1. Introduction
The Maono ProStudio PS22 streaming audio interface is a versatile solution designed for high-quality audio recording and seamless connection to a wide range of equipment. It features premium preamps with up to 60dB of gain range, a 24-bit/192 kHz sample rate, and a 2-in/2-out configuration, delivering studio-level sound for your audio and music production needs.
Unlike traditional audio interfaces, the PS22 supports smartphone connectivity via either USB-C or a 3.5mm TRRS connection. Whether you're a musician, podcaster, streamer, or content creator, the PS22 is engineered to elevate your audio production.
Video: Overview of the MAONO PS22 USB Audio Interface features and connectivity.
2. Package Contents
Please check the box for the following items:
- 1 x MAONO PS22 Audio Interface
- 1 x USB-A to USB-C Cable
- 1 x USB-C to USB-C Cable
- 1 x User Manual (this document)
For a better user experience, please download the latest instructions and read the user manual before setting up. A PDF version of the user manual is available at: MAONO PS22 User Manual PDF
3. Product Overview
3.1 Front Panel
Figure 1: Front Panel of the PS22 Audio Interface
- HI-Z Switch: Engages high-impedance mode for instruments like electric guitars.
- MIC1/INST1 & MIC2/INST2 Inputs: Combo XLR/TRS jacks for connecting microphones or instruments.
- GAIN1 & GAIN2 Knobs: Adjust input gain for MIC1/INST1 and MIC2/INST2 respectively (up to 60dB).
- 48V Phantom Power Switches: Activates +48V phantom power for condenser microphones.
- PEAK Indicators: Lights up when the input signal is too high, indicating potential clipping.
- STEREO/MONO Switch: Toggles monitoring mode between stereo and mono.
- INPUT/DAW MIX Knob: Blends the direct input signal with the playback from your computer/DAW for monitoring.
- PHONES Output: 3.5mm stereo jack for connecting headphones.
- OUTPUT Knob: Controls the overall output volume to your headphones and main monitors.
3.2 Rear Panel
Figure 2: Rear Panel of the PS22 Audio Interface
- POWER Switch: Main power on/off switch for the device.
- DC=5V Power Input: For external 5V DC power supply (adapter not included).
- POWER SOURCE USB-C Port: Connects to a power source for the interface.
- USB-C Port: Connects to your computer for data and power.
- /IOS Port: Connects to iOS devices (smartphones/tablets) for data and power.
- OUT (3.5mm) Port: 3.5mm TRRS output for connecting to smartphones or other devices.
- MAIN OUTPUT (R, L): RCA outputs for connecting to studio monitors or speakers.
4. Setup
4.1 Powering the Device
The PS22 can be powered via USB-C from your computer or smartphone, or via an external 5V DC power supply (not included) connected to the DC=5V port. Ensure the POWER switch on the rear panel is in the 'OFF' position before connecting power, then switch it 'ON' to power up the device.
4.2 Connecting to a Computer or Smartphone
Use the provided USB-C to USB-C cable to connect the PS22 to your computer or smartphone. For computers, use the USB-C port. For smartphones, use the /IOS port. The PS22 also features a 3.5mm TRRS output for smartphone connectivity.
Figure 3: Connectivity options for PC and smartphone.
4.3 Driver Installation (Windows)
While basic drivers may install automatically, for full functionality and optimal performance on Windows systems, the MAONO ProStudio driver must be downloaded and installed. This driver enables ASIO support for low-latency performance. Please visit the official MAONO website to download the latest ProStudio driver for your Windows operating system. Note that Windows 11 is recommended for full functionality, and drivers for older Windows versions (e.g., Windows 8, 8.1, 10) may not be available or fully supported.
4.4 Connecting Microphones and Instruments
- Microphones: Connect your microphone to the MIC1/INST1 or MIC2/INST2 combo jacks using an XLR cable. If using a condenser microphone, activate the corresponding 48V phantom power switch.
- Instruments: Connect instruments like guitars or basses to the MIC1/INST1 or MIC2/INST2 combo jacks using a 1/4-inch TS cable. Engage the HI-Z switch for high-impedance instruments to ensure proper signal capture.
Figure 4: Connecting microphones to the PS22.
4.5 Connecting Headphones and Monitors
- Headphones: Connect your headphones to the PHONES 3.5mm stereo jack on the front panel.
- Studio Monitors: Connect your studio monitors or speakers to the MAIN OUTPUT (R, L) RCA jacks on the rear panel.
5. Operating Instructions
5.1 Adjusting Input Gain
Use the GAIN1 and GAIN2 knobs to set the input level for your microphones or instruments. Observe the PEAK indicators; if they light up frequently or stay lit, reduce the gain to prevent clipping and distortion.
5.2 Monitoring Your Audio
The INPUT/DAW MIX knob allows you to blend the direct input signal (from your microphones/instruments) with the playback from your computer/DAW. Turn the knob towards 'INPUT' to hear more of your live input, and towards 'DAW' to hear more of your computer's audio. The STEREO/MONO switch allows you to monitor your inputs in either stereo or summed mono.
5.3 Adjusting Output Volume
The large OUTPUT knob controls the overall volume for both your headphones and the MAIN OUTPUTs. Adjust this to a comfortable listening level.
5.4 Software Control (Maono Routing Center & ProControl)
The MAONO ProStudio routing software, including Maono Routing Center and Maono ProControl, provides advanced control over your audio interface. This software allows for multi-channel input/output routing (up to 6 virtual channels), ASIO settings for ultra-low latency, and fine-tuning of various parameters. Ensure the ProStudio driver is installed on your Windows system to utilize these features.
Figure 5: Maono Routing Center and ProControl Software Interface.
6. User Tips
- Initial Setup: Always ensure the main POWER switch on the rear panel is turned ON after connecting all cables and before expecting the device to function.
- Learning Curve: The PS22 offers extensive options for sound adjustment. Take some time to explore all settings within the hardware and the Maono ProStudio software to fine-tune your audio.
- Latency: While the PS22 is suitable for home studio use, for critical low-latency applications, ensure you have the dedicated ASIO drivers installed and configured correctly in your Digital Audio Workstation (DAW).
- Windows Compatibility: For full functionality, especially with the ProStudio software, Windows 11 is recommended. Check the official MAONO website for driver availability for other Windows versions.
- Smartphone Connectivity: The dual USB-C ports and 3.5mm TRRS output provide flexible options for connecting to various mobile devices.
7. Troubleshooting
- No Sound Output:
- Ensure the PS22 is powered on (check the POWER switch on the rear).
- Verify all cables are securely connected.
- Check the GAIN knobs for your inputs and the main OUTPUT knob are turned up.
- Adjust the INPUT/DAW MIX knob to ensure you are monitoring the correct source.
- Confirm your computer's sound settings are routing audio through the PS22.
- Distortion or Clipping:
- If the PEAK indicator lights up, reduce the corresponding GAIN knob.
- If using a high-output microphone or instrument, consider using an inline pad if available.
- High Latency:
- Ensure the MAONO ProStudio ASIO driver is installed and selected in your DAW's audio settings.
- Adjust the ASIO buffer size in the Maono ProControl software (lower buffer size reduces latency but requires more CPU).
- Device Not Recognized by Computer:
- Check the USB-C cable connection. Try a different USB port or cable.
- Ensure the PS22 is powered on.
- Reinstall the MAONO ProStudio driver.
- Verify operating system compatibility (Windows 11 is recommended for full functionality).
- Input Signal Clips at Low Gain:
- If strong signals cause clipping even with low gain settings, try reducing the output level of your source device (e.g., instrument volume).
8. Specifications
| Feature | Description |
|---|---|
| Model Number | PS22 |
| Type | Mixers |
| Brand Name | MAONO |
| Connectivity Technology | USB, AUX, XLR |
| Sampling Rate | 24bit/192kHz |
| Premium Mic Preamps | 60dB of gain range |
| Multi-Channel Input/Output | 2 input and 2 output ports, 6 virtual channels through MAONO ProStudio routing software |
| Compatible Devices | Laptop, Headphone, Guitar, Bass, Microphone, Smartphone |
| Supported Software | Avid Pro Tools, Ableton Live, Steinberg Cubase, Studio One, Logic Pro, Nuendo, Reaper, Audacity, Adobe Audition |
| Software Support | Maono Routing Center and ProControl Pane |
| Features | Dual USB-C Connectivity, 2-in/2-out with two combo XLR/Instrument/Line-In inputs, 3.5mm Output, Pass-thru charging for select mobile devices, Advanced Routing software, Monitor Mix with Mono/Stereo Switch, All metal chassis, One-touch power switch for circuit protection |
| Applications | Vocal and instrument recording, podcasting, streaming |
| Frequency Response | 20Hz - 20kHz (typical for audio interfaces, based on 20 KHz mention) |
| Power Source | USB-C (5V DC) or external 5V DC adapter (not included) |
| Guitar Connection | Supported (via HI-Z inputs) |
| Dimensions (L x W x H) | 19 cm x 18 cm x 7 cm (approximate, based on package dimensions) |
| Weight | 0.93 kg (approximate, based on package weight) |
Figure 6: Technical Specifications Overview.
9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the device to strong impacts.
- Cable Care: Ensure cables are not bent sharply or placed under heavy objects to prevent damage.
10. Warranty and Support
MAONO offers comprehensive support for its products:
- Product Replacement: 365 Days Replacement policy.
- Technical Support: Lifetime technical support is provided.
- Customer Service: 7/24H Customer Support is available.
- Debugging Assistance: One-to-one debugging assistance by professional staff.
For support inquiries, please contact MAONO customer service through their official channels.
11. Certifications
The MAONO PS22 Audio Interface complies with the following standards:
- CE
- FCC
- RoHS
- WEEE