1. Introduction
This manual provides instructions for the installation and operation of the MAMSM Car 16-pin Harness Adapter with an integrated Canbus Decoder (Model: FORD-RZ-09). This product is designed to facilitate the installation of aftermarket Android car audio and navigation systems in compatible Ford vehicles, ensuring seamless integration with the vehicle's electrical system without the need for cutting original wires.
The harness adapter and Canbus decoder are engineered to meet standard pin definitions for common public car Android solutions, featuring a 16-pin main power line interface. Each unit undergoes rigorous testing to ensure 100% electrification performance and reliability.
2. Vehicle Compatibility
This harness adapter and Canbus decoder are compatible with various Ford models. Please identify your specific vehicle model and year to ensure you have the correct harness type.
2.1. Harness Type FD-XB-09 + Canbus Decoder FORD-RZ-09
- Ford Fiesta: 2004-2014
- Ford Ecosport: 2013-2017
- Ford Focus: 2012-2017
- Ford Edge: 2015-2018
- Ford Taurus: 2015-2018
- Ford Mondeo Fusion: 2013-2016
- Ford Kuga Escape: 2013-2016
- Ford Transit Tourneo Custom: 2016-2020
- Ford Ranger: 2011-2016
- Ford Transit Custom: 2014-2017
2.2. Harness Type FD-XB-06 + Canbus Decoder FORD-RZ-09
- Ford Ecosport: 2017-2019
- Ford Ranger: 2015-2020
The CANbus box brand is Raise (RZC), and the specific model is FORD-RZ-09.
3. Product Components
The product package typically includes the following components:
- 16-pin Main Power Harness Adapter (FD-XB-09 or FD-XB-06, depending on vehicle compatibility)
- Raise (RZC) CANbus Decoder Box (P/N: FORD-RZ-09)
- RCA Connectors for AV-Out (if applicable to the specific harness variant)
Figure 1: Overall view of the harness and Canbus box (FORD-RZ-09).
Figure 2: Detailed view of the harness with labeled connectors and the FORD-RZ-09 Canbus box.
Figure 3: Close-up of the Raise (RZC) FORD-RZ-09 Canbus Decoder box.
4. Installation and Setup
The installation process is designed to be plug-and-play, requiring no cutting of original vehicle wires. However, professional installation or guidance from experienced individuals is highly recommended due to the complexity of vehicle electronics.
4.1. Pre-Installation Checklist
- Ensure your vehicle is turned off and the battery is disconnected before starting installation.
- Verify that your aftermarket Android head unit is compatible with standard 16-pin power interfaces and supports CANbus protocol decoding.
- Confirm the correct harness type (FD-XB-09 or FD-XB-06) for your specific Ford model and year.
4.2. Wiring Connection Steps
- Carefully remove your existing car audio unit according to your vehicle's service manual.
- Connect the 16-pin harness adapter to the corresponding port on your new Android head unit.
- Connect the vehicle-specific end of the harness adapter to the original wiring harness in your car.
- Ensure the FORD-RZ-09 Canbus decoder box is securely connected within the harness assembly.
- Connect any additional RCA cables (e.g., for AV-Out, reverse camera input) as required by your Android head unit and accessories.
- Double-check all connections for secure fitment.
4.3. 16-pin Harness Pinout Diagram
Refer to the following diagram for the standard pin definitions of the 16-pin harness connector:
Figure 4: Wiring Definition Diagram for the 16-pin harness connector.
| Pin No. | Function |
|---|---|
| A1 | GND (Ground) |
| A2 | BATT (Battery +12V Constant) |
| A3 | (Unused/Specific Function) |
| A4 | ILL (Illumination / Small Lights Detecting) |
| A5 | Reverse Detecting Line |
| A6 | KEY2 (Steering Wheel Control 2) |
| A7 | KEY1 (Steering Wheel Control 1) |
| A8 | ANT Power (Antenna Power Output) |
| A9 | Speaker Front Right FR- |
| A10 | Speaker Rear Left RL- |
| A11 | Speaker Front Right FR+ |
| A12 | Speaker Rear Left RL+ |
| A13 | Speaker Front Left FL+ |
| A14 | Speaker Rear Right RR+ |
| A15 | Speaker Front Left FL- |
| A16 | Speaker Rear Right RR- |
5. Operating the Canbus Decoder
After physical installation, the Canbus decoder requires configuration within your Android head unit's software to function correctly.
- Power on your Android head unit.
- Navigate to the factory settings or car settings menu on your Android host. This menu is often password-protected; consult your head unit's manual for access.
- Locate the 'Car Bus Configuration' or 'CANbus Settings' menu.
- Select the corresponding CANbus brand, which is Raise (RZC).
- Select the appropriate CANbus model, which is FORD-RZ-09.
- It is highly recommended to connect your Android head unit to the internet via Wi-Fi and update the latest MCU (Microcontroller Unit) and configuration files for optimal performance and compatibility.
- Test all functions, including steering wheel controls, reverse camera, and illumination, to ensure proper operation.
This decoder is designed for use with Android hosts utilizing mainstream solutions such as Topway, xyauto, nowada, and ftytek. Compatibility with other solution providers may vary, and specific instructions will be provided if applicable.
6. Specifications
| Feature | Specification |
|---|---|
| Item Type | Cables, Adapters & Sockets |
| Item Weight | 0.5 kg |
| Voltage | 12 V |
| Interface | AV-Out (and 16-pin main power) |
| Origin | Mainland China |
| CANbus Box Brand | Raise (RZC) |
| CANbus Box Model | FORD-RZ-09 |
7. Troubleshooting
- No Power to Head Unit: Double-check all 16-pin connections. Ensure the vehicle battery is properly reconnected. Verify the head unit's fuse.
- Steering Wheel Controls Not Working: Ensure the CANbus decoder is correctly configured in the Android head unit's settings (Raise RZC, FORD-RZ-09). Update MCU and configuration files if available.
- Incorrect Vehicle Information Displayed: Re-verify CANbus settings in the Android head unit. Ensure the correct vehicle model and year are selected if such options exist in the head unit's software.
- Compatibility Issues: If experiencing issues, first confirm that your specific Ford model and year are listed in the compatibility section for the correct harness type. Some older Ford models (e.g., Ford Fusion 2010) or specific trims might not be supported.
- General Malfunction: If issues persist, consider consulting a professional installer or the manufacturer of your Android head unit for further assistance.
8. User Tips
- Verify Compatibility: Always confirm the harness and Canbus decoder are suitable for your exact Ford model and year before purchase and installation. Check the compatibility list carefully.
- Android Head Unit Compatibility: For best results, use Android head units that support mainstream solutions like Topway, xyauto, nowada, or ftytek.
- CANbus Configuration: After installation, remember to enter your Android head unit's factory settings and select 'Raise (RZC)' as the CANbus brand and 'FORD-RZ-09' as the model in the car bus configuration menu.
- Software Updates: Connect your Android head unit to Wi-Fi and update its MCU and configuration files to ensure the latest software and optimal performance for the Canbus decoder.
- Professional Assistance: If you are not experienced with car electronics, it is highly recommended to seek guidance from a professional installer to avoid potential damage.
9. Warranty and Support
For specific warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Ensure you retain your proof of purchase for any warranty claims.