1. Introduction
Thank you for purchasing the BQCC Car Audio Radio, Model 8013. This 1DIN in-dash unit is designed to provide a versatile audio experience in your vehicle, featuring FM radio, Bluetooth connectivity for hands-free calls and music streaming, USB and TF card playback, and AUX input. It also supports mobile phone charging. Please read this manual carefully before installation and operation to ensure proper use and optimal performance.
2. Safety Information
- Ensure the unit is installed by a qualified technician to prevent damage to the vehicle's electrical system.
- Do not operate the unit in a way that distracts you from driving. Always prioritize road safety.
- Avoid exposing the unit to extreme temperatures, direct sunlight, or moisture.
- Use only the specified voltage (12V DC) for power.
- Do not attempt to disassemble or modify the unit. This may void the warranty and cause damage.
- Keep the volume at a moderate level to avoid hearing damage and to remain aware of traffic sounds.
3. Package Contents
Please check that all the following items are included in your package:
- BQCC Car Audio Radio Host (Model 8013)
- Power Cord
- Remote Control (18 keys)
- User Manual (this document)
- Disassembly Keys (2 pieces)
4. Product Overview
4.1 Front Panel
- Power/Mode Button: Short press to switch between Radio, USB, TF, AUX, and Bluetooth modes. Long press to power on/off.
- Volume Knob: Rotate to adjust volume. Press to access menu options (Bass, Treble, Balance, Fader, EQ).
- Mute Button: Mutes/unmutes audio.
- USB Port: For USB flash drive playback and mobile phone charging.
- TF Card Slot: For TF (MicroSD) card playback.
- AUX Input: 3.5mm jack for external audio devices.
- Band Button: In FM mode, cycles through FM bands (FM1, FM2, FM3).
- CLK Button: Displays time. Long press to set time.
- Preset Buttons (1-6): Save and recall radio stations. In playback mode, 1/▲SDM (Play/Pause), 2/INT (Intro Play), 3/RPT (Repeat), 4/RDM (Random Play), 5/-10 (Previous 10 tracks), 6/+10 (Next 10 tracks).
- Previous/Next Track Buttons: Short press for previous/next track; long press for fast rewind/forward. In radio mode, short press to tune, long press for auto-scan.
- Reset Button: Small button to reset the unit to factory settings.
4.2 Rear Connection Ports
- Power Card Interface: Main power and speaker wiring harness connection.
- Audio Output (RCA): 2 channels (Left and Right) for connecting to an external amplifier or subwoofer.
- Antenna Jack: For connecting the car's FM radio antenna.
5. Installation
This unit is designed for standard 1DIN car audio slots. Professional installation is recommended.
5.1 Pre-Installation Check
- Ensure your vehicle's electrical system is 12V DC.
- Disconnect the vehicle's battery negative terminal before starting installation to prevent short circuits.
- Verify the dimensions of your car's dashboard opening match the unit's installation size (178x50mm).
5.2 Wiring Diagram
Refer to the wiring diagram provided with your power cord. Typical connections include:
- Yellow Wire: Constant 12V (Battery +)
- Red Wire: ACC (Ignition Switch 12V +)
- Black Wire: Ground (-)
- Blue Wire: Power Antenna / Remote Turn-on for Amplifier
- Speaker Wires: Connect to vehicle's speakers (ensure correct polarity).
Caution: Incorrect wiring can cause severe damage to the unit and your vehicle's electrical system. If unsure, consult a professional.
5.3 Mounting the Unit
- Install the metal mounting sleeve into the dashboard opening.
- Bend the tabs on the mounting sleeve outwards to secure it.
- Connect the wiring harness, antenna, and RCA cables to the rear of the unit.
- Carefully slide the unit into the mounting sleeve until it clicks into place.
- Reconnect the vehicle's battery negative terminal.
6. Operation
6.1 Power On/Off and Mode Selection
- Power On: Press the power/mode button.
- Power Off: Long press the power/mode button.
- Mode Select: Short press the power/mode button to cycle through FM, USB, TF, AUX, and BT (Bluetooth) modes.
6.2 FM Radio Operation
- In FM mode, press the BAND button to select FM1, FM2, or FM3.
- Short press the Previous/Next Track buttons to manually tune to the next/previous frequency.
- Long press the Previous/Next Track buttons to automatically scan for the next/previous strong station.
- To save a station, tune to the desired frequency, then long press one of the Preset Buttons (1-6) until you hear a beep. The station is now saved to that preset.
6.3 USB/TF Card Playback
- Insert a USB flash drive into the USB port or a TF card into the TF card slot. The unit will automatically switch to USB/TF mode and begin playback.
- Use the Previous/Next Track buttons to skip tracks.
- Use Preset Button 1 (1/▲SDM) for Play/Pause.
- Preset Button 2 (2/INT): Plays the first few seconds of each track.
- Preset Button 3 (3/RPT): Repeats the current track.
- Preset Button 4 (4/RDM): Plays tracks in random order.
- Preset Button 5 (5/-10): Skips back 10 tracks.
- Preset Button 6 (6/+10): Skips forward 10 tracks.
6.4 AUX Input
- Connect your external audio device (e.g., smartphone, MP3 player) to the AUX input using a 3.5mm audio cable.
- Press the Mode button until 'AUX' is displayed.
- Control playback from your external device.
6.5 Bluetooth Operation
- Pairing: Turn on Bluetooth on your mobile device and search for 'SWL-BT'. Select it to pair. Once connected, the Bluetooth icon on the radio display will illuminate.
- Music Streaming: Play music from your paired device. Use the radio's controls (Play/Pause, Previous/Next Track) or your phone to manage playback.
- Hands-free Calling: When a call comes in, the radio will display the caller ID. Press the Volume Knob (or the answer button on the remote) to answer. Press again to end the call.
6.6 Time Display and Setting
- Press the CLK button to display the current time.
- To set the time, long press the CLK button until the hour digits flash. Use the Volume Knob to adjust the hour, then press the CLK button again to switch to minute adjustment. Adjust minutes with the Volume Knob. Press CLK once more to confirm.
6.7 EQ Sound Effects
- Press the Volume Knob repeatedly to cycle through audio settings like BASS, TREBLE, BALANCE, FADER, and EQ.
- When EQ is displayed, rotate the Volume Knob to select preset equalizer modes such as Pop, Rock, Classic, etc.
6.8 Power Off Memory
The unit features a power-off memory function. It will remember the last played frequency, track position, and volume level when powered off and restore them upon restart. Note: This function is active when using TF or U disk playback and the machine is shut down normally. It is not available for mobile phone playing.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the unit's surface. Do not use abrasive cleaners or solvents.
- Fuse Replacement: If the unit does not power on, check the fuse in the power cord. Replace it with a fuse of the same rating if blown.
- Reset: If the unit malfunctions or becomes unresponsive, press the Reset button with a pointed object (e.g., a pen tip) to restore factory settings.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Blown fuse; incorrect wiring; loose power connection. | Check and replace fuse; verify wiring connections; ensure power cord is securely connected. |
| No sound | Volume too low; mute activated; incorrect speaker wiring; incorrect mode selected. | Increase volume; deactivate mute; check speaker connections and polarity; ensure correct audio source mode. |
| Poor FM reception | Antenna not connected; weak signal area; damaged antenna. | Ensure antenna is securely connected; try tuning to stronger stations; check antenna for damage. |
| Bluetooth not connecting | Bluetooth not enabled on phone; unit not in BT mode; device already paired to another unit. | Enable Bluetooth on your phone; switch unit to BT mode; unpair from other devices; try resetting the unit. |
| USB/TF card not playing | Unsupported audio format; corrupted files; card/drive not inserted correctly; card/drive capacity too large. | Ensure files are MP3/WMA/WAV/FLAC/APE; reformat card/drive; reinsert card/drive; try a different card/drive. |
| Remote control not working | Dead battery; obstruction; remote not pointed at IR sensor. | Replace remote battery; remove obstructions; ensure direct line of sight to the unit's IR sensor. |
9. Specifications
| Feature | Specification |
|---|---|
| Model | 8013 |
| Type | Car MP3 Player (1DIN In-Dash) |
| Software Solution | 5301 |
| Radio Frequency | FM 87.5~108MHz |
| Radio IC | Chip integration |
| Power Amplifier IC | TDA1028 |
| Output Power | 45W x 4 |
| Working Voltage | 12~14.4V |
| Working Temperature | -10~60℃ |
| Bluetooth Version | 5.0 (Default Name: SWL-BT) |
| Panel Light | Blue |
| CPU | 5323B |
| Screen Type | LED Digital Tube (Red) |
| Installation Size | 178x50mm |
| Face Case Size | 188x58mm |
| Host Depth | 45mm |
| Single Unit Weight | 0.33KG |
| Front USB | USB2.0 (for reading and charging) |
| TF Card Support | Supported |
| Reset Button | Supported |
| Audio Output | 2 channels (RCA, Left + Right) |
| Audio Input | Front AUX input (Left + Right) |
| Audio Formats | MP3/WMA/WAV/FLAC/APE |
| OSD Language | English |
| Certification | CE |
10. User Tips
- For optimal Bluetooth performance, ensure your phone is within close proximity to the unit.
- When using USB or TF card, ensure your audio files are in supported formats (MP3, WMA, WAV, FLAC, APE) for seamless playback.
- The USB port can be used for convenient charging of your mobile devices while on the go.
- Experiment with the EQ sound effects to find the audio profile that best suits your music genre and personal preference.
- If you experience any issues, a quick reset using the dedicated reset button can often resolve minor glitches.
11. Warranty and Support
BQCC products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance, or inquiries regarding your product, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase for any warranty claims.
