IRIN IN-80 Guitar Wireless System User Manual

Introduction

The IRIN IN-80 is a compact and stable U-band wireless transmission system designed for various musical instruments, including electric guitars, bass guitars, electronic drums, and keyboards. This system provides freedom from cables, offering a reliable and high-quality audio signal transmission over a distance of 30 to 50 meters. With its built-in rechargeable lithium battery and multiple pairing modes, the IN-80 is an ideal solution for musicians seeking convenience and performance.

Setup

Package Contents

Before you begin, please ensure all components are present:

• 1 x Wireless Transmitter
• 1 x Wireless Receiver
• 1 x USB Type-C Charging Cable
• 1 x Instruction Manual

Charging the Units

1. Locate the USB Type-C charging port on the back of both the transmitter and receiver units.
2. Connect the provided USB Type-C cable to the charging port on each unit and plug the other end into a 5V USB power source (e.g., computer USB port, USB wall adapter).
3. The indicator light on the unit will illuminate during charging. A full charge typically takes about 2 hours. The green indicator light will signal the charging status, turning solid green when fully charged.

Initial Connection and Pairing

1. Power On: Press and hold the power button on both the transmitter and receiver units until the indicator light illuminates.
2. Automatic Pairing: The system is designed for automatic pairing. When powered on, the transmitter and receiver will attempt to connect. For one-to-one use, they should pair automatically.
3. Connect to Instrument: Plug the transmitter unit (labeled 'TRANSMITTER') into your instrument's 6.35mm or 3.5mm output jack. The foldable plug allows for flexible positioning.
4. Connect to Amplifier: Plug the receiver unit (labeled 'RECEIVER') into your amplifier's or speaker's input jack.
5. Channel Indicator: If using multiple sets, the channel indicator of each set will show different colors, helping to identify and manage connections.

Operating Instructions

Instrument Compatibility

The IRIN IN-80 system is compatible with a wide range of instruments, including:

• Electric Guitar
• Electric Bass
• Electric Blowpipe
• Electronic Drums
• Keyboards

Channel Selection

The IN-80 features 7 built-in channels. If you are using multiple wireless systems simultaneously in the same area, you can switch the channel of each set separately to avoid interference. The channel indicator on each unit will display different colors to help you distinguish between sets.

Multiple Pairing Modes

The system supports various pairing configurations:

• One Transmitter, One Receiver: Standard setup for a single instrument and amplifier.
• Multiple Transmitters, Multiple Receivers: Each transmitter-receiver pair operates on a different channel to prevent signal overlap.
• One Transmitter, Multiple Receivers: A single transmitter can broadcast to several receivers simultaneously, allowing one instrument to be heard through multiple amplifiers or sound systems.

Power Saving Mode

To conserve battery life, the IRIN IN-80 units will automatically switch off if there is no signal input detected for 30 minutes. This feature helps extend usage time between charges.

Maintenance

Battery Care

• The units feature a built-in 950mA lithium battery. A full charge provides over 7 hours of continuous use.
• Always use the provided USB Type-C cable or a compatible 5V charger.
• Avoid completely draining the battery frequently to prolong its lifespan.
• If storing the units for an extended period, charge them to about 50% capacity and recharge every few months.

Cleaning and Storage

• Wipe the units with a soft, dry cloth to remove dust and grime. Do not use liquid cleaners or solvents.
• Store the units in a cool, dry place away from direct sunlight and extreme temperatures.
• The foldable plugs make the units easy to carry and store, reducing the risk of damage.

Troubleshooting

• No Sound/Connection:
  • Ensure both the transmitter and receiver are fully charged and powered on.
  • Verify that the transmitter is securely plugged into your instrument and the receiver into your amplifier/speaker.
  • Confirm that the units are paired. If not, power cycle both units to re-initiate automatic pairing.
• Interference/Poor Signal:
  • If using multiple wireless systems, ensure each set is operating on a different channel.
  • Reduce the distance between the transmitter and receiver. The effective range is 30-50 meters.
  • Avoid obstacles that might block the signal.
• Unit Powers Off Unexpectedly:
  • Check if there has been no signal input for 30 minutes. The device enters power-saving mode and automatically shuts down in this scenario.
  • Ensure the battery is sufficiently charged.
• Charging Indicator:
  • The green indicator light on the unit will show the charging status. It will be solid green when fully charged.

Specifications

User Tips

• Charging Status: The green indicator light on the unit will clearly show when the device is charging and when it has reached a full charge.
• USB-C Compatibility: The IN-80 uses a modern USB Type-C port for charging, ensuring broad compatibility with current charging solutions.
• Low Latency: While specific latency figures are not provided, wireless systems designed for musical instruments like the IN-80 are engineered to have very low latency to ensure a responsive playing experience.
• Maximize Battery Life: Take advantage of the automatic power-off feature by ensuring no signal is present when not in use, allowing the device to enter power-saving mode.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.