Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your SMARTOUR AI 360 Car Camera System. This advanced system offers a panoramic surround view, 4K 1080P AHD resolution, and enhanced night vision capabilities, integrating seamlessly with your Android Auto Radio for a safer and more informed driving experience.
Figure 1: SMARTOUR AI 360 Car Camera System components and typical display interface.
Package Contents
Before installation, please verify that all components are present:
- Main Control Unit
- Front Camera
- Rear Camera
- Left Side Camera
- Right Side Camera
- Knob Controller
- GPS Antenna
- Wiring Harnesses (various cables for power, video, and control)
Figure 2: Complete package contents of the SMARTOUR AI 360 Car Camera System.
Setup and Installation
Professional installation is highly recommended for this system due to complex wiring and camera calibration. Ensure the vehicle's power is disconnected before beginning installation.
1. Camera Placement:
- Front Camera: Mount securely at the front of the vehicle, ensuring an unobstructed view.
- Rear Camera: Mount securely at the rear of the vehicle, typically above the license plate, for clear reverse vision.
- Left & Right Side Cameras: Install on the left and right sides of the vehicle, usually under the side mirrors, to cover blind spots.
Figure 3: Recommended camera placement for comprehensive 360-degree monitoring.
2. Main Control Unit Installation:
Install the main control unit in a secure, dry location within the vehicle, away from direct heat or moisture. Connect the camera cables, power supply, and video output to your Android Auto Radio display as per the wiring diagram (not provided in this manual, refer to the full installation guide if available).
3. Knob Controller Installation:
Mount the knob controller in an easily accessible location for the driver, allowing for convenient view switching.
4. Calibration:
After physical installation, the system requires calibration to stitch the camera feeds into a seamless 360-degree panoramic view. Follow the on-screen instructions on your Android Auto Radio display for the calibration process. This typically involves placing calibration mats around the vehicle.
Operating Instructions
The SMARTOUR AI 360 system is designed for intuitive operation, primarily through the knob controller and automatic triggers.
1. Power On/Off:
The system powers on automatically with the vehicle's ignition and powers off when the vehicle is turned off.
2. View Selection with Knob Control:
Use the knob controller to manually switch between different camera views on your display.
Figure 4: Knob control and various display modes available, including 3D view and ultra wide-angle streaming.
- Press OK: Displays the front view.
- Turn Knob: Cycles through available views (e.g., 3D view, ultra wide-angle streaming, front view, front view enlarged, vertical view, rear view, rear view enlarged, width limiting mode).
Figure 5: Pressing the 'OK' button on the knob controller activates the front view.
3. Automatic View Switching:
- Rear View: Automatically displays when the vehicle is put into reverse gear.
- Left View: Automatically displays when the left turn signal is activated.
- Right View: Automatically displays when the right turn signal is activated.
Figure 6: The system automatically switches to rear view when reversing.
Figure 7: Activating the left turn signal automatically shows the left side view.
Figure 8: Activating the right turn signal automatically shows the right side view.
4. AI Intelligent Technology:
The system utilizes AI to detect people and vehicles, providing distance display reminders to enhance driving safety.
Figure 9: AI technology assists in detecting objects and providing distance alerts.
5. Night Vision:
The system features enhanced night vision capabilities, providing clear viewing in low-light conditions.
Video 1: Demonstration of the system's night vision effect and AI detection features.
6. Loop Recording:
The system supports loop recording, continuously recording footage. Important events can be locked to prevent overwriting.
Figure 10: Loop recording ensures continuous coverage, with options to lock or delete footage.
Maintenance
- Cleaning Cameras: Regularly clean the camera lenses with a soft, damp cloth to ensure clear vision. Avoid abrasive cleaners.
- Cable Inspection: Periodically check all wiring connections for any signs of wear or damage.
- Software Updates: Check with the manufacturer or seller for any available software updates to ensure optimal performance and access to new features.
- Storage Management: If using a memory card for recording, periodically check its status and ensure sufficient free space. Format the card as needed (this will erase all data).
Troubleshooting
- No Display/Black Screen:
- Ensure all power connections to the main control unit and the Android Auto Radio are secure.
- Verify the video output cable is correctly connected to the display.
- Check if the Android Auto Radio is set to the correct input source for the camera system.
- Distorted or Unclear Image:
- Clean camera lenses thoroughly.
- Check for any physical obstructions blocking the camera's view.
- Recalibrate the 360-degree system if the panoramic view appears misaligned.
- Ensure all camera cables are securely connected and not damaged.
- Automatic Switching Not Working:
- Verify that the system's trigger wires (e.g., reverse signal, turn signal) are correctly connected to the vehicle's electrical system.
- Check system settings on your Android Auto Radio to ensure automatic switching is enabled.
- Knob Controller Unresponsive:
- Check the connection of the knob controller to the main unit.
- Ensure no debris is obstructing the knob's movement or buttons.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | SMARTOUR |
| Imaging Sensor | 1/3 Color CMOS |
| Memory Card Required Reading Speed | Class 4 |
| Max External Memory | 32G |
| Display Size | NONE (Integrates with Android Auto Radio) |
| Number Of Lenses | 4 |
| Camera Parameter | REAR (Implies rear camera is primary reference, but system includes all 4) |
| Touch Screen | No (Relies on Android Auto Radio's touch or knob control) |
| Monitor Area | Side, FRONT, REAR |
| Interface | AV-Out |
| Certification | CE |
| Hign-concerned Chemical | None |
Note: This system is designed to integrate with an existing Android Auto Radio display and does not include its own monitor.
User Tips
- Pre-Purchase Manual Review: It is advisable to review the full installation manual (if available from the seller) before purchasing to understand the complexity and compatibility requirements for your specific vehicle.
- Display Compatibility: Confirm that your Android Auto Radio is compatible with AV-Out input for video display. The system does not come with its own monitor.
- Professional Installation: Given the multiple camera placements and wiring, professional installation is strongly recommended to ensure correct functionality and calibration.
- Regular Calibration Check: If you notice any distortion or misalignment in the 360-degree view, perform a system recalibration.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the SMARTOUR Official Store directly. Keep your purchase receipt as proof of purchase.