Introduction
The Bakon BK881 is a high-efficiency 2-in-1 soldering and rework station designed for electronic repair and assembly. It integrates a powerful soldering iron and a hot air gun into a single compact unit, offering precision and versatility for professionals, hobbyists, and repair technicians. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your BK881 station.
Packaging List
Please verify that all items listed below are included in your package:
- 1 × Main Machine (Bakon BK881 Station)
- 1 × Solder Handle
- 1 × Solder Stand (includes cleaning sponge and copper wire ball)
- 1 × Rework Handle (Hot Air Gun)
- 1 × Rework Handle Holder
- 2 × Nozzles for Hot Air Gun
- 1 × Instruction Manual
Setup Instructions
Unpacking: Carefully remove all components from the packaging. Inspect for any signs of damage during transit. Retain packaging for future storage or transport.
Placement: Place the main machine on a stable, heat-resistant, and non-flammable surface. Ensure adequate ventilation around the unit.
Connect Soldering Iron: Connect the soldering iron handle cable to the designated port on the main machine (labeled 'SOLDERING'). Place the soldering iron in its stand, ensuring the cleaning sponge is moistened and the copper wire ball is in place.

Diagram showing the main unit and its labeled components, including connection points for the soldering iron and hot air gun.
Connect Rework Handle (Hot Air Gun): Connect the rework handle cable to the designated port on the main machine (labeled 'REWORK'). Place the hot air gun in its holder.
Attach Nozzles: Select an appropriate nozzle for your task and securely attach it to the hot air gun. The package includes two nozzles.

The Bakon BK881 station with the hot air gun and two interchangeable nozzles.
Power Connection: Ensure the power switch on the back of the unit is in the 'OFF' position. Connect the power cord to the main machine and then to a grounded power outlet.
Operating Instructions
General Operation
Power On: Flip the power switch on the back of the unit to the 'ON' position. The 2.9-inch LCD screen will illuminate, displaying the current settings.

Close-up of the 2.9-inch LCD screen displaying temperature settings.
Independent Control: The soldering iron and hot air gun can be controlled independently. Use the dedicated 'SOLDERING' and 'REWORK' buttons to activate and adjust each tool.

Image highlighting the independent control buttons for the soldering iron and hot air gun.
Temperature and Air Volume Adjustment
Setting Temperature: Press the 'Set Key' button to enter temperature adjustment mode. Use the 'Plus Key' (up arrow) and 'Minus Key' (down arrow) to increase or decrease the temperature. Press and hold the adjustment buttons for quick changes. The soldering iron temperature range is 180°C-480°C (356°F-896°F), and the hot air gun temperature range is 100°C-500°C (212°F-932°F).
Video demonstrating temperature adjustment for both the soldering iron and hot air gun, showing quick adjustment by holding buttons.
Setting Air Volume (Hot Air Gun): For the hot air gun, you can also adjust the air volume. Use the appropriate buttons (refer to the display for air volume indicators like F01-F17) to set the desired airflow. The air volume range is F01-F17.
Video demonstrating air volume adjustment for the hot air gun, showing the F01-F17 range.
Temperature Unit Conversion: The unit supports both Celsius (°C) and Fahrenheit (°F). Navigate through the function settings (see 'Function Settings' below) to switch between these units.

Display showing the option to convert between Celsius and Fahrenheit.
Quick Settings (CH1, CH2, CH3)
The BK881 features three shortcut keys (CH1, CH2, CH3) to store and recall frequently used temperature and air volume settings. To set a shortcut:
- Adjust the soldering iron and/or hot air gun to your desired temperature and air volume.
- Press and hold one of the CH1, CH2, or CH3 buttons until the display confirms the setting is saved.
- To recall a setting, simply press the corresponding CH button briefly.

Diagram illustrating the one-key quick setting buttons for CH1, CH2, and CH3.
Auto Standby & Sleep Function
The station is equipped with an auto-sleep function to save energy and prolong the life of the heating elements. When the tools are placed in their respective holders for a set period, they will enter sleep mode (e.g., soldering iron at 180°C, hot air gun at 100°C). The soldering iron dormancy can be set between 10-60 minutes, and the hot air gun dormancy between 0-10 minutes.

Diagram showing the auto standby and sleep function for both the soldering iron and hot air gun.
Video demonstrating the iron dormancy feature, showing the timer countdown.
Password Protection
You can set a 3-digit password (000-999) to lock the station's settings, preventing unauthorized changes. To enable or disable password protection, navigate to the function settings (item 9) and follow the on-screen prompts.

Image illustrating the password protection feature on the display.
Video demonstrating how to access and set the password protection feature.
Function Settings (1-9)
The BK881 offers various customizable settings accessible via a menu. Use the 'Set Key' and arrow buttons to navigate and adjust these functions:
Video showing the 1-9 function settings menu on the display.
- Temperature setting for solder handle
- Temperature compensation setting for solder handle
- Auto-sleep function setting for solder handle
- Temperature setting for rework handle
- Air volume setting for rework handle
- Temperature compensation setting for rework handle
- Auto-sleep function for rework handle
- Switch over of °C & °F
- Password setting
Typical Applications
The Bakon BK881 is suitable for a wide range of electronic tasks:
- Line welding
- Main board welding and repair
- Chip maintenance (e.g., QFP, SOP, PLCC, SOJ)
- Chip dismantling and removal
- Heat shrink plastic applications
- Circuit board maintenance
- Solder wire welding

Collage of images demonstrating various applications including line welding, main board welding, chip maintenance, chip dismantling, and heat shrink plastic.

Additional images showing chip maintenance, circuit board maintenance, and solder wire welding.
Maintenance
Soldering Iron Tip Maintenance
- Cleaning: Regularly clean the soldering iron tip using the provided copper wire ball or a moistened sponge. This helps remove oxidation and ensures efficient heat transfer.
- Tinning: Always tin the tip with a small amount of solder after cleaning and before storing to prevent oxidation.
- Replacement: Replace the soldering tip when it becomes excessively worn or corroded to maintain optimal performance.
Hot Air Gun Nozzle Maintenance
- Cleaning: Ensure the nozzles are free from solder residue or debris. Clean them gently with a brush if necessary.
- Replacement: Replace nozzles if they become damaged or deformed, as this can affect airflow and heating efficiency.
General Unit Cleaning
- Ensure the unit is powered off and unplugged before cleaning.
- Wipe the exterior of the main machine and handles with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
- Keep the ventilation grilles clear of dust and obstructions to ensure proper cooling.
Troubleshooting
Common Issues and Solutions
Unit does not power on:
- Check if the power cord is securely connected to both the unit and the power outlet.
- Ensure the power switch on the back of the unit is in the 'ON' position.
- Verify the power outlet is functional.
- Check the built-in fuse (refer to the 'Smart Copper Transformer' image for fuse location).

Internal view showing the smart copper transformer and the location of the built-in fuse, designed to prevent damage from abnormal voltage.
Soldering iron/Hot air gun not heating:
- Ensure the respective tool is properly connected to the main unit.
- Check the temperature settings on the display.
- Verify that the tool is not in auto-sleep mode.
Error Code 'S-E 896' (or similar):
- This typically indicates a short circuit protection activation. Power off the unit, disconnect the affected tool, and inspect for any visible damage or short circuits in the cable or handle. Reconnect and restart. If the error persists, contact customer service.

Display showing an 'S-E 896' error, indicating short circuit protection.
Inconsistent temperature readings:
- Perform temperature compensation as described in the 'Operating Instructions' section to calibrate the device.
- Ensure the tip/nozzle is clean and properly installed.
Specifications
| Component | Parameter | Value |
|---|---|---|
| Machine | Output power | 650W (Max) |
| Input voltage | AC 110V 50Hz | |
| Dimensions | 150 × 130 × 99mm | |
| N.W./G.W. | ≈2.7Kg / ≈3.0Kg | |
| Certification | CE, FCC | |
| Rework Handle (Hot Air Gun) | Output power | 560W (Max) |
| Temperature Range | 100°C ~ 500°C | |
| Input voltage | AC 110V 50Hz | |
| Air volume | 120L/Min | |
| Solder Handle (Soldering Iron) | Output power | 90W (Max) |
| Temperature Range | 180°C ~ 480°C | |
| Input voltage | AC 28V 50Hz | |
| Resistance (tip to ground) | ≤2Ω | |
| Voltage (tip to ground) | ≤2mV |
User Tips
- Always work in a well-ventilated area to avoid inhaling solder fumes.
- Use appropriate safety gear, including safety glasses, when operating the station.
- For optimal performance and longevity, use high-quality solder and flux.
- Experiment with the shortcut keys (CH1, CH2, CH3) to quickly switch between common temperature and air volume settings for different components or tasks.
- Take advantage of the auto-sleep function to conserve energy and extend the life of your heating elements during breaks.
- Regularly check and clean the soldering iron tip and hot air gun nozzles to ensure consistent heat and airflow.
Warranty and Support
Warranty: The main machine of the Bakon BK881 is guaranteed for one year from the date of purchase. Accessories and consumables are not covered under this warranty.
Customer Service: For any problems or inquiries regarding your order or the product, please contact our customer service team. We aim to respond within 7-24 hours.
For further assistance, please refer to the contact information provided by your seller.
