1. Introduction to the De Havilland DH.82 Tiger Moth
The De Havilland DH.82 Tiger Moth is a legendary trainer aircraft, originally designed for the Royal Air Force in the early 1930s. Known for its excellent handling characteristics, it became the primary trainer for the vast majority of RAF and Commonwealth pilots during World War II. Its design, characterized by swept-back wings and a biplane configuration, made it "easy to fly, but difficult to fly well," a quality that helped instructors identify promising pilots.
This kit allows you to build a traditionally constructed, rubber-powered, free-flight model of this iconic aircraft. The kit is designed to replicate the authentic scheme of a yellow Royal Australian Air Force Tiger Moth, though customization is possible.


2. Features
- Traditional Construction: Utilizes the classic "stick and tissue" method, featuring a balsa wood skeleton covered with a tissue skin.
- Rubber Powered: Propelled by a wound rubber strip motor for authentic free-flight performance.
- Free Flight Design: Once launched, the model flies independently, following a predetermined flight path set by trimming.
- Scale Representation: Carefully designed to preserve the shape and spirit of the original DH.82 Tiger Moth aircraft.
- Educational Value: Offers a rewarding building experience that requires patience and skill, ideal for enthusiasts aged 14 and above.
3. Specifications
| Attribute | Value |
|---|---|
| Model | VA08 |
| Wingspan | 600mm |
| Length | 490mm |
| Flying Weight (approx.) | 65g |
| Material | Wood (Balsa) |
| Recommended Age | 14+ years |
| Package Dimensions (L x W x H) | 42cm x 11cm x 4cm |
| Package Weight (approx.) | 0.26kg |
4. Package Contents
The kit includes all necessary materials for constructing the model. Please verify all components are present upon opening the package.

- Precision laser-cut balsa wood parts for the airframe.
- Yellow covering tissue.
- Propeller assembly.
- Rubber motor.
- Landing gear components.
- Decal sheet for Royal Australian Air Force markings.
- Assembly plan/drawing.
- Small accessories (e.g., wire, glue, sandpaper - specific items may vary).

5. Assembly Instructions
Note: This kit involves traditional "stick and tissue" construction, which can be challenging and requires patience and precision. It is recommended for experienced modelers or those willing to dedicate time to learning these techniques. The assembly difficulty is considered extremely high.
5.1 General Assembly Steps
- Study the Plan: Carefully review the included full-scale assembly plan. This plan is your primary guide and acts as an engineering drawing.
- Prepare Parts: Gently remove balsa parts from their sheets. Sand any rough edges as needed.
- Build the Framework: Assemble the balsa wood skeleton (fuselage, wings, tail surfaces) directly over the plan, using appropriate model airplane glue (not included). Ensure all parts are aligned and square.
- Install Components: Integrate the landing gear, propeller mount, and rubber motor attachment points into the framework as per the plan.
- Covering: Apply the yellow tissue covering to the completed balsa framework. This typically involves dampening the tissue, applying adhesive to the framework, and carefully shrinking the tissue with heat (e.g., a low-heat iron) to achieve a taut, smooth surface.
- Final Details: Apply the provided decals to complete the authentic Royal Australian Air Force scheme. Install the propeller and rubber motor.




5.2 Detailed Assembly Diagram
For detailed step-by-step assembly, refer to the comprehensive diagram below. This diagram illustrates the various components and their connections, crucial for accurate construction.

6. Preparation for Flight
6.1 Center of Gravity (CG) Adjustment
Proper balance is critical for stable flight. Before flying, carefully adjust the center of gravity (CG) of your model. The ideal CG position is typically indicated on the assembly plan. You may need to add small amounts of weight (e.g., clay or lead) to the nose or tail to achieve the correct balance.
6.2 Winding the Rubber Motor
The rubber motor provides power for flight. To wind it:
- Hold the propeller firmly to prevent it from spinning.
- Carefully twist the propeller to wind the rubber motor. Wind it slowly and steadily.
- Do not overwind the motor, as this can break the rubber or damage the model. The number of turns will depend on the rubber's elasticity and length; start with fewer turns and gradually increase.
6.3 Pre-Flight Checks
- Ensure all glue joints are dry and secure.
- Check that the wings and tail surfaces are firmly attached and aligned.
- Verify the propeller spins freely.
- Confirm the rubber motor is properly installed and not tangled.
- Inspect the covering for any tears or loose areas.
7. Operating Instructions
This is a free-flight model, meaning once launched, it operates independently. Its flight path is determined by initial adjustments, known as "trimming."
7.1 Trimming for Flight
Trimming involves making small adjustments to the flight surfaces (e.g., bending the rudder or elevator slightly) to achieve a desired flight pattern (e.g., a gentle circle). This is often a trial-and-error process:
- Start with minimal adjustments.
- Launch the model gently into the air with a moderately wound motor.
- Observe its flight path. Does it turn too sharply? Does it dive or climb excessively?
- Make small, incremental adjustments based on observations. For example, if it turns left too much, slightly bend the rudder to the right.
7.2 Launching the Model
- Choose an open, calm area, preferably with grass to cushion landings.
- Hold the model level, slightly nose-up.
- Gently push the model forward and release it smoothly. Avoid throwing it forcefully.
- For initial flights, try to fly over grass as much as possible to minimize damage during landing.

8. Maintenance
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent warping of balsa wood and degradation of the rubber motor.
- Cleaning: Gently wipe the model with a soft, dry cloth to remove dust. Avoid using water or cleaning solutions that could damage the tissue covering or balsa wood.
- Rubber Motor Care: The rubber motor will eventually lose elasticity or break. Replace it with a new one when performance degrades. Lubricating the rubber with a specialized rubber lubricant can extend its life.
- Repairs: Minor damage to the balsa framework or tissue covering can often be repaired with model airplane glue and spare tissue.
- Inspection: Regularly inspect the model for any loose parts, cracks in the balsa, or tears in the covering before each flight.
9. Troubleshooting
- Model Dives Immediately After Launch: The model is likely nose-heavy. Adjust the center of gravity by adding a small amount of weight to the tail or removing some from the nose. Check for excessive down-elevator trim.
- Model Stalls or Climbs Sharply: The model is likely tail-heavy. Adjust the center of gravity by adding a small amount of weight to the nose or removing some from the tail. Check for excessive up-elevator trim.
- Model Turns Consistently in One Direction: The rudder or wing may be warped or trimmed incorrectly. Gently adjust the rudder or aileron trim to counteract the turn.
- Short Flight Times: The rubber motor may not be wound sufficiently, or it may have lost elasticity. Ensure the motor is wound to its maximum safe turns, or replace it if it's old. Check for excessive drag from damaged covering or misaligned components.
- Propeller Not Spinning Freely: Check for obstructions, ensure the propeller shaft is straight, and that the rubber motor is not tangled.
10. User Tips
No specific user tips from reviews or Q&A are available at this time. However, general tips for balsa free-flight models include:
- Patience is Key: Building and trimming a free-flight model requires patience. Don't rush the assembly or the trimming process.
- Lightness Matters: Keep the model as light as possible during construction. Excess glue or heavy paint can negatively impact flight performance.
- Practice Trimming: Trimming is an art. Start with gentle launches and small adjustments. A well-trimmed model will fly gracefully.
- Fly in Calm Conditions: Wind can significantly affect the flight of lightweight free-flight models. Choose calm days for optimal performance.
11. Safety Warnings
- Age Recommendation: This product is recommended for individuals aged 14 years and older due to the complexity of assembly and the use of small parts and sharp tools.
- Adult Supervision: Adult supervision is recommended, especially during assembly and initial flights.
- Choking Hazard: Contains small parts. Keep out of reach of young children.
- Sharp Objects: Assembly may involve sharp tools (e.g., hobby knives, sandpaper). Handle with care.
- Adhesives: Use model airplane glues in a well-ventilated area. Follow the manufacturer's safety instructions for any adhesives used.
- Flying Area: Fly the model in open areas, away from people, animals, buildings, power lines, and roads.
- Rubber Motor: Do not overwind the rubber motor, as it can snap and cause injury. Wear eye protection when winding.
- California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
12. Warranty and Support
For any questions regarding assembly, missing parts, or operational issues, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.