).
  • Supports directly opening Asus cap files.
  • Features a toggle switch for convenient voltage selection.
  • Includes pull-down resistor for 24xx and pull-up resistor for 25xx chips in the seat part.

2. Package Contents

The following items are typically included in the LIZAO CH341A Programmer V1.7 package:

  • 1x CH341A Programmer V1.7 main unit
  • 1x Set of 24/25 Universal Adapter Plate Kit
  • 1x Set of 93 Adapter Plate Kit
  • 1x Set of 45 Adapter Plate Kit
  • 1x Set of QFN8 Adapter Board Kit
  • 1x Set of BGA24 Adapter Board Kit
  • Several Needle Arrangements (Pin Headers)
CH341A Programmer V1.7 with various adapter boards and pin headers
Figure 2.1: CH341A Programmer V1.7 with included adapter boards and pin headers.

3. Product Specifications

SpecificationDetail
ModelCH341A V1.7
Package TypeTQFP
ApplicationComputer (for programming)
TypeModule
OriginMainland China
ConditionNew
Operating Temperature-40°C to 85°C
Supply Voltage5V, 3.3V, 2.5V, 1.8V (selectable)
Dimensions (L x W x H)64.5 mm x 22 mm x 15 mm
Unit Weight17.6g
Total Package Weight28g
CH341A Programmer V1.7 with dimensions
Figure 3.1: CH341A Programmer V1.7 with indicated dimensions.

4. Setup

4.1 Component Identification

Before starting, familiarize yourself with the main components of the CH341A Programmer V1.7:

  • Main Programmer Unit: The core device with a USB connector and ZIF socket.
  • Voltage Toggle Switch: Used to select the operating voltage (5V, 3.3V, 2.5V, 1.8V).
  • SPI Pin Output: For direct connection via DuPont cables.
  • TTL Output: For TTL level operations.
  • Infrared Coding Receiver: For infrared coding functions.
  • Status Lights: Three-color lights indicating read/write status.
  • Adapter Boards: Various boards (SOP, 93, 45, BGA24, QFN8) for different chip packages.
  • Pin Headers: For connecting to adapter boards or custom setups.
Labeled components of the CH341A Programmer V1.7
Figure 4.1: Key components and their labels on the CH341A Programmer V1.7.

4.2 Software Installation

The programmer requires specific software and drivers to function correctly. Please follow these steps:

  1. Download Software: Scan the QR code provided in the product packaging or visit the official website (refer to the 'Warranty and Support' section for a potential link) to download the latest programming software (e.g., AsProgrammer) and necessary drivers.
  2. System Compatibility: Ensure your operating system is 64-bit Windows for full compatibility and optimal performance.
  3. Installation: Follow the on-screen instructions to install the software and drivers. It is recommended to install drivers before connecting the programmer to the computer for the first time.

5. Operating Instructions

5.1 Connecting the Programmer

Connect the LIZAO CH341A Programmer V1.7 to an available USB port on your computer. The system should recognize the device after successful driver installation.

5.2 Chip Preparation

  1. Select Adapter Board: Choose the appropriate adapter board for your target chip's package type (e.g., SOP, 93, 45, BGA24, QFN8).
  2. Insert Chip: Carefully place the chip into the ZIF socket on the programmer or the selected adapter board, ensuring correct orientation. The programming software often provides visual prompts for proper chip placement.
  3. Special Considerations: For 24xx and 25xx series chips, ensure the seat part is locked and the appropriate pull-down/pull-up resistors are engaged as per the chip's requirements.

5.3 Voltage Selection

CRITICAL: Before proceeding, use the toggle switch on the programmer to set the correct operating voltage (5V, 3.3V, 2.5V, or 1.8V) for your specific chip. Selecting an incorrect voltage can permanently damage the chip.

5.4 Software Operation

  1. Launch Software: Open the programming software (e.g., AsProgrammer) on your computer.
  2. Configure Serial Port: Set the serial port number for the CH341A device within the software's settings.
  3. Open Port: Click the 'Open Serial Port' or equivalent button in the software.
  4. Detect Chip: The software should now detect the connected chip. Optimized software often features one-click recognition for 25 series chips and provides guidance on chip placement and voltage settings.
  5. Perform Operations: Use the software interface to perform desired operations such as:
    • Read: Read the existing data from the chip.
    • Erase: Erase the data on the chip.
    • Write: Write new data to the chip.
    • Verify: Compare the written data with the source data to ensure accuracy.
  6. Monitor Status: Observe the three-color reading and writing status lights on the programmer for real-time operational feedback.

5.5 Infrared Coding Function

If utilizing the integrated infrared coding module, ensure the remote control is within range of the programmer's receiving head. The system is designed to automatically recognize the remote and provide visual and auditory prompts during operation.

6. Maintenance

  • Keep the programmer and all adapter boards clean and free from dust, moisture, and debris.
  • Store the device in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • Avoid applying excessive force when inserting or removing chips from the ZIF sockets or adapter boards to prevent damage to pins or the socket mechanism.
  • Periodically check for software and driver updates from the manufacturer's website to ensure optimal performance and compatibility with new chip models.

7. Troubleshooting

7.1 Programmer Not Recognized

  • Ensure the USB connection is secure. Try a different USB port or a different computer.
  • Verify that the necessary drivers have been correctly installed. Reinstall drivers if unsure.

7.2 Chip Not Detected

  • Double-check the chip placement and orientation on the adapter board or ZIF socket.
  • Verify that the correct operating voltage is selected using the toggle switch.
  • Ensure the adapter board is securely connected to the programmer.
  • Clean chip pins and the socket if necessary, as dirt or corrosion can prevent proper contact.
  • Confirm that the specific chip model is supported by the CH341A V1.7 programmer and the version of the programming software you are using.

7.3 Read/Write Errors

  • Re-verify the voltage settings. Incorrect voltage is a common cause of errors.
  • Ensure there is good, stable contact between the chip and the socket/adapter.
  • If using an adapter board, try a different one if available to rule out a faulty adapter.
  • Verify the integrity of the chip itself; some chips may be damaged or faulty.
  • Consult the programming software's error messages for specific diagnostic information.

7.4 Software Issues

  • If the software crashes or behaves unexpectedly, try reinstalling it and its drivers.
  • Check the manufacturer's website or support forums for known issues, updates, or FAQs.

8. User Tips

No specific user tips were available from provided reviews or Q&A. However, always ensure the correct voltage is selected for your chip to prevent damage. Refer to the chip's datasheet for its specific voltage requirements.

9. Warranty and Support

For technical support, software updates, and additional tutorials, please refer to the manufacturer's official website or the following resource:

For specific warranty information, please contact the seller or manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.