ipega PG-P5S021

Contents

IPEGA Horizontal Stand with RGB LED Light for PS5 Slim Console

Model: PG-P5S021

1. Introduction

The IPEGA Horizontal Stand with RGB LED Light (Model: PG-P5S021) is designed to enhance your PlayStation 5 Slim console experience. This stand provides a stable horizontal placement, optimizes heat dissipation, and expands connectivity with four additional USB ports. It also features customizable RGB lighting to complement your gaming setup. This manual provides essential information for setup, operation, and maintenance.

2. Package Contents

Please check the package for the following items:

  • Main Horizontal Stand Unit (with RGB lights and USB ports)
  • Left Bracket (for PS5 Slim Disc or Digital Edition)
  • USB Connection Cable
IPEGA Horizontal Stand components and assembled with PS5 Slim
Figure 2.1: IPEGA Horizontal Stand components and assembled with PS5 Slim console.
IPEGA Horizontal Stand components in white
Figure 2.2: Individual components of the IPEGA Horizontal Stand (white variant).

3. Specifications

FeatureDescription
Model NumberPG-P5S021
CompatibilityPlayStation 5 Slim Disc Edition, PlayStation 5 Slim Digital Edition (Not compatible with original PS5 models)
USB Ports4 x USB Ports (1 Fast Charge Port, 3 USB 2.0 Data/Charging Ports)
RGB Lighting Modes14 (5 Dynamic, 9 Static)
Dimensions (approx.)26 cm (Length) x 13 cm (Width) x 4 cm (Height)
Weight (approx.)0.353 kg

4. Setup and Installation

Follow these steps to correctly install your IPEGA Horizontal Stand:

  1. Identify Console Version: Determine if you have the PS5 Slim Disc Edition or the PS5 Slim Digital Edition.
  2. Attach Left Bracket: The left bracket of the stand is designed to fit specifically with either the Disc or Digital Edition. Align the bracket with the corresponding bayonet installation port on your console. No screws or tools are needed; the bracket should snap into place.
  3. Place Console on Stand: Carefully place your PS5 Slim console horizontally onto the assembled stand. Ensure it is seated securely and stably.
  4. Connect USB Cable: Insert the included USB connection cable from the stand into a rear USB port of your PS5 Slim console. This connection powers the RGB lights and the additional USB expansion ports.
  5. Configure PS5 Power Settings: To ensure continuous power supply to the stand's USB ports and RGB lights, you may need to adjust your PS5 console's power settings. Navigate to 'Settings' > 'System' > 'Power Saving' > 'Features Available in Rest Mode' > 'Supply Power to USB Ports' and select 'Always'.
Installation guide for PS5 Slim Disc and Digital Editions
Figure 4.1: Installation guide showing bracket placement for PS5 Slim Disc and Digital Editions.
PS5 Slim on horizontal stand with power settings for USB ports
Figure 4.2: Proper horizontal placement and recommended PS5 power settings for USB ports.

5. Operating Instructions

5.1 RGB Lighting Control

The stand features an independent button for controlling the RGB lighting:

  • Short Press: Press the button briefly to cycle through the 14 available light modes (5 dynamic and 9 static).
  • Long Press (3 seconds): Press and hold the button for approximately 3 seconds to save the current light mode and turn off the lighting. Repeat the short press to turn the lights back on to the last saved mode.
RGB light modes and control button
Figure 5.1: RGB light modes and instructions for the control button.

5.2 USB Expansion Ports

The stand provides four additional USB ports for your convenience:

  • Fast Charge Port: One dedicated port on the front side for faster charging of compatible devices.
  • USB 2.0 Ports: Three standard USB 2.0 ports for data transfer and charging. These are compatible with PS5 DualSense/Edge controllers, USB cables, hard drives, mice, keyboards, cell phones, tablets, and other USB-powered accessories.
Diagram of 4 USB ports on the stand
Figure 5.2: Diagram illustrating the Fast Charge port and three USB 2.0 ports.

6. Maintenance

To ensure the longevity and optimal performance of your IPEGA Horizontal Stand, follow these maintenance guidelines:

  • Cleaning: Wipe the stand regularly with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or solvents that could damage the surface.
  • Airflow: Ensure that the console and stand are placed in an area with adequate ventilation to allow for proper airflow and heat dissipation. Do not block the console's vents.
  • Stability: Periodically check that the console is securely seated on the stand and that the non-slip silicone pads on the bottom are intact to maintain stability.

7. Troubleshooting

  • RGB Lights or USB Ports Not Working:
    • Ensure the USB connection cable is securely plugged into both the stand and a rear USB port on your PS5 Slim console.
    • Verify that your PS5 console's power settings are configured to 'Supply Power to USB Ports' as 'Always' (refer to Section 4, Step 5).
  • Console Feels Unstable on Stand:
    • Confirm that the left bracket is correctly installed for your specific PS5 Slim model (Disc or Digital Edition).
    • Ensure the console is properly aligned and seated on both parts of the stand.
    • Check the non-slip silicone pads on the bottom of the stand for any damage or displacement.
  • Concern About Console Overheating:
    • While the horizontal design aids in heat dissipation, ensure the console's vents are not obstructed by walls, furniture, or other objects.
    • Maintain adequate space around the console for optimal airflow.

8. User Tips

  • Enhanced Stability: The horizontal design of this stand offers greater stability compared to vertical placement, reducing the risk of accidental knocks or damage, especially from children or pets.
  • Space Saving: Placing your PS5 Slim horizontally can save space in certain entertainment setups, allowing for more flexible console placement within media cabinets or shelves.
  • Optimal Cooling: The stand's design promotes better airflow around the console, which can help in accelerating heat dissipation and potentially improving the console's lifespan and performance.
  • Power Configuration: Remember to adjust your PS5 Slim's power settings to 'Always' supply power to USB ports in rest mode if you want the RGB lights and USB charging functions to remain active when the console is in standby.
  • Compatibility Note: This stand is specifically designed for the PS5 Slim (Disc and Digital Editions) and is not compatible with the original PS5 console or the PS5 Pro.

9. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, including duration and terms, please refer to the product packaging or contact your retailer.

For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.