KuWFi CPE130/CPE131

Contents

KuWFi 300Mbps Outdoor CPE Bridge User Manual

Model: CPE130/CPE131

Brand: KuWFi

1. Introduction

The KuWFi 300Mbps Outdoor CPE Bridge (Models CPE130/CPE131) is a 2.4GHz wireless device designed for long-range outdoor Wi-Fi access and network extension. It supports point-to-point (PTP) and point-to-multipoint (PTMP) connections, offering robust compatibility, strong anti-interference capabilities, and effective performance even in environments with adjacent channel interference. This device is ideal for extending network coverage, connecting remote IP cameras, or bridging networks between buildings.

Key features include 2.4GHz 300Mbps Wi-Fi, built-in 8dBi panel antennas, up to 1KM transmission distance, 24V Power over Ethernet (PoE) support, and an IP65-rated waterproof and lightning-proof design for outdoor use.

Video: KuWFi Outdoor CPE Bridge Product Overview

2. Package Contents

Please verify that all items are present in your package:

  • 1 or 2 x KuWFi CPE Bridge Units (depending on purchase)
  • 1 or 2 x Ethernet Cables
  • 1 or 2 x POE Power Supplies
  • 1 x Quick Start Guide
KuWFi CPE Bridge package contents including two CPE units, two PoE adapters, two Ethernet cables, zip ties, and manuals.

Image: Package Contents

3. Specifications

FeatureSpecification
ChipsetMT7628DAN
Memory64MB RAM
Flash8MB
Wireless Standard802.11b/g/n
Frequency2.4GHz to 2.484GHz
Data Rate300Mbps
WAN/POE Port1 x 10/100Mbps RJ45
LAN Port1 x 10/100Mbps RJ45
Antenna8dBi Panel Antenna (V: 60°, L: 33°)
Waterproof LevelIP65
Size168mm x 88mm x 57.6mm
Power SupplyPOE 24V/0.5A
Working Temperature-30°C ~ 55°C
Storage Temperature-40°C ~ 70°C
Humidity5%~95% (typical)

4. Setup

4.1 Physical Overview and Connections

Familiarize yourself with the ports and indicators on the CPE Bridge:

Diagram showing the dimensions of the CPE unit and a close-up of its ports and buttons: F (Function), S (Select), PWR, LAN, WAN, RST (Reset).

Image: CPE Bridge Dimensions and Interface Details

  • WAN/POE Port: Connects to the PoE injector for power and network uplink.
  • LAN Port: Connects to other network devices (e.g., camera, NVR, switch).
  • RST (Reset) Button: Used for one-click pairing or factory reset.
  • F (Function) Button: Used to cycle through LED display modes.
  • S (Select) Button: Used to select options on the LED display.
  • LED Indicators: PWR (Power), WAN, LAN, Wi-Fi (indicate status).

4.2 Master/Slave Configuration

For a wireless bridge setup, one CPE unit must be configured as a Master and the other(s) as Slave(s).

  1. Set the Switch: Locate the physical switch on the CPE unit. Set it to 'H' for Master mode or 'C' for Slave mode.
  2. Confirm Master/Slave Role: After setting the switch, press the 'F' button to make the 'H' or 'C' indicator blink on the LED display. Then, press the 'S' button to confirm and save the setting. The device will automatically save the configuration within 5 seconds.

4.3 One-Click Pairing

The CPE Bridges support one-click pairing to simplify the setup process:

  • Point-to-Point (PTP) Connection: After configuring one unit as Master and the other as Slave, press the RST (Reset) button for approximately 1 second on both the Master and Slave CPE units. They will automatically attempt to establish a bridge connection.
  • Point-to-Multipoint (PTMP) Connection: After configuring one unit as Master and multiple units as Slaves, press the RST (Reset) button for approximately 1 second on the Master CPE and each Slave CPE. The Master will then attempt to establish connections with all available Slave CPEs.

4.4 Power Supply

The CPE Bridge is powered via 24V Power over Ethernet (PoE). Connect the Ethernet cable from the PoE power supply to the WAN/POE port on the CPE unit. The LAN port can then be used to connect to other network devices.

5. Operating Modes

The KuWFi CPE Bridge supports various operating modes to suit different network extension needs:

  • Wireless AP Mode: Typically used by the Master CPE to broadcast a wireless signal or act as the central hub for other CPEs.
  • Wireless Repeater Mode: Used by Slave CPEs to extend the wireless signal from a Master CPE, effectively acting as a bridge.
  • Point-to-Point (PTP) Bridge: Establishes a direct wireless link between two CPE units (one Master, one Slave) to extend a network over a long distance.
  • Point-to-Multipoint (PTMP) Bridge: Establishes wireless links between one Master CPE and multiple Slave CPEs, allowing a central network to be extended to several remote locations.
Diagram illustrating a Point-to-Point wireless bridge connection between two CPE units, extending a network from a router to a camera system.

Image: Point-to-Point Application Diagram

Diagram illustrating Point-to-Multipoint wireless bridge connections, extending a network from a Master CPE to multiple Slave CPEs for various devices like IP cameras.

Image: Point-to-Multipoint Application Diagram

6. WEB UI Configuration

For advanced settings and management, you can access the device's web-based user interface (WEB UI).

6.1 Accessing the WEB UI

  1. Connect Your PC: Connect your computer directly to the LAN port of the CPE Bridge using an Ethernet cable.
  2. Configure PC IP Address: You need to set a static IP address for your computer's network adapter to be in the same subnet as the CPE.
    • Go to your PC's Network and Internet Settings.
    • Select Ethernet and click 'Change Adapter Option'.
    • Right-click on your active network connection and select 'Properties'.
    • Double-click 'Internet Protocol Version 4 (TCP/IPv4)'.
    • Select 'Use the following IP address:' and enter:
      • IP address: 192.168.188.10 (or any IP from 192.168.188.2 to 192.168.188.252, but not 192.168.188.253 or 192.168.188.100)
      • Subnet mask: 255.255.255.0
    • Click 'OK' to save the settings.
  3. Open Web Browser: Open a web browser (e.g., Chrome, Firefox) and enter the default IP address of the CPE: 192.168.188.253
  4. Login: Enter the default username and password.
    • Username: admin
    • Password: admin
Screenshot of the KuWFi CPE Bridge Web UI login page, showing fields for username and password.

Image: WEB UI Login Interface

6.2 Modifying SSID and Password

Once logged into the WEB UI, you can modify the wireless network settings:

  1. Navigate to the 'Wireless' or 'Wi-Fi' settings section.
  2. Locate the SSID (network name) and Password fields. The default SSID is typically 'Wireless2.4G_XXXXXX' and the default password is '66666666'.
  3. Enter your desired new SSID and password.
  4. Click 'Apply' or 'Save' to implement the changes.
Screenshot of the KuWFi CPE Bridge Web UI showing wireless settings, including SSID, channel, encryption, and password fields.

Image: WEB UI Wireless Settings

Important: After configuring the CPE, remember to restore your PC's network adapter settings to 'Obtain an IP address automatically' to regain internet access.

7. Maintenance

7.1 Factory Reset

If you encounter issues or forget your login credentials, you can perform a factory reset:

  • With the device powered on, press and hold the RST (Reset) button for approximately 15 seconds until the LED indicators change. This will revert all settings to their factory defaults.

7.2 Environmental Protection

The CPE Bridge is designed for outdoor use with an IP65 rating, making it waterproof and dustproof. It also features 4KV lightning protection. To ensure longevity and optimal performance:

  • Ensure proper mounting to prevent water accumulation or direct exposure to extreme elements beyond its rating.
  • Operate within the specified temperature range of -30°C to 55°C.
  • Avoid placing the device in locations prone to excessive vibration or physical impact.

8. Troubleshooting

  • Cannot access WEB UI page: Ensure your PC is directly connected to the CPE's LAN port and its IP address is statically set within the 192.168.188.x subnet (e.g., 192.168.188.10 with subnet mask 255.255.255.0), but not the same as the CPE's default IP (192.168.188.253 or 192.168.188.100 for slave). Remember to revert your PC's IP settings after configuration.
  • Poor wireless signal or limited range: The transmission distance can be affected by various environmental factors such as local network conditions, buildings, trees, and other obstructions. Ensure a clear line of sight between CPE units for optimal performance.
  • No power/device not turning on: Verify that the PoE power supply is correctly connected to the WAN/POE port and that the power outlet is functional. Check the PWR LED indicator.
  • No network connectivity: Check the WAN and LAN LED indicators. If they are not lit or blinking as expected, verify Ethernet cable connections and ensure connected devices (router, camera, NVR) are powered on and functioning correctly.
  • CPE units not pairing: Ensure one unit is set as Master ('H') and the other(s) as Slave ('C'). Perform the one-click pairing procedure by pressing the RST button for 1 second on all units.

9. User Tips

  • For optimal long-distance Wi-Fi coverage, especially if you aim for the maximum 1KM range, it is highly recommended to purchase two CPE units to establish a dedicated wireless bridge.
  • The WAN port on the CPE unit is designed to connect to the PoE injector for power and network input, while the LAN port is for connecting to your local network devices.
  • Always ensure a clear line of sight between the Master and Slave CPE units for the best wireless performance and range. Obstacles like buildings and dense foliage can significantly reduce signal strength and transmission distance.

10. Warranty and Support

KuWFi products are designed for reliability and performance. For detailed warranty information, technical support, or to access the full user manual in PDF format, please refer to the official KuWFi website or contact your vendor.

A PDF version of the user manual is available for download: View User Manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.