Introduction
This manual provides detailed instructions for the operation and maintenance of your Midea Air Conditioner Remote Control, model RG10A(B2S)/BGEF. Please read this manual thoroughly before using the remote control to ensure proper function and to extend the life of your device.
Safety Information
- Do not expose the remote control to direct sunlight, high temperatures, or high humidity.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Keep the remote control away from water and other liquids.
- Do not attempt to disassemble or modify the remote control.
- Dispose of used batteries according to local regulations.
Product Overview
The RG10A(B2S)/BGEF remote control is designed for Midea air conditioning units, offering convenient control over various functions including temperature, mode, fan speed, and more. It features a backlit display for easy visibility and supports both Fahrenheit and Celsius temperature readings.
Figure 1: Front view of the remote control (Celsius display)
Figure 2: Front view of the remote control (Fahrenheit display)
Button Functions:
- Power Button (Yellow): Turns the air conditioner ON or OFF.
- Mode Button: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- Eco Gear Button: Activates or deactivates the energy-saving Eco Gear function.
- SET Button: Used for setting various parameters.
- OK Button: Confirms selections.
- Up/Down Arrows (▲/▼): Adjusts temperature, time, or navigates menu options.
- Fan Button: Adjusts fan speed.
- Swing Button: Controls the louver swing function.
- Boost Button: Activates rapid cooling or heating.
- LED Button: Turns the display backlight ON or OFF.
- Clean Button: Initiates the self-clean function (if available on AC unit).
- Lock Button (Padlock icon): Locks or unlocks the remote control buttons.
Setup
Battery Installation:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two (2) AAA 1.5V alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 3: Battery compartment open
Note: Batteries are not included with the remote control.
Operating Instructions
Basic Operation:
- Turning On/Off: Press the yellow Power button once to turn the AC unit on, and again to turn it off.
- Changing Mode: Press the 'Mode' button repeatedly to cycle through available operating modes (e.g., Cool, Heat, Fan, Dry, Auto). The current mode will be displayed on the remote's screen.
- Adjusting Temperature: Use the Up (▲) and Down (▼) arrow buttons to set your desired temperature.
- Adjusting Fan Speed: Press the 'Fan' button to cycle through different fan speeds (e.g., Low, Medium, High, Auto).
- Activating Swing: Press the 'Swing' button to start or stop the automatic louver swing.
Switching Temperature Units (Fahrenheit/Celsius):
This remote control supports both Fahrenheit (°F) and Celsius (°C) temperature displays. To switch between these units:
- Simultaneously press and hold the Up (▲) and Down (▼) arrow buttons for approximately 3 seconds.
- The temperature display on the remote control will switch to the alternate unit. Repeat the process to switch back.
Maintenance
Cleaning the Remote Control:
- Wipe the surface of the remote control with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the remote's finish or internal components.
Battery Replacement:
- Replace batteries when the remote control's display becomes dim or unresponsive.
- Always replace both batteries at the same time with new AAA 1.5V alkaline batteries.
- If the remote control will not be used for an extended period (e.g., several weeks or months), remove the batteries to prevent leakage and potential damage to the device.
Figure 4: Back of remote with battery compartment and warning label
Troubleshooting
- Remote not responding: Check if the batteries are inserted correctly and are not depleted. Replace with new batteries if necessary. Ensure there is a clear line of sight between the remote and the AC unit's receiver.
- Display is dim or blank: This usually indicates low battery power. Replace the batteries.
- AC unit not responding to specific commands: Ensure the remote is pointed directly at the AC unit. Some functions may require the AC unit to be in a specific mode (e.g., heating function requires the AC to be in heat mode).
Specifications
| Feature | Specification |
|---|---|
| Brand | Midea (Compatible with) |
| Model Number | RG10A(B2S)/BGEF |
| Compatible Models | RG10A/BGEF |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Use | Air Conditioner |
| Material | ABS Material |
| Color | White |
| Wireless Range | Less Than 5 m |
| Temperature Display | Fahrenheit and Celsius |
| Batteries | 2 x AAA (not included) |
| Features | With Heating Function, Backlit Screen |
| Support APP | No |
| Certification | CE |
User Tips
- To maximize battery life, avoid leaving the remote control in direct sunlight or extremely hot environments.
- If you find the backlight too bright or distracting, use the 'LED' button to turn it off.
- For optimal performance, ensure the remote control is always pointed directly at the air conditioner's receiver.
Warranty and Support
This remote control is typically covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions.
For technical support or assistance with your Midea air conditioner or remote control, please contact Midea customer service or your authorized service provider. Keep your purchase receipt as proof of purchase for any warranty claims.
