1. Introduction
The UGREEN CM123 Bluetooth Receiver Adapter is designed to bring wireless audio streaming capabilities to your existing home stereo systems, amplifiers, car radios, or any audio device with 3.5mm AUX or RCA input ports. Featuring Bluetooth 5.3 technology, it provides a stable and high-quality audio connection, allowing you to enjoy music from your smartphone, tablet, or laptop without cables.
2. Package Contents
Please check the package for the following items:
- UGREEN CM123 Bluetooth Receiver Adapter
- 3.5mm Audio Cable
- RCA Audio Cable (may vary by package option)
- Micro USB Charging Cable
- User Manual

3. Product Overview
Familiarize yourself with the components and ports of your UGREEN CM123 Bluetooth Receiver Adapter.


4. Specifications
| Feature | Specification |
|---|---|
| Model Number | CM123 |
| Brand Name | UGREEN |
| Wireless Type | Bluetooth |
| Bluetooth Version | 5.3 |
| Frequency Band | 2400MHz-2483.5MHz |
| Max. RF Output Power | 4dBm (EIRP) |
| Transmission Distance | 10m/33ft (no blocking) |
| Bluetooth Profile | A2DP/AVRCP |
| Codecs | SBC/AAC |
| Frequency Response | 20Hz-20kHz |
| Audio Port | 3.5mm/2RCA |
| Charging Port | Micro USB |
| Battery Type | Polymer Lithium-ion Battery |
| Battery Capacity | 200mAh 3.7V (0.74Wh) |
| Charging Time | About 2 hours |
| Operating Time | About 8 hours |
5. Setup Instructions
Follow these steps to set up your UGREEN CM123 Bluetooth Receiver Adapter:
- Charge the Device: Connect the Micro USB charging cable to the IN-5V port on the receiver and the other end to a 5V USB power source (e.g., USB A charger, computer USB port). The LED indicator will show charging status. A full charge takes approximately 2 hours and provides about 8 hours of operating time. The device can be used while charging.
- Connect to Audio System:
- For 3.5mm AUX Input: Use the provided 3.5mm audio cable to connect the receiver's AUX port to the 3.5mm AUX input port on your stereo system, amplifier, or car radio.
- For RCA Input: Use the provided RCA audio cable to connect the receiver's L-AUDIO-R (RCA) ports to the corresponding L/R RCA input ports on your stereo system or amplifier.
- Power On: Press and hold the Multifunction Button on the receiver for 3 seconds until the LED indicator flashes, indicating it's powered on and in pairing mode.
- Pair with Your Device:
- Enable Bluetooth on your smartphone, tablet, or other audio source device.
- Search for available Bluetooth devices and select "UGREEN-XXXX" (or similar name) from the list.
- Once connected, the LED indicator will turn solid blue.


6. Operating Instructions
- Power On/Off: Press and hold the Multifunction Button for 3 seconds to power on or off the device.
- Bluetooth Pairing: After powering on, the device automatically enters pairing mode (LED flashes). If already paired, it will attempt to reconnect to the last paired device. To force pairing mode, disconnect from the current device or power cycle.
- Audio Playback: Once successfully paired, play audio from your source device. The sound will be transmitted wirelessly to the UGREEN CM123 and output through your connected stereo system.
- Controlling Playback: Use your source device to control volume, skip tracks, and pause/play. The receiver itself does not have playback controls.
- Charging While Playing: The receiver can be used continuously while connected to a 5V power source via its Micro USB port. This allows for uninterrupted music playback.

7. Maintenance
- Keep the device dry. Avoid exposure to moisture, rain, or liquids.
- Do not attempt to disassemble or modify the device.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device in a cool, dry place when not in use.
- Avoid extreme temperatures.
8. Troubleshooting
If you encounter issues with your UGREEN CM123, please refer to the following common problems and solutions:
- Device does not power on:
- Ensure the battery is charged. Connect the device to a 5V power source using the Micro USB cable.
- Verify the charging cable and power adapter are working correctly.
- Cannot pair with a Bluetooth device:
- Make sure the receiver is in pairing mode (LED indicator flashing). If it's solid blue, it's already connected to another device. Disconnect from the previous device or power cycle the receiver.
- Ensure your source device's Bluetooth is enabled and within the 10m/33ft transmission range.
- Try restarting both the receiver and your source device.
- Clear the Bluetooth pairing list on your source device and try pairing again.
- No sound or poor sound quality:
- Check that the audio cables (3.5mm or RCA) are securely connected to both the receiver and your audio system.
- Ensure your audio system is set to the correct input source (e.g., AUX, Line In).
- Adjust the volume on both your source device and your audio system.
- Make sure the receiver is not too far from the source device and there are no significant obstructions.
- Verify that the correct audio output is selected on your source device.
- Intermittent connection or disconnections:
- Reduce the distance between the receiver and your Bluetooth source device.
- Remove any obstacles (walls, large metal objects) that might interfere with the Bluetooth signal.
- Avoid placing the receiver near other wireless devices that might cause interference (e.g., Wi-Fi routers, microwaves).
9. User Tips
- Alexa Compatibility: The UGREEN CM123 can be paired with devices like Amazon Echo (Alexa) to stream audio to your home stereo system. Simply pair the receiver with your Echo device via Bluetooth settings.
- Dual Output Connectivity: You can connect both the 3.5mm AUX and RCA audio outputs simultaneously to different audio systems. However, only one output will be active at a time, depending on which input your audio system is currently using.
- Optimal Placement: For the best Bluetooth range and stability, place the receiver in an open area, away from other electronic devices that may cause interference.

10. Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. For warranty information, technical support, or any questions regarding your product, please contact UGREEN customer service through their official website or the retailer where you purchased the product. Please have your model number (CM123) and purchase details ready when contacting support.