GODIAG CAS4/CAS4+ & FEM/BDC Test Platform

Contents

GODIAG Test Platform User Manual

For BMW CAS4/CAS4+ Key Programming and FEM/BDC Module Testing

Introduction

The GODIAG Test Platform is a specialized tool designed for automotive locksmiths and maintenance engineers working with BMW vehicles. It facilitates key programming, module replacement, and diagnostic testing for CAS4, CAS4+, FEM, and BDC immobilizer systems. This manual provides detailed instructions for setting up and operating the device.

GODIAG Test Platform for BMW CAS4/CAS4+ and FEM/BDC
Overview of the GODIAG Test Platform components, including both CAS4/CAS4+ and FEM/BDC adapters.

Specifications

Feature Detail
Brand Name GODIAG
Model Name godiag (CAS4/CAS4+ & FEM/BDC Test Platform)
Hardware Version CAS
Software Version CAS
Voltage 12V
Power (W) 8W
Material Plastic
Item Weight 0.8kg
Item Height 5inch
Item Width 12inch
Item Length 30inch
External Testing Certification NONE
Batteries Included No
Origin Mainland China
Dimensions of GODIAG CAS4/CAS4+ Test Platform and cable
Dimensions of the CAS4/CAS4+ Test Platform (7.5cm/2.95in length, 6cm/2.36in width, 3.5cm/1.37in height) and the 50cm/19.69in cable.
Dimensions of GODIAG FEM/BDC Test Platform
Dimensions of the FEM/BDC Test Platform.

Product Overview

CAS4/CAS4+ Test Platform Components

Detailed view of the CAS4/CAS4+ Test Platform components with numbered labels
Labeled components of the GODIAG CAS4/CAS4+ Test Platform.
  1. DB25 female connector (used to connect the male port of GODIAG GT100 / GODIAG OBD2).
  2. Ignition simulated start switch.
  3. Immobilizer dashboard simulated indicator.
  4. Key sensing area.
  5. Screw bolt.
  6. Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
  7. Godiag OEM dedicated CAS4 CAS4+ start control adapter.

FEM/BDC Test Platform Components

Detailed view of FEM/BDC Test Platform connectors (CON8, Odometer, Power, CON7)
Detailed view of FEM/BDC Test Platform connectors: CON8, Odometer Connector, Power Connector, and CON7.
  • DB25 female connector (used to connect the male port of GODIAG GT100).
  • Ignition simulated start switch.
  • CON8 connector.
  • Odometer Connector (connects to the dashboard).
  • Power Connector.
  • CON7 connector.

Setup Instructions

The GODIAG Test Platform is designed for use with external key programming devices such as Xhorse VVDI2, BMW VVDI BIM Tool, Autel IM608, and CGDI. It provides a stable connection for programming and testing BMW CAS4/CAS4+ and FEM/BDC modules on the bench.

1. CAS4/CAS4+ Test Platform Connection

This platform is used for programming new keys when all keys are lost, adding new keys, and replacing CAS4/CAS4+ ECU modules.

Wiring diagram for CAS4/CAS4+ key programming with Godiag GT100 and VVDI2/BMW VVDI BIM Tool/Autel IM608
Connection diagram for CAS4/CAS4+ key programming using the GODIAG Test Platform with a GODIAG GT100 and a key programming device (e.g., VVDI2).
  1. Connect the DB25 female connector of the CAS4/CAS4+ Test Platform to the male port of a GODIAG GT100 or GODIAG OBD2 device.
  2. Connect the CAS4/CAS4+ module to the dedicated power adapter or CAN communication adapter (component 6) of the test platform.
  3. Connect the start control adapter (component 7) to the CAS4/CAS4+ module.
  4. Connect the GODIAG GT100 to your key programming device (e.g., Xhorse VVDI2, Autel IM608, CGDI) and a laptop running the necessary software.
  5. Ensure all connections are secure before proceeding with programming.
CAS4/CAS4+ Test Platform connected to a laptop and VVDI Key Tool Plus Pad
Example setup: CAS4/CAS4+ Test Platform with GODIAG GT100 and VVDI Key Tool Plus Pad.

2. FEM/BDC Test Platform Connection

This platform provides an easy and convenient connection for FEM/BDC immobilizer systems, allowing for new key programming and module replacement on the bench.

GODIAG FEM/BDC Test Platform connected to a tablet (Autel MaxilM)
GODIAG FEM/BDC Test Platform connected to an Autel MaxilM tablet for programming.
  1. Connect the DB25 female connector of the FEM/BDC Test Platform to the male port of a GODIAG GT100.
  2. Connect the FEM/BDC module to the CON7 and CON8 connectors on the test platform.
  3. Connect the odometer connector to the dashboard if required for specific operations.
  4. Connect the power connector to the FEM/BDC module.
  5. Connect the GODIAG GT100 to your key programming device (e.g., Xhorse VVDI2, Autel IM608, Lonsdor K518) and a laptop or tablet running the necessary software.
  6. Ensure all connections are secure before proceeding with programming.
Wiring diagram for FEM/BDC key programming with Godiag GT100 and VVDI Key Tool Plus Pad
Example setup: FEM/BDC key programming with GODIAG GT100 and VVDI Key Tool Plus Pad.

Operating Instructions

The GODIAG Test Platform simplifies key programming and module testing by providing a stable bench connection. Always refer to the specific instructions of your key programming device (Xhorse VVDI2, Autel IM608, CGDI, Lonsdor K518, etc.) for detailed software operations.

1. Key Programming (All Keys Lost / Add New Key)

  1. Remove the CAS4/CAS4+ or FEM/BDC module and the corresponding ECU from the vehicle.
  2. Connect the module to the GODIAG Test Platform as described in the "Setup Instructions" section.
  3. Connect the GODIAG GT100 (or similar breakout box) to the test platform and your chosen key programming device.
  4. Launch the key programming software on your laptop or device.
  5. Follow the software prompts to read out and backup data from the module.
  6. Proceed with programming the new key or adding an existing key.
  7. Perform a synchronization test on the programmed key and the module using the test platform before reinstalling the module in the car.
Software interface for unlocking CAS4, reading D/P, and exchanging CAS4
Example software interface for CAS4 key learning and exchange operations.

2. Module Testing and Synchronization

Before reinstalling a CAS4/CAS4+ or FEM/BDC module into the car, you can use the test platform to verify its functionality and synchronization with the programmed key.

Setup diagram for CAS4/CAS4+ module testing and fault removal with Godiag GT100
Testing CAS4/CAS4+ module communication and fault removal using the GODIAG GT100 and Test Platform.
Synchronization test setup for CAS4/CAS4+ module and key with Godiag GT100
Performing a key synchronization test with the CAS4/CAS4+ module on the test platform.
  1. Connect the module and key to the test platform.
  2. Use the ignition simulated start switch and immobilizer dashboard simulated indicator on the test platform to check communication and key recognition.
  3. Verify that the programmed key synchronizes correctly with the module.
  4. For FEM/BDC modules, you can also test communication and check for malfunctions before reinstallation.
FEM/BDC module connected to the test platform for communication test
Testing FEM/BDC module communication on the test platform.

Maintenance

  • Keep the test platform clean and free from dust and moisture.
  • Store the device in a dry, cool place when not in use.
  • Avoid bending or damaging the communication pins on the connectors. The dedicated OEM fast connectors are designed to prevent this.
  • Regularly check cables for wear and tear. Replace damaged cables immediately.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel for assistance.

Troubleshooting

Problem: Key cannot start the car after programming.

Solution: Use the GODIAG Test Platform to pinpoint whether the issue is caused by a mismatch between the CAS4/CAS4+ or FEM/BDC module and the key. Connect the module and key to the test platform and perform a synchronization test. If synchronization fails, re-program the key or check the module for faults.

Troubleshooting diagram for key synchronization issues with CAS4/CAS4+ module
The test platform helps diagnose key synchronization issues.
Problem: Communication issues with the CAS4/CAS4+ or FEM/BDC module on the test platform.

Solution:

  • Ensure all cables are securely connected to the correct ports on the test platform, the module, and the external programming device.
  • Verify that the power supply to the GODIAG GT100 (if used) is stable.
  • Check for any bent or damaged communication pins on the module or the test platform's connectors. The dedicated OEM fast connectors are designed to prevent bending.
  • Refer to the user manual of your specific key programming device for software-related communication troubleshooting.

User Tips

No specific user tips were available from customer reviews or Q&A for this product at this time. Always ensure you follow the instructions provided by your key programming device manufacturer in conjunction with this test platform.

  • Always back up original data from the module before attempting any programming operations.
  • Ensure a stable power supply to all connected devices during programming to prevent data corruption.
  • Double-check all connections to avoid damage to the module or the test platform.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer, GODIAG, or your authorized dealer. Keep your purchase receipt as proof of purchase.

A user manual in PDF format is available for download: User manual (PDF).

© 2024 GODIAG. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.