foreverlily B-LMH220506

Contents

Wireless 7 Colors Face LED Mask

Model: B-LMH220506

Brand: foreverlily

1. Introduction

Thank you for choosing the Wireless 7 Colors Face LED Mask. This device utilizes advanced LED light therapy to provide comprehensive skincare benefits, including skin rejuvenation, anti-acne treatment, and anti-aging effects. This manual provides essential information for the safe and effective use of your LED mask.

LED Facial Mask showing benefits like skin rejuvenation, acne removal, pore shrinking, and skin firming.

Figure 1: LED Facial Mask highlighting key benefits such as skin rejuvenation, acne removal, pore shrinking, and skin firming.

2. Safety Information

Please read all safety warnings carefully before using the device.

  • Eye Protection: Avoid looking directly at the LED light source or observing the light for extended periods. Keep your eyes closed during treatment. If the light feels too strong, use cotton pads or an eye mask to cover your eyes.
  • Skin Conditions: Do not use the mask if you have open wounds, dermatitis, or impaired skin perception on your face. Consult a doctor before use if you have any pre-existing skin conditions.
  • Irritation: If any abnormal symptoms (such as itching, redness, or discomfort) appear during use, stop using the product immediately and consult a doctor.
  • Product Handling: The mask contains delicate circuits and LED components. Do not squeeze, fold, or handle the mask harshly.
  • Water Exposure: Do not immerse the mask in water. For cleaning, wipe the mask body with a damp cloth. The elastic band can be washed separately.
  • Storage: When not in use, store the mask safely, preferably in its original packaging, and keep it away from the bed to prevent accidental damage.
  • Children: This product is not a toy. Keep out of reach of children. Children should not use or play with the device, and cleaning should not be performed by children without adult supervision.
  • Compatibility: It is recommended to use the mask with high-quality skincare products, natural disposable masks, or acne-whitening products for better absorption and results.

3. Product Overview and Components

The Wireless 7 Colors Face LED Mask is a lightweight, comfortable device designed for at-home LED light therapy. It features multiple LED lamp beads to deliver various light wavelengths to your skin.

Diagram of LED mask components including head support, LED beads, silicone pads, charging port, elastic band, touch switch, and indicator light.

Figure 2: Diagram of the LED Mask components.

  1. Head Support Rod: Provides structural support for comfortable wearing.
  2. LED Lamp Beads (90*3pcs): High-purity LED lights that emit various wavelengths.
  3. Medical Grade Silicone Pads: Soft pads for comfort and light sealing around the eyes.
  4. Charging Port: For connecting the USB charging cable.
  5. Elastic Band: Adjustable band to secure the mask on your head.
  6. Touch Switch: Controls power on/off and light color selection.
    • Long press for 1.5 seconds: Power On/Off.
    • Short press: Cycle through 7 colors.
    • Press 8th time: Initiates 7-color cycle mode.
    • Automatic Shut-down: The device will turn off automatically after one minute of standby without operation.
  7. Indicator Light: Shows charging status (Red: Charging; Green: Fully Charged).

4. Setup

4.1. Charging the Device

  1. Locate the charging port (4) on the mask.
  2. Connect the provided USB charging cable to the charging port and plug the other end into a suitable USB power source (e.g., computer, USB wall adapter).
  3. The indicator light (7) will glow red, indicating that the mask is charging.
  4. Once fully charged (approximately 2.5 hours), the indicator light will turn green.
  5. A full charge provides approximately 5 hours of usage time.

4.2. Assembling the Elastic Band

  1. Thread the elastic band (5) through the designated slots on the sides of the mask.
  2. Adjust the length of the elastic band to ensure a comfortable and secure fit around your head.

5. Operating Instructions

How to use the LED mask: clean face, apply mask/serum, wear mask, long press to turn on, 10-15 minutes treatment.

Figure 3: Step-by-step guide on how to use the LED Mask.

5.1. Preparation

  1. Thoroughly clean your face to remove any makeup, dirt, or oils.
  2. For enhanced results, apply a facial mask or your preferred serum evenly to your face before wearing the LED mask.

5.2. Wearing the Mask

  1. Place the LED mask on your face, ensuring the silicone pads (3) are comfortably positioned around your eyes.
  2. Adjust the elastic band (5) for a snug yet comfortable fit that keeps the mask securely in place.

5.3. Power On/Off and Light Selection

  1. Power On/Off: Long press the touch switch (6) for 1.5 seconds to turn the mask on or off.
  2. Selecting Light Color: Once the mask is on, short press the touch switch (6) to cycle through the 7 available LED light colors.
  3. 7-Color Cycle Mode: Press the touch switch an eighth time to activate a mode where the mask automatically cycles through all 7 colors.

5.4. LED Light Functions and Benefits

Each LED light color offers specific benefits for your skin:

Chart showing different LED light colors and their effects: Red for collagen, Green for blackheads/acne, Blue for soothing, Violet for acne scars, Skin Color for brightening, Glaucoma for metabolism, White for firming.

Figure 4: Different LED light colors and their corresponding effects.

  • Red Light (620-630nm): Promotes collagen production, stimulates cell activity, and helps reduce wrinkles and fine lines.
  • Green Light (520-525nm): Balances sebaceous gland activity, reduces blackheads and acne, and helps balance skin's oil and moisture levels.
  • Blue Light (440-465nm): Provides a calming effect, suitable for sensitive, oily, and acne-prone skin. It helps eliminate acne and improve skin's water-oil balance.
  • Purple Light: A dual-frequency light combining red and blue light effects, particularly effective in treating acne and acne marks.
  • Orange Light (590-610nm): Brightens skin tone, whitens skin, helps decompose pigments, and smooths scars.
  • Cyan Light: Gradually enhances cellular energy and promotes skin metabolism.
  • White Light: Penetrates deep layers of the skin, accelerating the metabolism of active tissues for overall skin improvement.

5.5. Treatment Duration

It is recommended to use the LED mask for 10-15 minutes per session. Use 2-3 times a week for optimal results.

5.6. Post-Treatment

After your session, remove the mask. You may continue with your regular skincare routine.

5.7. Video Demonstration

Video 1: Demonstration of the Wireless 7 Colors Face LED Mask in use, showcasing its portability and ease of operation.

6. Maintenance

6.1. Cleaning the Mask

  • Mask Body: Do not immerse the mask in water. To clean, gently wipe the mask body with a soft, damp cloth.
  • Elastic Band: The elastic band can be detached and washed separately with mild soap and water. Ensure it is completely dry before reattaching.
  • Storage: Store the mask in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

  • Mask Not Turning On: Ensure the mask is fully charged. Check the indicator light (7); it should be green when fully charged. If the battery is low, charge the device for 2.5 hours.
  • Lights Appear Dim: A low battery can cause the LED lights to appear dim. Fully charge the device before use.
  • Skin Irritation or Discomfort: Stop using the device immediately. Refer to the Safety Information section (2) and consult a healthcare professional if symptoms persist.
  • Device Not Charging: Ensure the USB cable is properly connected to both the mask and the power source. Try using a different USB cable or power adapter.

8. Specifications

Product specifications and package contents for the LED mask.

Figure 5: Product dimensions, specifications, and package contents.

FeatureSpecification
Item Type7 Color LED mask
MaterialABS+Silicone
ColorWhite
LED Quantity90*3pcs
Power3.7W
Product VoltageDC 5V
Battery Capacity700mAH
Charging Time2.5H
Using Time (Full Charge)5H
Product Weight323g
Product Dimensions23.3cm (9.2in) x 18.6cm (7.3in)

9. User Tips

  • Comfortable Fit: Many users find the mask very comfortable and that it fits perfectly to the face, enhancing the treatment experience.
  • Enhanced Results: For optimal results, apply a facial mask or your favorite serum before using the LED mask. This can triple the absorption effect of your skincare products.
  • Quality Device: Users appreciate the good quality of the mask and its effective illumination.
  • Consistency is Key: Regular use (2-3 times a week for 10-15 minutes) is recommended to achieve noticeable improvements in skin texture and appearance.

10. Warranty and Support

For warranty information, technical support, or any inquiries regarding your Wireless 7 Colors Face LED Mask, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.