MEKEDE Optical Fiber Decoder Most Box

Contents

MEKEDE Optical Fiber Decoder Box

Model: Optical Fiber Decoder Most Box (CAN-BEZ-W211-10Y)

Digital Data Optical Fiber Decoder Most Box Car Radio Amplifier Adapter

1. Introduction

The MEKEDE Optical Fiber Decoder Box is designed to integrate aftermarket head units with the existing optical fiber audio system in compatible Mercedes Benz vehicles. This adapter converts digital optical signals to analog audio (AV-Out) for seamless connection to your new car radio amplifier, ensuring high-quality audio output.

2. Product Overview

This decoder box acts as an interface for vehicles equipped with a MOST (Media Oriented Systems Transport) optical fiber audio system. It allows you to replace your factory head unit while retaining the functionality of your car's amplifier and speakers.

MEKEDE Optical Fiber Decoder Box for Mercedes Benz W211 W219 W220
Figure 1: MEKEDE Optical Fiber Decoder Box with wiring for Mercedes Benz W211, W219, W220.
Close-up of the decoder box label
Figure 2: Decoder box label showing compatible models, hardware (HW:V3.0), and software (SW:V1.8) versions.

3. Specifications

Feature Detail
Brand Name MEKEDE
Item Type Cables, Adapters & Sockets
Voltage 12 V
Interface AV-Out
Hardware Version V3.0
Software Version V1.8
Model Number LZ230700023TY1944
Package Dimensions (L x W x H) 17 cm x 16 cm x 2 cm
Package Weight 0.09 kg

4. Compatibility

This Optical Fiber Decoder Box is compatible with the following Mercedes Benz models that utilize an optical fiber audio signal (MOST system):

  • SLK Class (2009-2012)
  • CLS/SL/SLK Class (2005-2008)
  • E-Class W211 W219 (2003-2008)
  • CL/S Class W220 (2004-2006)

Important Note: This product is specifically designed for vehicles equipped with an optical fiber audio system. Please verify your car's audio system type before installation.

5. Setup & Installation

Follow these steps for proper installation of the Optical Fiber Decoder Box:

5.1 Identify Connections

Top view of decoder box showing Fiber-Optic Interface and Power Socket
Figure 3: Top view of the decoder box, highlighting the Fiber-Optic Interface and Power Socket.

Locate the Fiber-Optic Interface and Power Socket on the decoder box as shown in Figure 3.

5.2 Wiring Diagram

Wiring diagram for MEKEDE Optical Fiber Decoder Box
Figure 4: Detailed wiring connections for the decoder box.

5.3 Connection Steps

  1. Power Connection: Connect the B+ cable (yellow wire, labeled '1' in Figure 4) from the decoder box to the positive pole of your car's power supply.
  2. Ground Connection: Connect the GND cable (black wire, labeled '2' in Figure 4) from the decoder box to the car's ground cable.
  3. Audio Output: Connect the AUX-RIN (red RCA, labeled '3' in Figure 4) and AUX-LIN (white RCA, labeled '4' in Figure 4) cables to the Front Right and Front Left AUX audio input ports of your aftermarket head unit, respectively.
  4. Optical Fiber Connection: Insert the vehicle's optical fiber cable into the Fiber-Optic Interface on the decoder box.

Ensure all connections are secure to prevent signal loss or damage.

6. Operation

Once properly installed, the MEKEDE Optical Fiber Decoder Box operates automatically. It will convert the digital optical audio signal from your car's existing amplifier system into an analog signal that your aftermarket head unit can process via its AUX input. Select the AUX input on your head unit to receive audio from the car's amplifier system.

7. Troubleshooting

  • No Audio Output:
    • Check all power (B+ and GND) and audio (AUX-RIN, AUX-LIN) connections for proper seating and continuity.
    • Ensure the optical fiber cable is correctly inserted into the decoder box.
    • Verify that your aftermarket head unit is set to the correct AUX input source.
    • Confirm that your vehicle's original amplifier system is functioning correctly.
  • Distorted Audio:
    • Check for loose or corroded connections.
    • Ensure the audio cables are not routed near power cables that could cause interference.
    • Verify the volume levels on both the head unit and the car's amplifier are appropriately set.
  • Compatibility Issues:
    • Double-check that your car model and year are listed in the compatibility section.
    • Confirm your vehicle uses an optical fiber audio system. This decoder is not for standard analog systems.

8. User Tips

  • Bose Speaker Systems: Some users with Bose speaker systems in compatible Mercedes models (e.g., 2005 Mercedes SL500) have successfully used this decoder. However, due to variations in car audio configurations, it is recommended to confirm compatibility with your specific Bose system or consult a professional installer if you encounter issues.
  • Professional Installation: If you are unsure about any wiring or installation steps, it is highly recommended to seek assistance from a qualified car audio technician to avoid damage to your vehicle's electrical system or the decoder box.

9. Maintenance

The MEKEDE Optical Fiber Decoder Box requires minimal maintenance. Ensure it is installed in a dry, stable location away from extreme temperatures and direct moisture. Periodically check connections for tightness and cleanliness to maintain optimal performance.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please contact your retailer or the MEKEDE customer service department. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.