Lemorele TC100

Contents

Lemorele TC100 13-in-1 USB-C Multiport Adapter

Model: TC100 | Brand: Lemorele

Introduction

The Lemorele TC100 is a versatile 13-in-1 USB-C Multiport Adapter designed to expand the connectivity of your USB-C enabled devices such as MacBooks, iPads, and other laptops. It provides a comprehensive solution for connecting multiple peripherals, external displays, and network access through a single USB-C port.

Lemorele TC100 13-in-1 USB-C Multiport Adapter with various ports and connected devices

The Lemorele TC100 hub showcasing its 13 ports and connectivity options.

Product demonstration video highlighting the features and usage of the Lemorele TC100.

Product Features & Interface

The Lemorele TC100 offers a comprehensive set of ports for enhanced productivity:

  • Ethernet Interface: RJ45 (Gigabit Ethernet, up to 1000Mbps)
  • Screen Interfaces:
    • 2 x HDMI (4K@30Hz)
    • 1 x VGA (1080P@60Hz)
    • Note: When both HDMI ports are used simultaneously, the output resolution is limited to 1080P. When only one HDMI port is used, 4K resolution is supported.
  • USB Ports:
    • 2 x USB-A 3.0 (5Gbps High Speed Data Transfer)
    • 2 x USB-A 2.0
    • 1 x USB-C 3.0
  • Memory Card Interface: SD Card Slot + TF Card Slot (supports simultaneous operation)
  • Power Connector: USB-C Power Delivery (PD) 100W (for charging host device only)
  • Audio Interface: 3.5mm Audio Jack (supports audio output only)
Diagram showing all 13 ports of the Lemorele TC100 hub

Detailed view of the Lemorele TC100's various input and output ports.

Setup Instructions

  1. Connect to Host Device: Plug the integrated USB-C cable of the Lemorele TC100 into a compatible USB-C port on your laptop, tablet, or smartphone. Ensure your device's USB-C port supports DisplayPort Alternate Mode (Alt Mode) for video output and Power Delivery for charging.
  2. Power Connection (Optional): For optimal performance and to charge your host device, connect a USB-C power adapter (up to 100W) to the USB-C PD port on the hub.
  3. Connect Peripherals:
    • External Displays: Connect your monitors to the HDMI and/or VGA ports using appropriate cables.
    • Network: Plug an Ethernet cable into the RJ45 port for a stable wired network connection.
    • USB Devices: Connect USB flash drives, external hard drives, keyboards, mice, or other USB peripherals to the USB-A 3.0, USB-A 2.0, or USB-C 3.0 ports.
    • Memory Cards: Insert SD and/or TF cards into their respective slots.
    • Audio: Connect headphones or speakers to the 3.5mm audio jack for sound output.
Laptop connected to the hub with an Ethernet cable for stable wired network

Connecting the hub to a laptop for a stable Gigabit Ethernet connection.

Laptop connected to the hub, which is then connected to a 100W power adapter

Utilizing the 100W Power Delivery feature to charge the host device.

Operating Instructions

Display Output

The TC100 supports both mirror and extended display modes, with specific behaviors depending on your operating system:

Windows Systems:

  • Mirror Mode (A to A+A+A): All connected external displays will mirror the content of your primary screen.
  • Extended Mode (A to B+B+C): Your primary screen (A) can be extended across two additional unique displays (B and C). The VGA output will mirror one of the HDMI outputs in extended mode.
  • Resolution Note: When using two HDMI ports simultaneously, the maximum resolution for both will be 1080P. If only one HDMI port is used, it can support up to 4K resolution.
Diagram illustrating Windows display modes: Mirror (A to A+A+A) and Extended (A to B+B+C)

Visual representation of multi-monitor configurations for Windows operating systems.

Mac Systems:

  • Mirror Mode (A to A+A+A): All connected external displays will mirror the content of your primary screen.
  • Extended Mode (A to B+B+B): All three external screens will display the same content, which is an extension of your primary screen.
  • Resolution Note: All three screens can support 4K resolution in both duplicate and extended modes.
Diagram illustrating Mac OS display modes: Mirror (A to A+A+A) and Extended (A to B+B+B)

Visual representation of multi-monitor configurations for Mac operating systems.

Data Transfer

  • USB 3.0 Ports: Utilize the blue USB-A 3.0 ports for high-speed data transfer up to 5Gbps, ideal for large files and fast syncing.
  • USB 2.0 Ports: The USB-A 2.0 ports are suitable for connecting standard peripherals like keyboards, mice, and printers.
  • SD/TF Card Slots: Insert your SD and TF cards to read and write data simultaneously.
Graphic showing 5Gbps high-speed data transfer, 10X faster than USB 2.0

Comparison of data transfer speeds, highlighting the 5Gbps capability of USB 3.0.

MacBook Pro connected to the hub, with SD and TF cards inserted for simultaneous reading and writing

Demonstration of simultaneous SD and TF card reading and writing.

Network Connectivity

Connect an Ethernet cable to the RJ45 port for a stable and fast wired internet connection, supporting speeds up to 1000Mbps (Gigabit Ethernet).

Power Delivery

The USB-C PD port supports up to 100W power delivery, allowing you to charge your host device while using the hub's other functions. This port is for power input to the hub and charging the host device only.

Maintenance

  • Keep the hub clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the hub to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
  • Disconnect the hub from your device when not in use for extended periods.

Troubleshooting

  • No Display Output / Intermittent Display:
    • Ensure your host device's USB-C port supports DisplayPort Alt Mode.
    • Check all cable connections (USB-C to hub, HDMI/VGA to monitor).
    • Try a different HDMI/VGA cable or monitor.
    • Restart your host device.
    • For Windows, if using two HDMI ports, remember the resolution is limited to 1080P.
  • No Power Delivery / Slow Charging:
    • Ensure your host device's USB-C port supports Power Delivery.
    • Verify your USB-C power adapter is functioning and provides sufficient wattage (up to 100W supported).
    • Check the connection of the power adapter to the hub's PD port.
  • USB Devices Not Recognized:
    • Ensure the hub is securely connected to your host device.
    • Try connecting the USB device to a different port on the hub.
    • If it's a high-power device, ensure the hub is connected to an external power source via the PD port.
  • SD/TF Cards Not Reading:
    • Ensure the card is inserted correctly and fully into the slot.
    • Check if the card is damaged or corrupted.
    • Try a different SD/TF card.
  • No Ethernet Connection:
    • Verify the Ethernet cable is securely connected to both the hub and your router/modem.
    • Check your network settings on your host device.
    • Ensure your router/modem is functioning correctly.

Specifications

Feature Specification
Model Number TC100
Brand Name Lemorele
Interface Type USB 3.0 (Host connection: USB-C)
Ports 13-in-1
HDMI Output 2 x HDMI (4K@30Hz single, 1080P dual)
VGA Output 1 x VGA (1080P@60Hz)
Ethernet RJ45 (1000Mbps Gigabit Ethernet)
USB-A 3.0 Ports 2 (5Gbps data transfer)
USB-A 2.0 Ports 2
USB-C 3.0 Port 1
USB-C PD Port 1 (Up to 100W Power Delivery input)
Card Reader SD & TF (simultaneous operation)
Audio Jack 3.5mm (Audio Output Only)
Dimensions (Approx.) 170mm (L) x 43.5mm (W) x 16.5mm (H)
Package Yes
Diagram showing the dimensions of the Lemorele TC100 hub

Physical dimensions of the Lemorele TC100 multiport adapter.

User Tips

  • Host Device Compatibility: Always ensure your laptop's USB-C port supports DisplayPort Alternate Mode (Alt Mode) for video output and Power Delivery for charging to utilize all hub features.
  • Optimal Display Resolution: For the best 4K display experience on Windows, use only one HDMI port at a time. When using dual HDMI, the resolution will be 1080P.
  • Multi-Display Configuration: After connecting multiple monitors, adjust your display settings in your operating system (Windows Display Settings or Mac System Preferences) to configure mirror or extended modes as desired.
  • Power for High-Drain Devices: If connecting multiple power-hungry USB devices (e.g., external hard drives), ensure the hub is connected to a power source via its USB-C PD port to provide stable power.
  • Simultaneous Card Access: The SD and TF card slots can be used simultaneously, allowing for efficient data management between different card types.

Warranty & Support

For any product-related inquiries, technical support, or warranty claims, please refer to the contact information provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.

© 2024 Lemorele. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.