1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your TOP-MAX Universal 12V Car Alarm System, Model M810. This system is designed to provide robust security for your vehicle against theft and intrusion.
Key Features:
- Effective Anti-theft: Activates a loud alarm upon intrusion attempts, significantly enhancing vehicle safety.
- Customized Security: Features 7 adjustable sensitivity levels to suit various environments and user preferences.
- Broad Compatibility: Designed for universal use with DC12V cars, SUVs, small vans, tricycles, and battery cars.
- Durable Design: Constructed from premium plastic, waterproof, and corrosion-resistant for long-lasting performance.
- Remote Control: Includes two exquisite and compact remote controls for arming, disarming, and vehicle location.
2. Safety & Warnings
▲ Warning: Do not attempt to install this product yourself. Wiring is crucial; incorrect wiring may prevent the vehicle from starting, burn out fuses or the BCM (Body Control Module), and pose a risk of spontaneous combustion. Professional installation is highly recommended.
The following installation instructions are for reference only. If you are unsure about any step, please consult a professional technician.
3. Package Contents
Please verify that all components are present and in good working order before beginning installation.
- 1x Main Control Unit (Siren)
- 2x Remote Controls
- 1x English User Manual (PDF available for download: User Manual PDF)
4. Product Specifications
| Parameter | Value |
|---|---|
| Product Name | Car Alarm Device |
| Model | M810 |
| Material | Plastic |
| Color | Black, Red |
| Main Unit Working Voltage | DC12±3V |
| Remote Control Working Voltage | DC12V |
| Main Unit Static Current | 10mA |
| Siren Current | 10A |
| Working Frequency | 433.92MHz |
| Remote Control Average Static Current | 0mA |
| Remote Control Battery | 6V CR2016*2 |
| Sound Level | Approximately 120 decibels (110 decibels higher than regular alarms) |
| Power Consumption | 20W (low energy consumption) |
| Remote Control Distance | Approximately 30-80m / 1181-3150 inches |
| Sensitivity | Adjustable on remote control (Level 1-7, 1=lowest, 7=highest) |
| Sound Quality | Single tone for slight collision, 6-tone cyclic for gravity collision (stops within 2 minutes) |
Note: This item does not include central door lock functions.
5. Installation Instructions
Professional installation is recommended for this product. The following steps are for reference only.
5.1. Step 1: Preparation
- Tools and Kit Check: Gather necessary tools including wire strippers, screwdrivers, a 12V-24V voltage tester, a multimeter, insulating tape, and cable ties. Verify that the anti-theft device kit (main unit, remote control, alarm horn, sensors, etc.) is complete and in good working order.
- Vehicle Condition Check: Connect the car's power supply (do not start the engine). Check battery voltage, all vehicle lights, and dashboard indicator lights (e.g., airbag, ABS) to ensure they are normal. This confirms the vehicle's original electrical circuit is fault-free.
- Key Information Confirmation: Determine if the vehicle has a central locking system and its triggering method (positive, negative, or positive-negative). This is crucial for correct wiring. If unsure, consult the vehicle's repair manual or a professional technician.
5.2. Step 2: Disassembly and Wiring Inspection
Careful disassembly and meticulous wiring inspection are fundamental to ensuring installation quality.
- Removing Trim Panels: Carefully remove interior trim panels near the driver's seat (e.g., door sill trim, dashboard panel). Handle with care to avoid damage.
- Disconnecting Power: Always disconnect the negative terminal (ground) of the car battery before connecting any wires.
- Locating Target Wiring: Refer to your vehicle's wiring diagram to locate the following wires, typically found below the driver's side dashboard or near the center console:
- +12V Constant Power Wire: Directly powered by the battery, not controlled by the key.
- ACC/ON Wire: Powered when the key is turned to the "ACC" or "ON" position.
- Turn Signal Wire: Positive wire for the left and right turn signals.
- Door Switch Wire: Grounded or outputs 12V when the door is opened, used to trigger the alarm.
- Brake Light Wire: Powered when the brake is applied, used to enable automatic door locking.
5.3. Step 3: Core Wiring
This is the most crucial step, requiring meticulous attention to detail to ensure every wire is connected correctly and securely.
- Power and Ground: Connect the alarm's power wire (usually red) to the +12V constant power line. Connect the ground wire (usually black) to a metal part of the vehicle body (e.g., original vehicle's ground screw), ensuring a good ground connection.
- Central Locking Wiring: Based on the triggering method confirmed in Step 1, connect the alarm's central locking output wire (e.g., white, yellow, yellow-black, colors vary by brand) to the original vehicle's central locking signal wire. This is key to remote locking/unlocking.
- Fuel/Power Cut-off Wiring (Anti-theft Function): This step involves the starting or fuel system and carries a higher risk. Accurately locate the starter wire, ignition wire, or fuel pump wire, disconnect one of them, and then connect the alarm's "power-off relay" in series. Note: Incorrect connection may prevent the vehicle from starting. If unsure, omit this function or seek professional assistance.
- Other Signal Wires:
- Turn Signal Wire: After connection, the turn signals will flash as a warning when the vehicle is armed/disarmed via remote control.
- Door Edge Wire: After connection, the horn will sound an alarm if the door is not properly closed before locking the car.
- Brake Wire: After connection, it enables automatic door locking when the brake is applied after driving.
- Horn Wire: Connect to the positive and negative terminals of the horn.
5.4. Step 4: Main Unit Installation and Wiring Arrangement
- Wiring Specifications: When stripping wires, remove approximately 1 cm of outer insulation. Twist wires tightly, preferably solder them, and then wrap with high-quality insulating tape to prevent short circuits.
- Securing the Main Unit: Choose a dry, concealed location away from high temperatures and moving parts (e.g., inside the dashboard or behind the glove box). Securely fix the main unit with double-sided tape or cable ties.
- Wiring Arrangement: Organize the connected wiring harness with cable ties, keeping it away from sharp edges and moving parts (e.g., accelerator and brake pedal linkages) to ensure wiring is concealed and safe.
- Sensor Installation:
- Vibration Sensor: Securely attach or fix to the vehicle body (e.g., firewall, inside A-pillar) for sensitive vibration detection.
- LED Indicator Lights: Affix to easily visible locations (e.g., corner of the dashboard) to serve as a deterrent.
6. Operation
The alarm system is operated using the provided remote controls.
6.1. Basic Functions
- Fortification (Arming): Press the lock button on the remote control. The alarm will beep once, indicating it has entered the alert state.
- Disalarm (Disarming): Press the unlock button on the remote control. The alarm will beep twice, indicating it has been disarmed.
- Alarm Status: A slight vibration will trigger a 5-second call. If shaken again, a 30-second, 6-tone alarm cycle will activate. The alarm stops within 2 minutes.
- Discovering a Vehicle: Use the remote control to locate your vehicle. Note that the directional lights will not flash with this function.
6.2. Sensitivity Adjustment
The alarm system features 7 levels of sensitivity, adjustable via the remote control. Level 1 is the lowest sensitivity, and Level 7 is the highest. Adjust according to your environment and desired level of responsiveness.
7. Maintenance
- Regular Checks: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Remote Control Batteries: Replace remote control batteries (CR2016*2) as needed to ensure reliable operation.
- Cleaning: Keep the main unit and remote controls clean and dry. Avoid exposing them to extreme temperatures or moisture.
- Professional Inspection: Consider having the system professionally inspected annually to ensure optimal performance and security.
8. Troubleshooting & Functional Testing
After installation, comprehensive testing is crucial to ensure proper functionality.
8.1. Functional Testing Steps
- Restore Power: After confirming all wiring is properly connected and insulated, reconnect the negative terminal of the battery.
- Remote Control Function Test: Test the remote control's locking, unlocking, and vehicle location functions for responsiveness.
- Alarm Function Test: After arming the system, forcefully tap the vehicle body or pull a door to check if the horn sounds and the turn signals flash.
- Interference Test: Check for any unexplained (false) alarms.
- Vehicle Start Test: Confirm the vehicle starts normally and without any abnormalities after starting.
8.2. Interior Restoration
After confirming all functions are normal, restore all previously removed interior panels and check for any missing screws or tools.
9. User Tips
- Remote Control Programming: While sensitivity is adjustable via the remote, specific remote control programming (e.g., pairing a new remote) may require consulting the full user manual or professional assistance if not detailed in this guide.
- Battery Health: Ensure your vehicle's battery is in good condition, as the alarm system relies on a stable 12V power supply.
- Wiring Verification: Double-check all wiring connections, especially power and ground, to prevent intermittent issues or system failures.
10. Frequently Asked Questions
- Q: How do I program the remote control?
- A: This manual details sensitivity adjustment. For programming new remote controls or advanced functions, please refer to the comprehensive user manual (PDF link provided in Section 3) or seek professional installation and programming services.
11. Manufacturer & Support Information
For technical support or inquiries, please contact the manufacturer or authorized representative:
Manufacturer:
Guangzhou Kuxiong Shi Trading Co., Ltd
No. 503, Building 3, Courtyard 2, Zhongquantang Road, Industrial Avenue, Haizhu District,
Guangzhou City
Phone: 86-18814180059
Email: tingting26181@outlook.com
EU Authorized Representative:
Sea&Mew Consulting GmbH
Mittenhuber Straße 4, 92318 Neumarkt
Phone: +4915224685061
Email: Compliance.EU@outlook.com