1. Introduction and Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your O-KAM 5MP Wireless Indoor/Outdoor WiFi Camera. This camera is designed for security surveillance, offering high-definition video, two-way audio, PTZ control, and smart tracking features for both indoor and outdoor environments.
Key features include:
- 5MP HD Video Resolution
- Two-Way Audio Communication
- AI Auto Tracking and Motion Detection
- PTZ (Pan/Tilt/Zoom) Control via App
- Full Color Night Vision and IR-Cut Filter
- IP66 Waterproof and Weatherproof Design
- Cloud Storage and up to 128GB TF Card Support
- Remote Access via O-Kam APP (Android/iOS)

The O-KAM 5MP Wireless Camera highlighting its main features.
2. Package Contents
Please check the package for the following items:
- O-KAM 5MP Wireless Camera (T Series Single Lens)
- Tweezers
- USB Cable
- Screws and Anchors (x7)
- Threaded Bracket Drilling Template
- Orientation Sticker
- Quick Guide
- Solar Panel (if included in your purchase)
- Support Plate

Included accessories for the O-KAM camera.
3. Camera Structure
Familiarize yourself with the camera's components:

T Series Camera Structure: Reset button, SD card slot, Charge port, and OFF-ON switch.
- Reset Button: Used for resetting the camera to factory settings.
- SD Card Slot: For inserting a Micro SD card for local storage.
- Charge Port: USB port for charging the camera's internal battery.
- OFF-ON Switch: Power switch for the camera.
4. Setup Guide
4.1 Micro SD Card Installation
The camera has a built-in large-capacity battery and supports Micro SD cards up to 256GB for local storage.
- Open the silicone cover at the bottom of the bracket. Ensure the toggle switch is in the "OFF" state. (Important: The camera must be turned off before inserting the Micro SD card).
- Open the black rubber plug on the camera.
- Using tweezers, carefully insert the SD card into the SD card slot until it clicks into place.
- Push the silicone cover back to seal the slot.

Steps for installing the Micro SD card.
4.2 Antenna Placement
For optimal signal reception, ensure the antenna is placed correctly.

Correct antenna placement (V-shape) for best signal.
4.3 Battery Charging & LED Indicator
The camera's battery is not fully charged upon arrival due to shipping regulations. Please charge it fully before first use.
- Use the provided USB cable with a 5V adapter (not included).
- During charging, the LED indicator light will be steady red.
- When fully charged, the red light will turn off.
- A full charge typically takes about 4 hours.
LED Indicator Information:
| LED Indicator | Description |
|---|---|
| Blue light flashes slowly | Waiting for distribution network |
| Blue light is always on | Configuration complete |
| Blue light flashes quickly | Disconnected from the network |
| Green light flashes slowly | Restoring factory settings |
| Green light is always on | AP mode |
| Steady red light | Charging |
| Red light goes out | Fully charged |
4.4 Download App
To control and monitor your camera, download the O-KAM Pro app:
- Scan the QR code below with your smartphone.
- Alternatively, search for "O-KAM Pro" in the Apple App Store or Google Play Store.

Scan to download the O-KAM Pro app.
4.5 Add a Camera
- Log into the O-KAM Pro app.
- Follow the in-app prompts to connect to your Wi-Fi network and add your camera.
- For new users, a video guide is available on the app's homepage for more information.
- Place the camera near your Wi-Fi router during the initial configuration process.
- In the app's QR code scanning interface, you can either scan the QR code located on the camera or select the "WiFi camera" option.
4.6 Wi-Fi Set-Up
- The camera only works with 2.4 GHz Wi-Fi networks; it does not support 5 GHz Wi-Fi.
- Avoid using special characters or symbols (e.g., @~!#$%^&*) in your Wi-Fi name or password.
- Perform the Wi-Fi configuration near your Wi-Fi router for a stable connection.
4.7 Physical Installation Guide
- Use the provided drilling template to mark the holes on your desired mounting surface.
- Drill 4 holes using a 15/64" (6mm) drill bit.
- Insert the provided anchors into the drilled holes.
- Align the support plate with the holes and fix it to the wall using the matched screws.
- Align the raised positions on both sides of the camera support with the slots on the support plate. Push the camera upward until it is securely connected to the support plate.

Camera installation steps.
4.8 Solar Panel Installation (Optional)
If your package includes a solar panel, follow these steps for installation:
- Choose an area that receives full sunlight year-round.
- Attach the threaded bracket to your mounting location using the included screws. If the surface is soft or unstable, drill a hole, insert an anchor, then secure the bracket.
- Screw the gimbal into the back of the solar panel and tighten it with the included nut.
- Screw the locking screw into the assembly, ensuring the universal joint is angled upward.
- When adjusting the solar panel's angle (up to 90°), loosen the locking screw, adjust the sleeve rod, and then tighten the locking screw once the panel is in position.
- After installation, verify that all locking mechanisms are tightly secured.

Camera with solar panel for continuous power.
5. Operating Instructions
5.1 Live View and Testing
After setup, tap on the live view window in the O-KAM Pro app to test the camera feed. Then, take your camera to the intended installation spot and perform another test. Ensure the installation spot has a strong 2.4 GHz Wi-Fi signal. If the camera does not perform well, consider moving your router closer or investing in a Wi-Fi extender.
5.2 PTZ Control
The camera offers Pan, Tilt, and Zoom (PTZ) functionality, allowing you to adjust the viewing angle remotely via the app.
- Slide Control: Use the app interface to slide up, down, left, and right to move the camera.
- Rotation Control: Fine-tune the camera's orientation.
- Live Screen Zoom: Pinch to zoom on the live feed.
- PTZ Calibration: Set pre-positions, vertical cruise, and horizontal cruise for automated monitoring paths.

Control the camera's pan (355°) and tilt (90°) via the app.
5.3 Two-Way Audio
The camera features a built-in microphone and speaker, enabling real-time two-way audio communication. You can speak through the app and hear responses from the camera's location.

Engage in real-time conversations using the camera's two-way audio.
5.4 AI Auto Tracking & Motion Detection
The camera is equipped with AI functions for smart tracking and motion detection:
- AI Auto Tracking: When a person or object enters the alarm area, the camera will automatically detect and track their movement, adjusting its pan rotation. It can track moving objects, cars, pets, and humans.
- Motion Detection Alert: Any suspicious movement detected will trigger recording and send instant alarm pushes to your smartphone via the O-KAM Pro app. You can also configure email alerts.

AI Auto Tracking detects and follows movement within the camera's view.

Motion detection triggers alerts and recording.
5.5 Full Color Night Vision
The camera provides clear surveillance even in low-light conditions with its Smart IR-Cut filter and white LED lights. You can choose between:
- Full Color Night Vision: When white LED lights are on, the camera displays colorful video at night.
- Infrared Black and White Night Vision: Standard infrared night vision.

Different night vision modes for enhanced surveillance.
5.6 Device Sharing
You can share access to your camera with family and friends through the O-KAM Pro app:
- Open the O-KAM Pro app and select your camera from the homepage.
- Go to camera settings and click "Share".
- A QR code will be automatically generated.
- Your friend can open their O-KAM Pro app and scan this QR code to gain access.
Note: If you grant "open permission," the shared person can adjust device functions. If you turn off this permission, they can only view the video feed but cannot change settings.
6. User Tips
- Resolution Clarity: This camera features a 5MP sensor, providing significantly clearer images compared to 1080P (2MP) cameras.
- Motion Sensor Range: The PIR (motion sensor) auto on/off light setting has an approximate range of 12 meters (39 feet).
- SD Card Recommendations: For optimal performance, use a brand-name Micro SD card with a capacity between 2GB and 256GB. A high-speed card of Class 4 or above is recommended. Ensure the card is formatted to FAT32.
- Plug Type: When ordering, ensure you select the correct plug type (e.g., EU, US, UK, AU) for your region.
7. Troubleshooting (Common Problems)
7.1 Cannot add camera for the first time?
- Ensure the camera is powered on and the working status light is blinking blue slowly, or you hear "Please use the App to configure WiFi" from the camera.
- Verify that your Wi-Fi account name and password are correct.
- The camera only supports 2.4GHz Wi-Fi. Do not attempt to configure it with a 5GHz Wi-Fi network.
- Perform the configuration close to your Wi-Fi router for a strong signal.
- If QR code network configuration fails, try AP network configuration: your mobile phone can automatically add the camera after connecting to the Wi-Fi hotspot issued by the camera and returning to the app.
- Avoid using overly complicated passwords or those containing special characters like `\`.
- If both methods fail, restart your router and try again.
- If issues persist, provide the nameplate label of your router for further assistance.
7.2 SD card not recognized?
After inserting the SD card, check if its capacity is displayed in the app under "System Settings" > "SD Card Recording Settings". If it shows "No SD card detected", the recognition failed.
- Use a reputable brand SD card.
- Ensure the SD card is recognized by a computer normally.
- Only FAT32 format is supported.
- Recommended capacity is between 2-256GB.
- Use a high-speed SD card of Class 4 or above.
- Try inserting and unplugging the SD card several times.
- Try a different SD card.
- It may take about 30 seconds for the camera to recognize the SD card after insertion.
7.3 What to do if the equipment fails?
- Long press the power button to restart the camera.
- If there is no response, open the USB silicone cover at the bottom of the camera, long press the reset button to reset, and then long press the power button to restart the camera.
8. Specifications (Basic Parameters)
| Feature | Specification |
|---|---|
| Model Number | NINI-RTR75-50SD |
| Brand Name | NINIVISION |
| High Definition | 5.0 Megapixels (5 MP) |
| Lens (mm) | 3.6mm |
| Lens Quantity | Single Lens |
| Sensor | CCD (Sony Sensor Brand) |
| Viewing Angle | 360° (Pan/Tilt 355° Horizontal, 90° Vertical) |
| Connectivity | WIFI (2.4GHz) |
| Two-Way Audio | Support (Built-in Microphone and Speaker) |
| AI Functions | Smart Tracking, Human Detection, AI Auto Tracking |
| Alarm System | Motion Detection/Alert email/APP Push (FTP Photo, Email Photo, Local Alarm) |
| Night Vision | Color Night Vision (Yes), IR Distance 30-40M, IR Cut filter with auto switch |
| Minimum Illumination | 0.001lux |
| IP Rating | IP66 (Waterproof / Weatherproof) |
| Scene | Indoor and outdoor |
| Shell Material | Plastic |
| Installation | Normal |
| Color | Black |
| Power Supply | Normal (DC 5V) |
| Power Consumption | <3W |
| TF Card Storage | Max use 128GB TF Card |
| Cloud Storage | Support (Subscription required) |
| Supported Mobile Systems | Android, iOS (O-Kam APP) |
| Cable length | 3m |
| Operating temperature | -20.5 °C to 48.5 °C (-5 °F to 120 °F) |
| Certification | CE, FCC, RoHS |
9. Maintenance
- Solar Panel Cleaning: If using a solar panel, regularly wipe its surface with a soft, damp cloth to remove any dust or debris, ensuring maximum charging efficiency.
- Firmware Updates: Be sure to update the camera's firmware to the latest version through the O-KAM Pro app to ensure optimal performance, security, and access to new features.
10. Safety Information (FCC Warning)
Please note the following safety and regulatory information:
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
11. Warranty and Support
This product is covered by a manufacturer's warranty against defects in workmanship and materials. For specific warranty details and support, please refer to the official product documentation or contact the seller directly.
For additional assistance, please consult the O-KAM Pro app's help section or visit the NINIVISION support website.