1. Introduction
The Aixun T380 is an intelligent, networking, integrated soldering station designed for rapid and precise welding tasks, particularly for mobile phone SMD, BGA, and PCB repairs. It features a neural network temperature control algorithm for accurate temperature management, smart handle recognition, temperature self-memory, and real-time standby induction. Its portable design and compatibility with T115 and T210 handles make it a versatile tool for various soldering environments.
Figure 1: Aixun T380 Smart Soldering Station highlighting neural network temperature control and smart features.
2. Safety Information
WARNING: Improper use of soldering equipment can cause serious injury or damage. Always follow these safety guidelines:
- Always wear appropriate eye protection (safety glasses) when soldering.
- Work in a well-ventilated area to avoid inhaling solder fumes.
- Do not touch the soldering tip or heated components, as they can reach very high temperatures and cause severe burns.
- Ensure the soldering station is placed on a stable, heat-resistant surface.
- Keep flammable materials away from the soldering area.
- Always turn off and unplug the soldering station when not in use or before performing maintenance.
- Keep out of reach of children.
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.
- Aixun T380 Portable Smart Soldering Station
- Cleaning sponge
- T210 handle (or T115 handle, depending on the purchased variant)
- C210 soldering tip (K knife, or other tip type)
- Certificate
- User manual card
- Charger
Note: Some standard packages may not include a built-in battery. Please check your specific product variant.
Figure 2: Typical package contents for the Aixun T380 Soldering Station.
4. Product Overview and Components
Familiarize yourself with the various parts of your Aixun T380 Smart Soldering Station:
Figure 3: Product diagram with labeled components.
- Soldering Tip Swapping Socket: For easy and quick replacement of soldering tips.
- 1.3 inch Display Screen: Shows temperature, battery status, and other operational information.
- Tip Placing Area: Convenient spot to temporarily rest the soldering tip.
- Standby Bracket Interface: Connects to the adjustable standby holder.
- Handle: Ergonomic handle for T115 or T210 soldering tips.
- Function Button: Used for navigating menus and adjusting settings.
- Handle Holder: Securely holds the soldering handle when not in use.
- Cleaning Sponge: For cleaning the soldering tip.
- Holder Angle Adjustment Knob: Allows adjustment of the handle holder angle for user comfort.
- Type-C Port: For charging and data connection (e.g., software upgrades).
- Power Input Port: Main power connection for the station.
5. Setup Instructions
- Unpack the Station: Carefully remove all components from the packaging.
- Install Soldering Tip: Insert the desired soldering tip firmly into the soldering handle.
- Connect Handle: Plug the soldering handle cable into the designated port on the soldering station.
- Position Standby Holder: Attach the standby holder to the station and adjust its angle using the adjustment knob to your preferred working position.
- Place Cleaning Sponge: Ensure the cleaning sponge is properly placed in its designated tray. Dampen the sponge slightly with water before use for effective tip cleaning.
- Power Connection: Connect the provided charger to the Type-C port or the main power input port on the station. Plug the charger into a suitable power outlet.
- Initial Power On: Press the power button to turn on the station. The 1.3-inch display screen will illuminate.
Video 1: Product demonstration showing setup, operation, and features.
6. Operating Instructions
6.1. Basic Operation
- Power On: Press the power button. The display will show the current temperature and set temperature.
- Temperature Adjustment: Use the function buttons or the rotary knob (if present) to set the desired soldering temperature. The station features a neural network temperature control algorithm for precise and stable temperatures.
- Rapid Heating: The Aixun T380 is designed for rapid heating, capable of melting tin in approximately 1 second.
- Smart Handle Recognition: The station automatically recognizes whether a T115 or T210 handle is connected.
- Real-time Standby Induction: When the soldering handle is placed in the holder, the station will automatically enter a standby mode to conserve energy and prolong tip life.
6.2. Battery Operation (If Applicable)
The Aixun T380 may include a built-in 2600mAh rechargeable battery, offering portability and continuous operation.
- Charging: Connect the station to a power source via the Type-C port. It supports PD/QC fast charge protocols and can be fully charged in approximately 1.5 hours.
- Battery Life: The battery supports continuous soldering for up to 40 minutes under 400°C.
- Battery Status: The display provides battery power alarm, charge reminder, and battery power display.
Figure 4: Illustration of the 2600mAh rechargeable battery and Type-C fast charging feature.
6.3. Software Upgrade
The Aixun T380 supports software upgrades to enhance functionality and performance.
- OTA Upgrade (Over-The-Air): The station has a built-in 5G dual-mode Bluetooth WiFi module, allowing for convenient OTA software updates. Ensure the station is connected to a stable WiFi network.
- USB Upgrade: You can also upgrade the software by connecting the T380 to a computer using a USB cable. Visit www.aixuntech.cn for the latest software and instructions.
Figure 5: The Aixun T380 supports convenient WiFi networking and OTA upgrades.
7. Maintenance
- Soldering Tip Care: Regularly clean the soldering tip using the damp cleaning sponge. Always tin the tip with a small amount of solder before and after use to prevent oxidation and prolong its lifespan. Replace worn or damaged tips promptly.
- Station Cleaning: Wipe the exterior of the soldering station with a soft, dry cloth. Do not use abrasive cleaners or solvents that could damage the finish or internal components.
- Storage: When not in use, store the soldering station in a dry, dust-free environment. Ensure the power is off and the unit is unplugged.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Station does not power on | No power supply; Discharged battery (if applicable) | Check power cable connection; Ensure charger is plugged in; Charge the internal battery. |
| Soldering tip not heating up | Tip not properly inserted; Faulty tip; Loose handle connection | Re-insert tip firmly; Try a new tip; Ensure handle cable is securely connected. |
| Temperature display is inaccurate | Sensor issue; Incorrect calibration (rare) | Ensure tip is clean and properly seated; Contact support if problem persists. |
| Handle not recognized | Loose handle connection; Damaged handle cable | Check and re-secure handle connection; Inspect cable for damage. |
| Software update fails | Unstable WiFi connection; Incorrect USB connection; Outdated software on computer | Ensure strong WiFi signal for OTA; Use a reliable USB cable and port; Download latest update tool from Aixun website. |
9. Specifications
| Feature | Detail |
|---|---|
| Name | Portable Smart Soldering Station |
| Model | T380 |
| Brand | Aixun |
| Applicable Handle Models | T210 / T115 |
| Temperature Range | 100-450°C |
| Rated Power | 80W |
| Charging Voltage | 9-15V |
| Charging Protocol | PD/QC |
| Charging Port | Type-C |
| Host Weight | 2kg |
| Origin | Mainland China |
| Certification | CE |
| DIY Supplies Category | Woodworking |
Note: Above data is provided by Aixun lab; please refer to the actual product for precise measurements and specifications.
10. User Tips
- Tip Tinning: Always tin your soldering tip with a small amount of solder before and after each use. This prevents oxidation, ensures efficient heat transfer, and significantly extends the tip's lifespan.
- Handle Selection: The T380 supports both T115 and T210 handles. Choose the appropriate handle and tip size for your specific soldering task to achieve optimal results.
- Temperature Memory: Utilize the station's temperature self-memory feature for frequently used temperature settings to quickly switch between different soldering requirements.
- Software Updates: Regularly check for and install software updates via WiFi (OTA) or USB. Updates often include performance improvements, bug fixes, and new features.
- Cleanliness: Keep your workspace and the soldering station clean. Dust and debris can affect performance and longevity.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original retailer or the manufacturer directly. Please retain your purchase receipt as proof of purchase for any warranty claims.
