GUWIEYG EVLC-CCS2&CCS1-250

Contents

GUWIEYG CCS2 to CCS1 Adapter User Manual

Model: EVLC-CCS2&CCS1-250

Brand: GUWIEYG

1. Introduction

This manual provides essential information for the safe and effective use of your GUWIEYG CCS2 to CCS1 Adapter. This adapter is designed to facilitate charging of CCS1 / SAE-J1772 compatible electric vehicles using CCS2 superchargers or TYPE2 AC chargers. Please read all instructions carefully before operation.

GUWIEYG CCS2 to CCS1 Adapter

Image: GUWIEYG CCS2 to CCS1 Adapter, showing its design and connectors.

Video: Product unboxing and demonstration of adapter installation and use.

2. Important Safety Instructions

WARNING

High Voltage - Handle with care and ensure proper connection before use. Risk of electric shock and serious injury.

When using electric products, basic precautions should always be followed, including the following points. This manual contains important instructions that must be followed during use and maintenance of the adapter.

  1. Read all instructions before using this product.
  2. Do not put fingers into the adapter.
  3. Do not use this product if the flexible output cable, vehicle connector, vehicle inlet, or the adapter itself has broken insulation, broken or cracked housings or if internal parts are accessible, including wiring.
  4. Do not use this adapter with any charger that is capable of operating in dynamic current control mode or boost current mode as the rating of the adapter could be exceeded. There is a risk of shock and fire if the rating is exceeded.
  5. Always connect the adapter to the vehicle inlet first and then connect the vehicle connector to the adapter. When disconnecting, the order should be reversed.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

3. Adapter Overview

The GUWIEYG CCS2 to CCS1 Adapter features a robust design for reliable electric vehicle charging. Familiarize yourself with its components:

Adapter diagram showing CCS2 Supercharger Inlet and CCS1 Coupler

Image: Diagram highlighting the CCS2 Supercharger Inlet and CCS1 Coupler.

Adapter diagram showing CCS1 Unlock Button

Image: Diagram highlighting the CCS1 Unlock Button on the adapter.

4. Specifications

The following table outlines the technical specifications of the CCS2 to CCS1 Adapter:

FeatureSpecification
ModelCCS2 TO CCS1 ADAPTER (AC+DC)
Rated Current250A DC / 32A (Single Phase) AC Max
Rated Input / Output1,000V DC / 250V AC Max
Weatherproof RatingIP54
Operating Temperature-30°C - +50°C
Temperature Sensor Threshold85°C
ConnectorCCS1 / SAE-J1772
InletCCS2 Supercharger / IEC-62196 Type2 Charger
MaterialsPA66/Copper
WarrantyTwo Years
Adapter showing 350A current and 1000V voltage

Image: Adapter highlighting current and voltage capabilities.

Internal view of adapter showing intelligent temperature control and fireproof materials

Image: Internal components of the adapter, emphasizing intelligent dual-temperature control, nickel-copper construction for efficiency, and UL94V-0 fireproof materials.

5. What's Included

Your package should contain the following items:

  • 1 x GUWIEYG CCS2 to CCS1 Adapter
  • 1 x User Manual (this document)
  • 1 x Carrying Case (may vary by package)
Packing list showing adapter, user manual, and carrying case

Image: Contents of the product package, including the adapter, user manual, and a protective carrying case.

6. Before Use

Before using the adapter, please observe the following:

WARNING

Do not use if any damage happens to the adapter. Please contact GUWIEYG for support if you notice any damage.

The adapter is exclusively intended for safe use with CCS1 / SAE-J1772 compatible vehicles from CCS2 supercharger or TYPE2 AC charger (adapter not compatible with Type2 AC charger made by Tesla). Misuse may result in damage and safety hazards.

7. Setup and Operation

Follow these instructions carefully for proper setup and operation of your adapter:

7.1 Compatibility

  • Intended for CCS1 vehicles.
  • Compatible with CCS2 Superchargers.
  • Compatible with Type2 AC chargers (excluding Tesla-made Type2 AC chargers).
Adapter compatibility with CCS2 and Type 2 chargers

Image: Visual representation of adapter compatibility with CCS2 and Type 2 chargers.

Adapter compatibility with CCS1 EVs

Image: Visual representation of adapter compatibility with CCS1 electric vehicles.

7.2 Connection Procedure

  1. Always connect the adapter to the vehicle inlet first.
  2. Then, connect the vehicle connector (from the charging station) to the adapter.
  3. Ensure all connections are firm and secure.

7.3 Disconnection Procedure

  1. When disconnecting, reverse the connection order: first disconnect the vehicle connector from the adapter.
  2. Then, disconnect the adapter from the vehicle inlet.
  3. Do not disconnect during active charging.

7.4 Charging Time

Charging time varies depending on the supercharger station, electric vehicle specifications, environmental conditions, and battery temperature.

The adapter includes built-in temperature monitoring. Charging power may decrease if the internal terminal temperature exceeds 85°C to protect the device and vehicle.

8. Maintenance and Care

  • Protect the adapter from water and moisture.
  • Operate within the temperature range of -30°C to 50°C.
  • Handle with care and store in a safe location when not in use.
  • Do not clean with detergent; use a dry or slightly damp cloth.
  • Do not open or modify the adapter.

9. Troubleshooting

If the vehicle fails to initiate charging, please consider the following steps:

  1. Ensure the vehicle supports CCS charging function.
  2. Check for firm connections at both the CCS2 and CCS1 ends of the adapter.
  3. Safely unplug following the user manual procedure, then begin the connection process again.
  4. Verify the charging status on the Supercharger and the electric vehicle display.
  5. If issues persist, please contact GUWIEYG support.

10. User Tips

  • CCS1 Unlock Button: The button on the side of the adapter is the CCS1 Unlock Button, used to release the adapter from the vehicle's CCS1 inlet.
  • Vehicle Compatibility: Always verify that your specific EV model (e.g., BMW i3, Hyundai Ioniq 5, Mercedes EQS 580, Chevrolet Bolt EUV, Mustang Mach-E, VW ID4, JAC EJS 1) is compatible with CCS1 charging and that you have selected the correct adapter variant if multiple options are available.
  • Actual Charging Power: While the adapter supports up to 1000V DC and 250A, the actual charging power (kW) will depend on your vehicle's battery voltage. For example, a 400V battery with a 250A adapter would charge at a maximum of 100kW (400V * 250A = 100,000W).
  • Adapter Variants: Pay attention to specific model designations, such as 'Fit for BMW i3 Model' versus 'Fit for Other', as these indicate specific design or compatibility differences.

11. Warranty and Support

This product comes with a Two-Year Warranty from the date of purchase.

Need assistance? For maintenance, servicing, or replacements, please contact our support team through the purchase channel where you ordered this adapter. Please have your order details and product model number ready when contacting support.

User manual PDF icon

For additional information, you may refer to the comprehensive user manual available as a PDF document.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.