1. Product Overview
The TELESIN QHM-001 is a versatile 2-in-1 accessory designed for action cameras, functioning as both an adjustable head strap and a cap clip mount. It provides a stable and comfortable solution for capturing immersive first-person perspective footage during various activities. Its quick-release design allows for easy switching between modes and compatibility with a wide range of action cameras.

2. Key Features
- 2-in-1 Functionality: Easily switch between a head strap and a cap clip mount with a quick-release structure.
- Adjustable Elastic Strap: Made from soft and durable material, the strap can be adjusted to fit various head sizes, ensuring a secure and comfortable fit.
- Durable Construction: Crafted from high-quality PC and ABS materials, designed to withstand outdoor adventures.
- Strong Grip: Features eight anti-slip silicone pads and four grooves on the cap clip for instant, secure attachment.
- Quick Release Base: Facilitates easy installation and removal of the camera mount.
- Wide Compatibility: Compatible with a broad range of action cameras, including GoPro 12/11/10/9/8/7, Action2/3, and Insta360 Pocket 2.
- First-Person Perspective: Designed for capturing immersive point-of-view footage.
- Detachable and Washable Elastic Band: Allows for easy cleaning and maintenance.
- Comfortable Touch: Enlarged skin-friendly silicone bedding on the inner lining of the cap clip enhances comfort during head contact.
3. Setup & Installation
3.1 Attaching the Camera to the Mount
The TELESIN QHM-001 features a built-in Hero 3-Prong Mount Adapter for direct attachment of compatible action cameras.

- Align your action camera's mounting fingers with the 3-prong adapter on the TELESIN mount.
- Insert the long thumb screw through the holes and tighten it securely to prevent camera movement.
3.2 Using as a Head Strap
- Ensure the cap clip mount is attached to the head strap base.
- Place the head strap on your head, with the camera mount positioned at the front.
- Adjust the elastic straps using the dual adjustment buckles on both sides to achieve a snug and comfortable fit. The wearable range is 55-65cm.
- The anti-slip rubber strip on the inside of the strap helps maintain stable positioning.


3.3 Using as a Cap Clip Mount
- To detach the cap clip from the head strap, locate the quick-release base. Insert the head strap into the slot as indicated by the arrow. Lift the arrow upward and take it out in the direction of the arrow.
- Once detached, the cap clip can be directly clipped onto the brim of a cap or other suitable thin edges.
- Ensure the cap clip is securely fastened. The eight anti-slip silicone pads and four grooves provide a strong grip.



4. Usage
The TELESIN QHM-001 allows for versatile camera placement to capture various perspectives:
- Head-mounted: Wear the head strap directly on your head for an immersive first-person perspective, ideal for activities like hiking, cycling, or vlogging.
- Cap-mounted: Clip the mount onto the brim of your cap for a slightly elevated first-person view, suitable for casual recording or when wearing headwear.
- Other surfaces: The strong grip of the cap clip allows it to be attached to other thin surfaces like backpack straps or wrist straps for unique angles.



5. Maintenance
- Cleaning the Elastic Band: The elastic band is detachable and washable. Remove it from the main mount unit and hand wash with mild soap and water. Allow it to air dry completely before reattaching.
- Cleaning the Mount: Wipe the PC and ABS components with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the headband in a cool, dry place away from direct sunlight when not in use.
- Inspection: Regularly inspect the straps, buckles, and mounting points for any signs of wear or damage. Replace if necessary to ensure secure camera attachment.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera feels loose on the mount. | Thumb screw not tightened sufficiently. | Ensure the thumb screw is fully tightened to secure the camera. |
| Head strap slips during activity. | Strap not adjusted tightly enough; anti-slip features not properly engaged. | Adjust the elastic band to a snug fit. Ensure the anti-slip rubber strip is in contact with your head/hair. |
| Cap clip does not hold securely. | Clip not fully engaged on the cap brim; surface too thick or thin. | Ensure the cap clip is fully pressed onto the cap brim. The clip is designed for standard cap brims. |
| Difficulty detaching cap clip from head strap. | Incorrect quick-release procedure. | Follow the quick-release instructions carefully: insert the head strap into the slot, then lift the arrow upward and pull in the indicated direction. |
7. User Tips
- For optimal stability, especially during high-impact activities, ensure both the head strap and the camera's mounting screw are as tight as comfortably possible.
- Experiment with different camera angles and mounting positions (head, cap, backpack) to find the most dynamic and engaging shots for your specific activity.
- When using the cap clip, consider wearing a cap with a firm brim for better stability.
- Regularly clean the elastic band, especially after sweaty activities, to maintain hygiene and prolong its lifespan.
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | QHM-001 (2in1 Headband) |
| Type | Action Camera Accessories Kits |
| Brand Name | TELESIN (also listed as Arealer in some specifications) |
| Compatible Action Camera Brand | Insta360, GoPro |
| Compatible with | GoPro 12/11/10/9/8/7, Action2/3, Insta360 Pocket 2 |
| Material | PC + ABS, Acrylic Fiber/Thai Latex Silk |
| Wearable Range (Head Circumference) | 55-65 cm |
| Size (Mount) | 12-16 cm (high), 12 cm (low) |
| Weight | 95 g |
| Origin | Mainland China |

9. Warranty & Support
This product comes with a 12-month manufacturer's limited warranty for defective items from the date of receipt. Accessories typically come with a 3-month warranty. The warranty does not cover items damaged or misused after receipt.
If you encounter any issues or have questions regarding your TELESIN QHM-001, please contact the seller or manufacturer's customer support for assistance. When reporting a defect, please provide your order number and a clear description of the issue.