1. Product Overview
The Tuya Zigbee Human Presence Detector is a smart sensor designed for advanced home automation. It comes in two main versions: an Infrared (PIR) sensing model (ZG-204ZS) and a Millimeter Wave Radar sensing model (ZG-204ZM). This device offers real-time monitoring of indoor movement, luminance detection, and can be integrated into smart home systems via the Zigbee 3.0 protocol.
Key Features:
- Simple operation and easy installation with adhesive.
- Ultra-low power consumption, powered by AAA batteries.
- Zigbee 3.0 wireless protocol for smart home integration (gateway required).
- Mobile APP real-time control and intelligent situational linkage.
- ZG-204ZM (Millimeter Wave Radar version): Upgraded radar detection for enhanced accuracy, supporting breathing, micromotion, and motion detection, capable of penetrating glass walls for broader automation scenarios.
- ZG-204ZS (Infrared sensing version): Standard PIR motion detection.
2. Package Contents
Ensure all items are present before proceeding with installation:
- 1 x Tuya Zigbee Human Presence Detector (ZG-204ZS or ZG-204ZM)
- Adhesive tape for installation
Note: LR03 AAA*2 batteries are NOT included and must be purchased separately.
3. Setup and Installation
3.1 Battery Installation
- Gently open the back cover of the detector to access the battery compartment.
- Insert two LR03 AAA batteries, ensuring correct polarity (+/-).
- Close the back cover securely.
3.2 Device Pairing (Zigbee Gateway Required)
- Ensure your Zigbee gateway is powered on and in pairing mode.
- Press and hold the reset button on the detector for approximately 5 seconds until the indicator light flashes, indicating it's in pairing mode.
- Open the Tuya Smart or Smart Life app on your mobile device and follow the on-screen instructions to add a new device.
- Once successfully paired, the indicator light will stop flashing.
3.3 Mounting the Detector
The detector can be installed on a wall or other vertical surface using the provided 3M adhesive tape. Choose a suitable location based on the desired detection area and the sensor's detection capabilities.
- Recommended Installation Height: 1.5 - 2 meters or 2 - 3 meters, depending on desired coverage.
- Detection Angles: Horizontal 105°, Vertical 105°.
- Detection Distance: Up to 5 meters.
Consider the following diagrams for optimal placement:


4. Operating Instructions
4.1 Mobile App Control
Once connected to your Zigbee gateway, the detector can be controlled and monitored via the Tuya Smart or Smart Life mobile application.
- Real-time Monitoring: View indoor movement status in real-time.
- Alarm Notifications: Receive instant notifications on your mobile phone if movement is detected, especially useful for security purposes.
- Luminance Detection: Monitor ambient light levels (0-3000 Lux).
- Intelligent Linkage: Set up automation rules to link the detector with other smart devices (e.g., turn on lights when presence is detected, adjust curtains based on luminance).

4.2 Advanced Detection (Millimeter Wave Radar Version ZG-204ZM)
For the ZG-204ZM model, the advanced millimeter wave radar offers superior detection capabilities:
- Breathing Detection: Detects subtle movements associated with breathing, indicating static human presence.
- Micromotion Detection: Identifies small movements like typing or slight shifts in posture.
- Motion Detection: Standard detection of larger movements.
- Through-Glass Detection: The radar can detect presence even through glass walls, expanding placement options and use cases.


5. Maintenance
5.1 Battery Replacement
When the battery level is low, the device may send a notification via the mobile app. Replace the two LR03 AAA batteries as described in Section 3.1.
5.2 Cleaning
Wipe the exterior of the detector with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the device. Ensure the sensor lens (PIR version) or radar area (millimeter wave version) is kept clear of dust and obstructions for optimal performance.
6. Troubleshooting
- Device not powering on: Check if the LR03 AAA batteries are inserted correctly and are not depleted. Replace if necessary.
- Device not connecting to app: Ensure your Zigbee gateway is powered on, connected to the internet, and in pairing mode. Make sure the detector is within range of the gateway. Try resetting the detector by pressing the reset button.
- Inaccurate detection: Verify that the detector is mounted at the recommended height and that its detection area is clear of obstructions. For millimeter wave radar versions, ensure no large metallic objects are directly in front of the sensor that could interfere with the radar signal.
- No notifications: Check your mobile app settings to ensure notifications are enabled for the device. Also, verify that your phone has an active internet connection.
- Compatibility issues: This device uses Zigbee 3.0 protocol. Ensure your existing smart home gateway is compatible with Zigbee 3.0 devices and the Tuya ecosystem.
7. Specifications
| Parameter | Value |
|---|---|
| Product Model | ZG-204ZS (Infrared) / ZG-204ZM (Millimeter Wave Radar) |
| Battery Type | LR03 AAA*2 (Not included) |
| Working Voltage | DC3V |
| Static Current | < 65uA |
| Light Detection Range | 0-3000 Lux |
| Wireless Protocol | Zigbee 3.0 (Gateway required) |
| Radar Frequency (ZG-204ZM) | 24G-24.25GHZ |
| Detection Angle | Horizontal 105°, Vertical 105° |
| Detection Distance | Up to 5 meters |
| Product Dimensions | 70mm x 40mm x 30mm (approx. 2.83in x 1.26in) |
| Origin | Mainland China |
| Certification | None |

8. Warranty and Support
For any technical support, warranty claims, or inquiries regarding your Tuya Zigbee Human Presence Detector, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
9. User Tips
- Gateway Compatibility: Before purchasing, confirm that your existing Zigbee gateway is compatible with Zigbee 3.0 devices and the Tuya ecosystem to ensure seamless integration.
- Advanced Detection Needs: If you require detection of subtle movements like breathing or micromotion, or need the sensor to work through glass, opt for the ZG-204ZM (millimeter wave radar) version.
- Optimal Placement: Experiment with different mounting heights and locations within the recommended range (1.5-3 meters high, 5 meters detection distance) to achieve the best coverage for your specific environment.
- Automation Potential: Leverage the intelligent linkage features in the Tuya app to create powerful automation routines, such as turning on lights when you enter a room or adjusting climate control based on occupancy.