E-ACE A20

Contents

E-ACE A20 Rear View Camera Instruction Manual

Model: A20 | Brand: E-ACE

1. Introduction

Thank you for choosing the E-ACE A20 Rear View Camera. This manual provides detailed instructions for the proper installation, operation, and maintenance of your camera. This camera is specifically designed to work seamlessly with E-ACE DVR Dashcam A20 models. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

E-ACE A20 Rear View Camera with 5PIN and 2.5MM jack details

Figure 1: E-ACE A20 Rear View Camera Overview

2. Important Compatibility Notice

This rear view camera is guaranteed to work 100% with E-ACE DVR Dashcam A20 models. We cannot guarantee compatibility with other DVR models due to variations in rear image sensors and connection specifications. Using this camera with incompatible DVRs may result in malfunction or damage.

Compatibility notice for E-ACE DVRs

Figure 2: Compatibility Notice

3. Package Contents

Please check the package for the following items:

  • E-ACE A20 Rear View Camera
  • Rear Camera Cable (6 meters or 10 meters, depending on your selection)
I10-6M Rear Camera variantI10P-10M Rear Camera variant

Figure 3: Available Cable Lengths (6m and 10m options)

4. Setup and Installation

Warning: Due to the complexity of vehicle wiring and to prevent damage to the recorder or vehicle, professional installation is highly recommended. The following instructions are for reference only.

4.1 Cable Length Selection

Choose the appropriate cable length (6m or 10m) based on your vehicle's size to ensure sufficient reach from the rear camera position to the DVR unit.

Comparison of 6-meter and 10-meter rear camera cables relative to car length

Figure 4: Cable Length Guide

4.2 Wiring Instructions

  1. Mount the Rear Camera: Securely mount the rear view camera at the desired position on the rear of your vehicle. Common positions include above the license plate or near the trunk handle.
  2. Connect to Reversing Light: Locate your car's reversing lamp power wire. Connect the red cable wire from the rear camera cable to the positive pole (+) of your car's reversing light. This connection enables the automatic reverse parking function.
  3. Connect to DVR: Route the main rear camera cable to the location of your E-ACE DVR Dashcam. Plug the 2.5MM jack (Host Connector) of the rear camera cable into the corresponding input port on your DVR.
  4. Power the DVR: Plug the car charger into the vehicle's cigar lighter socket to provide power to the DVR.
Rear Camera Installation diagram showing wiring to the reversing light and DVR

Figure 5: Rear Camera Wiring Diagram

5. Operating Instructions

5.1 Automatic Reverse Parking

Once properly installed and connected, when you shift your car into reverse gear, the E-ACE DVR Dashcam will automatically switch its display to the rear camera view. This view will typically include parking lines to assist you in maneuvering your vehicle.

Auto Reverse Parking view with guiding lines on a DVR screen

Figure 6: Auto Reverse Parking Display

5.2 Night Vision

The E-ACE A20 Rear View Camera features night vision capabilities to provide clear images even in low-light conditions, enhancing safety during nighttime parking and reversing.

Night Vision Car Rear Camera

Figure 7: Night Vision Feature

6. Maintenance

The E-ACE A20 Rear View Camera is designed with a sealed, waterproof construction to prevent dust, humidity, and aggressive gases from entering, ensuring durability and low maintenance.

Waterproof feature of the camera

Figure 8: Waterproof Design

To maintain optimal image clarity:

  • Regularly clean the camera lens with a soft, damp cloth. Avoid abrasive cleaners.
  • Ensure the camera's mounting is secure and free from obstructions.

7. Troubleshooting

  • No image on DVR when reversing:
    • Check if the red cable is correctly connected to the positive (+) pole of the reversing light.
    • Ensure the 2.5MM jack is securely plugged into the DVR.
    • Verify that the DVR is powered on and functioning correctly.
    • Confirm compatibility: This camera is only guaranteed to work with E-ACE DVR Dashcam A20.
  • Distorted or unclear image:
    • Clean the camera lens.
    • Check for any physical damage to the camera or cable.
    • Ensure the cable connections are firm.
  • Parking lines not appearing:
    • This feature is typically controlled by the DVR. Refer to your E-ACE DVR manual for settings related to parking lines.

8. Specifications

FeatureSpecification
Brand NameE-ACE
Model NumberI10/I10P
Compatible DVR ModelsA20 (E-ACE DVR Dashcam)
Lens MaterialPlastic + Glass
Shell MaterialPlastic
MaterialABS
Guiding LineYes
Viewing Angle140°
Camera View140 Degree
Connect Type2.5MM Jack, 5 PIN
Wire or WirelessWire
Length of Video Cable6M, 10M (selectable)
Waterproof Rear CameraOnly for E-ACE DVR Dashcam
720P Rear View CameraReverse Camera Parking Assistance Cameras
CertificationCE, FCC, RoHS
OriginMainland China
E-ACE Qualification Certifications including CE, FCC, RoHS

Figure 9: E-ACE Product Certifications

9. User Tips

  • Verify Night Vision: After installation, test the camera in low-light conditions to ensure the night vision feature is functioning as expected for enhanced safety.
  • Professional Installation: While DIY installation is possible, consider professional help, especially if you are unfamiliar with car electrical systems, to avoid potential issues.

10. Warranty and Support

E-ACE products typically come with a warranty. For specific warranty details, technical support, or service inquiries, please contact the E-ACE Flagship Store directly through the platform where you purchased the product. Ensure you have your purchase details and product model number (A20) ready when contacting support.

© 2024 E-ACE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.