BISHCVER 10D Tempered Glass Screen Protector

BISHCVER 10D Tempered Glass Screen Protector User Manual

For F+ SH65, F Plus SH60 HMS, F Plus SH60 GMS, F Plus SA55, F Plus SP65 pro, F Plus H166, P670

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BISHCVER 10D Tempered Glass Screen Protector. Designed to offer superior protection and maintain optimal screen clarity and touch sensitivity, this screen protector is compatible with various F+ and F Plus smartphone models.

Package Contents

Your package should contain the following items:

  • 4 x BISHCVER 10D Tempered Glass Screen Protectors
  • 1 x Cleaning Tool Kit (wet wipe, dry wipe, dust absorber sticker)
  • 1 x Strong Box (for safe storage and transport)
Package contents showing 4 screen protectors, a phone, and icons for features like anti-scratch, high transparency, anti-shatter, bubble-free, anti-fingerprint, and anti-oil stains.
Figure 1: Package contents and key features of the screen protector.

Setup and Installation

Follow these steps carefully for a bubble-free installation:

  1. Step 1: Clean the Smartphone Screen. Use the provided wet wipe to thoroughly clean your phone's screen, removing all dirt, dust, and smudges. Follow with the dry wipe to ensure the screen is completely dry. Use the dust absorber sticker to remove any remaining dust particles. Ensure the screen is 100% dust-free.
  2. Step 2: Position the Screen Protector. Carefully peel off the protective plastic film from the tempered glass. Align the screen protector precisely with your phone's screen, paying attention to cutouts for the camera and sensors.
  3. Step 3: Apply the Screen Protector. Once aligned, gently place the screen protector onto the screen. Press down lightly from the middle part of the screen protector, allowing the adhesive to spread outwards.
  4. Step 4: Remove Bubbles. Use your fingers or the provided tool (if any) to gently push any remaining air bubbles towards the edges of the screen. Small bubbles should disappear within 24-48 hours.
Four-step diagram showing how to install a screen protector: 1. Clean screen, 2. Peel film and paste, 3. Press middle, 4. Squeeze out bubbles.
Figure 2: Easy installation guide for the tempered glass.

Important Note: The BISHCVER screen protector is designed with a 2.5D curved edge and is 'NOT FULL COVER'. It covers the flat part of your screen only to ensure compatibility with most phone cases and provide optimal protection without lifting at the edges.

Close-up diagram showing the 2.5D curved edge of the screen protector and text indicating it is not full cover to ensure case compatibility.
Figure 3: Detail of the 2.5D curved edge and 'not full cover' design for case compatibility.

Operating Features

Your BISHCVER screen protector enhances your phone's usability and durability:

  • High Transparency: Enjoy 99% light transmittance, restoring the true quality and vibrant colors of your screen.
  • Delicate Touch: The strong silicone layer on the back ensures easy installation and tight adhesion, maintaining the original touch screen sensitivity.
  • Strong Fingerprint Protection: Designed for smooth sliding and sensitive touch, effectively preventing fingerprints and smudges.
Image of a phone screen with the protector, highlighting strong fingerprint protection for smooth and sensitive touch.
Figure 4: Strong fingerprint protection ensures a clear and responsive screen.
Image showing a screen protector with water droplets, illustrating its oleophobic coating property.
Figure 5: Oleophobic coating repels water and oil for easy cleaning.

Maintenance

To keep your screen protector in optimal condition:

  • Cleaning: The oleophobic coating prevents fingerprints and allows for easy cleaning. Simply wipe the screen with a soft, lint-free cloth to remove any smudges or dirt.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners or harsh chemicals on the screen protector, as this may damage the coating.
Image of a screen protector with a fingerprint icon, indicating its ability to prevent fingerprints.
Figure 6: The screen protector effectively prevents fingerprints.

Troubleshooting

Here are solutions to common issues you might encounter:

  • Bubbles After Installation: If small bubbles remain after installation, gently push them towards the edges with a soft cloth or card. Most small bubbles will naturally disappear within 24-48 hours as the adhesive settles.
  • White Edges/Halo Effect: If you experience white edges around the screen protector, this can sometimes be resolved using a liquid applicator (often included with screen protector kits, or a similar solution). Apply a small amount along the white edge to help the protector adhere fully.
  • Dust Under the Protector: If dust particles are trapped, carefully lift a corner of the protector with a dust-free sticker or tape, remove the dust, and reapply. This should be done in a dust-free environment.
Image showing a liquid being applied to the edge of a screen protector on a phone to fix white edges.
Figure 7: Addressing white edges with a liquid applicator.

Specifications

FeatureDescription
TypeFront Film
MaterialTempered Glass Film
Hardness9H (3 times harder than PET screen protector)
Thickness0.3mm (Extreme thin)
Edge Design2.5D Arc Edge
Transparency99% High Transmittance (HD quality)
FeaturesAnti Scratch, Anti Shatter, Bubble-free, Anti Fingerprint, Anti Oil Stains, Explosion-proof
CoatingOleophobic Coating (Nano technology processing)
AdhesionStrong Silicone Layer, Smart Adsorption Layer
CompatibilityF+ SH65, F Plus SH60 HMS, F Plus SH60 GMS, F Plus SA55, F Plus SP65 pro, F Plus H166, P670
OriginMainland China
Image showing a screen protector with text '9H HARDNESS, HIGHER DENSITY' and 'Anti scratches by knife, keys or some other hard substances'.
Figure 8: Demonstrating 9H hardness and scratch resistance.
Image showing a screen protector being hit by a metal ball, illustrating '9H Anti-shatter' property.
Figure 9: The anti-shatter feature prevents dangerous fragments.
Diagram illustrating the multi-layered structure of the screen protector, including nanostructured coating, tempered glass, explosion-proof film, silicone coating, and smart adsorption layer.
Figure 10: Multi-layered protection film structure.

User Tips

  • Install in a Clean Environment: To minimize dust, install the screen protector in a bathroom after running a hot shower for a few minutes. The steam helps settle dust particles in the air.
  • Use a Bright Light Source: A bright light can help you spot any remaining dust particles on your screen before applying the protector.
  • Take Your Time: Rushing the installation can lead to misalignment or trapped bubbles. Be patient and precise.

Warranty and Support

For any questions or support regarding your BISHCVER 10D Tempered Glass Screen Protector, please contact the BISHCVER BISHCVER Official Store directly through their official store page. They can assist with product inquiries and any issues you may encounter.

Official Store Page: BISHCVER BISHCVER Official Store

Documents - BISHCVER – 10D Tempered Glass Screen Protector

no relevant documents