MAIWO K10635N Dual-Bay HDD/SSD Docking Station User Manual

1. Product Overview

The MAIWO K10635N is a versatile dual-bay docking station designed for both M.2 NVMe/SATA SSDs and 2.5-inch/3.5-inch SATA HDDs/SSDs. It supports high-speed 10Gbps data transfer via USB-C and features an independent offline cloning function, allowing for direct disk-to-disk duplication without a computer.

Package Contents

• MAIWO K10635N Docking Station
• Power Adapter (12V 3A)
• USB-A to USB-C Data Cable
• User Manual (this document)

Figure 1: MAIWO K10635N Hard Drive Adapter

2. Setup and Installation

2.1. Hardware Installation

1. Insert M.2 NVMe/SATA SSD: Gently insert your M.2 SSD into the M.2 slot at a 45-degree angle. Secure it with the provided silicone screw by spinning it to fix the drive. The adapter supports M.2 SSDs of sizes 2230, 2242, 2260, and 2280.
2. Insert 2.5"/3.5" SATA HDD/SSD: Push your 2.5-inch or 3.5-inch SATA drive into the SATA port in parallel until it is firmly seated.

Figure 2: Drive Installation Overview

Figure 3: Supported M.2 SSD Sizes (2230, 2242, 2260, 2280)

2.2. Connecting to Your Computer

1. Plug the DC end of the power adapter into the DC 12V port on the docking station, then plug the AC end into a power outlet.
2. Connect one end of the USB-A to USB-C data cable to the Type-C port on the docking station and the other end to an available USB port on your computer.
3. Press the Power button on the docking station once. The power light will turn blue, and the hard drive indicator lights will turn white, indicating readiness.

Figure 4: Connection Steps

3. Operating Instructions

3.1. Hard Disk Initialization, Partitioning, and Formatting

If you are using a new hard drive, it needs to be initialized, partitioned, and formatted before use. If you are using an existing drive, it should be recognized automatically.

1. Right-click on 'This PC' (or 'My Computer') and select 'Manage'.
2. In the 'Computer Management' window, navigate to 'Disk Management' under 'Storage'.
3. You will see your new drive listed as 'Disk X' (where X is a number) and marked as 'Not Initialized'. Right-click on the disk and select 'Initialize Disk'.
4. Choose a partition style: 'MBR' (Master Boot Record) for drives up to 2TB, or 'GPT' (GUID Partition Table) for drives larger than 2TB. Click 'OK'.
5. Once initialized, the disk will show as 'Unallocated'. Right-click on the unallocated space and select 'New Simple Volume'.
6. Follow the 'New Simple Volume Wizard' to specify the volume size, assign a drive letter, and format the volume (NTFS is recommended for Windows).
7. After formatting, your drive will be ready for use and accessible from 'This PC'.

3.2. Offline Clone Function

The offline clone function allows you to duplicate data from a source drive to a target drive without connecting to a computer. Ensure the capacity of the target drive is equal to or greater than the source drive.

1. Prepare Drives: Insert your source drive into one bay and your target drive into the other.
2. Set Clone Direction: Use the 'Clone Setting Key' switch to select the cloning direction:
   • NVMe → SATA Clone: Toggle the switch to the left. (Source: M.2 NVMe, Target: SATA)
   • SATA → NVMe Clone: Toggle the switch to the right. (Source: SATA, Target: M.2 NVMe)
3. Power On: Connect only the power adapter to the docking station (do not connect to a computer). Press the Power button. The power light will turn on, and both drive indicator lights will illuminate.
4. Start Cloning: Press and hold the 'Clone' button for approximately 5 seconds until the cloning progress lights (25%, 50%, 75%, 100%) begin to flash. Release the button, then press it once again within 1 second to confirm and start the cloning process.
5. Monitor Progress: The cloning progress lights will illuminate sequentially (25%, 50%, 75%, 100%). All lights will remain solid when cloning is complete.

Figure 5: Offline Clone Modes

Figure 6: Detailed Clone Operation Steps

3.3. Auto Sleep Function

The docking station features an intelligent auto-sleep mode. If there is no data activity for 10 minutes, the adapter will automatically enter sleep mode to reduce HDD/SSD power consumption and extend the lifespan of your hard drives.

Figure 7: Auto Sleep Feature

3.4. Indicator Lights

• Power Light: Blue when powered on.
• NVMe Drive Indicator: White, flashes during read/write, off in sleep mode.
• SATA Drive Indicator: White, flashes during read/write, off in sleep mode.
• Clone Progress Indicator (25%, 50%, 75%, 100%): Flashes during cloning, solid blue when cloning is complete.

Figure 8: Indicator Light Guide

4. Maintenance

• Keep the device in a dry, dust-free environment.
• Avoid exposing the device to extreme temperatures or direct sunlight.
• Do not drop or subject the device to strong impacts.
• Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Ensure proper ventilation around the device during operation.

5. Troubleshooting

• Drive Not Recognized:
  • Ensure all cables (power and USB) are securely connected.
  • Try connecting to a different USB port on your computer.
  • For new drives, ensure they are initialized, partitioned, and formatted via Disk Management (see Section 3.1).
  • Check if the drive is properly seated in its slot.
• Cloning Fails or Stops:
  • Verify that the target drive's capacity is equal to or larger than the source drive's capacity.
  • Ensure both drives are properly inserted and detected by the docking station (indicator lights are on).
  • Confirm the clone direction switch is set correctly.
  • Try restarting the cloning process.
• Slow Transfer Speeds:
  • Ensure your computer's USB port supports USB 3.0/3.1/3.2 (for 10Gbps speeds). Connecting to a USB 2.0 port will result in slower speeds.
  • The actual speed may vary depending on the performance of your SSD/HDD and your computer system.

6. Specifications

Figure 9: Product Dimensions and Port Layout

Figure 10: Multi-Device and Multi-System Compatibility

7. User Tips

• Always back up important data from your source drive before initiating any cloning process.
• For optimal performance, ensure your computer's USB port is USB 3.0 or higher.
• When cloning, double-check that the target drive has sufficient capacity (equal to or greater than the source drive) to avoid cloning failures.
• Safely eject the drive from your operating system before disconnecting the docking station to prevent data corruption.

8. Warranty and Support

MAIWO products typically come with a 1-year limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Customer Support

For technical support, warranty inquiries, or further assistance, please contact MAIWO customer service:

• Email: info@maiwoasia.com
• Website: www.maiwoasia.com