1. Introduction
The ABKO KN03BT TKL is a compact, tenkeyless (TKL) gaming keyboard designed for versatility and performance. It features dual-mode connectivity (Bluetooth 5.0 and USB Type-C wired), multi-pairing capabilities, and durable PBT dye-sublimation keycaps with contact-free switches. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.
2. Package Contents
- ABKO KN03BT TKL Keyboard
- USB Type-C to Type-A Cable
- User Manual
3. Setup
3.1 Initial Charging
- Locate the USB Type-C port on the back of the keyboard.
- Connect the provided USB Type-C cable to the keyboard and the other end to a USB power source (e.g., computer USB port, wall adapter).
- The Charging LED indicator will light up red.
- A full charge takes approximately 3 hours. The Charging LED will turn off once fully charged.
3.2 Wired Mode Connection
- Ensure the keyboard is charged or connected to a power source.
- Locate the mode switch on the back of the keyboard.
- Slide the mode switch to the "USB" position.
- Connect the USB Type-C cable from the keyboard to your computer's USB port.
- The keyboard will be automatically recognized and ready for use.
3.3 Bluetooth Wireless Mode Connection
The keyboard supports multi-pairing with up to 3 devices.
- Ensure the keyboard is charged.
- Locate the power switch on the back of the keyboard and slide it to "ON".
- Locate the mode switch on the back of the keyboard and slide it to the "BT" (Bluetooth) position.
- Select a Bluetooth Channel: Press
FN + Q,FN + W, orFN + Eto select one of the three available Bluetooth channels. The Pairing LED will blink rapidly, indicating it's in pairing mode. - Enable Bluetooth on Your Device: On your computer, tablet, or smartphone, go to Bluetooth settings and enable Bluetooth.
- Pair the Keyboard: Search for available devices. The keyboard will appear as "ABKO KN03BT". Select it to pair.
- Confirmation: Once successfully paired, the Pairing LED on the keyboard will stop blinking and remain solid for a few seconds before turning off.
- Repeat steps 4-7 to pair with up to two additional devices using the other
FN + Q/W/Echannels.
4. Operating Instructions
4.1 Switching Between Devices/Modes
- Switching Bluetooth Devices: In Bluetooth mode, press
FN + Q,FN + W, orFN + Eto switch between the three paired devices. - Switching to Wired Mode: Slide the mode switch on the back of the keyboard to "USB". Ensure the USB cable is connected.
- Switching to Bluetooth Mode: Slide the mode switch on the back of the keyboard to "BT". Ensure the power switch is "ON".
4.2 LED Backlight Control
FN + R: Cycle through different LED lighting modes.FN + T: Change the LED backlight color.FN + Y: Adjust the LED lighting speed.FN + U/FN + I: Decrease / Increase LED brightness.
4.3 Multimedia and Special Functions
Use the FN key in combination with the F-keys for multimedia and system controls:
FN + F1-F12: Access various multimedia functions (e.g., volume control, play/pause, track skip). Specific functions may vary by operating system.FN + Win: Lock or unlock the Windows key to prevent accidental presses during gaming.FN + Left Alt: Switch between Mac and Windows keyboard layout modes for optimal compatibility with your operating system.
4.4 LED Indicators
- Pairing LED: Blinks rapidly during Bluetooth pairing, solid briefly upon successful connection.
- Charging LED: Red when charging, off when fully charged.
- Battery LED: Blinks when the battery level is low, indicating it needs recharging.
5. Maintenance
5.1 Cleaning the Keyboard
- Turn off the keyboard and disconnect it from any power source before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
- For dust and debris between keycaps, use compressed air or a small brush.
- Avoid using harsh chemicals, abrasives, or solvents, as these can damage the keyboard's finish and keycap legends.
5.2 Battery Care
- To prolong battery life, avoid fully discharging the keyboard frequently.
- If storing the keyboard for an extended period, charge it to about 50% before storage.
- Avoid exposing the keyboard to extreme temperatures, which can degrade battery performance.
6. Troubleshooting
- Keyboard not responding in wireless mode:
- Ensure the power switch is ON and the mode switch is set to "BT".
- Check the battery level; recharge if the Battery LED is blinking.
- Try re-pairing the keyboard with your device (see Section 3.3).
- Ensure your device's Bluetooth is enabled and working correctly.
- Keyboard not responding in wired mode:
- Ensure the mode switch is set to "USB".
- Check the USB cable connection at both ends. Try a different USB port or cable.
- Keys not registering or double-typing:
- Clean around the affected keycaps to remove any debris.
- Ensure the keyboard firmware is up to date (check manufacturer's website if available).
- LED backlight not working:
- Ensure the brightness is not set to minimum (use
FN + Ito increase). - Try cycling through LED modes with
FN + R.
- Ensure the brightness is not set to minimum (use
7. Specifications
| Feature | Specification |
|---|---|
| Model | KN03BT TKL |
| Layout | Tenkeyless (TKL), 87 Keys |
| Connectivity | Bluetooth 5.0, USB Type-C (Wired) |
| Multi-pairing | Up to 3 Bluetooth devices |
| Switches | Contact-free switches |
| Keycaps | PBT Dye-sublimation |
| Polling Rate (Wired) | 1000Hz |
| Polling Rate (Wireless) | 125Hz |
| Battery Capacity | 1800mAh |
| Charging Time | Approx. 3 hours |
| Usage Time (LED off) | Approx. 100 hours |
| Usage Time (LED on) | Approx. 10 hours |
| Standby Time | Approx. 360 hours |
| Dimensions (L x W x H) | 362 x 138 x 40 mm |
| Weight | 800g |
| Compatibility | Windows, Mac, Android, iOS |
8. User Tips
- For optimal gaming performance, consider using the keyboard in wired mode to benefit from the 1000Hz polling rate.
- When switching between operating systems (Windows/Mac), remember to use
FN + Left Altto adjust the key layout for correct functionality. - To conserve battery life, especially during extended wireless use, consider turning off or lowering the LED backlight brightness.
- Keep the keyboard's firmware updated by checking the official ABKO website for any new releases.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official ABKO website or contact your retailer. Keep your proof of purchase for any warranty claims.