Introduction
This manual provides detailed instructions for the safe and efficient operation of your Baofeng UV-29 Pro Max Tri-Band Walkie Talkie. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage. Keep this manual for future reference.
Product Overview
The Baofeng UV-29 Pro Max is a versatile tri-band handheld amateur radio designed for reliable communication across multiple frequency ranges. It features a clear 1.77-inch LCD, Type-C charging, and a robust set of functions including DTMF, VOX, NOAA weather reception, and 999 memory channels.
Key Features:
- Tri-Band Operation: FM (65-108MHz RX), VHF (136-174MHz RX/TX), VHF (220-260MHz RX/TX), UHF (400-520MHz RX/TX)
- 1.77-inch Large LCD Screen with Full Keyboard
- Up to 999 Memory Channels
- DTMF Encoder and Manual Dial
- VOX (Voice Activated Transmit)
- NOAA Weather Reception
- Multimode Scanning and One-Touch Search Frequency
- Dual Watch / Dual Reception
- Type-C and Desktop Charging Options
- High Capacity Li-ion Battery
- Programmable Repeater Offset
- 10 Levels of Squelch Adjustment
- PC Programmable
Package Contents:
- 1 x Baofeng UV-29 Pro Max Radio
- 1 x Battery
- 1 x Antenna
- 1 x Charger (EU/US standard, depending on choice)
- 1 x Belt Clip
- 1 x Strap
- 1 x User Manual



Setup
1. Battery Installation:
- Align the battery with the compartment on the back of the radio.
- Gently push the battery into place until it clicks securely.
2. Antenna Attachment:
- Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.
3. Charging the Battery:
The UV-29 Pro Max supports two charging methods:
- Desktop Charger: Place the radio (with battery installed) into the desktop charging cradle. Ensure the charging indicator light illuminates.
- Type-C USB Charging: Connect a Type-C USB cable to the port on the side of the radio and to a compatible USB power source.
Charge the battery fully before initial use. The charging indicator will typically change color or turn off when charging is complete.
4. Belt Clip Attachment:
- Align the belt clip with the screw holes on the back of the radio.
- Secure it with the provided screws.
Operating Instructions
1. Power On/Off:
Rotate the power/volume knob clockwise to turn the radio on. Continue rotating to adjust the volume. Rotate counter-clockwise until a click is heard to turn the radio off.
2. Frequency and Channel Selection:
The radio operates on the following frequency bands:
- FM: 65-108MHz (Receive only)
- VHF1: 136-174MHz (Receive & Transmit)
- VHF2: 220-260MHz (Receive & Transmit)
- UHF: 400-520MHz (Receive & Transmit)
Use the keypad to directly input frequencies or navigate through the 999 memory channels. The 1.77-inch LCD will display the current frequency or channel information.

3. Transmitting and Receiving:
- To Transmit: Press and hold the PTT (Push-To-Talk) button on the side of the radio and speak into the microphone. Release the PTT button to listen.
- VOX Function: Enable VOX in the menu to transmit automatically when your voice is detected, without needing to press PTT.
- Dual Watch/Reception: The radio can monitor two different frequencies simultaneously.
4. Advanced Functions:
- DTMF: Use the DTMF encoder for analog signaling, including single call, group call, and all call functions.
- Scanning: The radio supports VFO scan range setting, channel scan, CTC/DCS scan, and allows adding/removing channels from scan lists.
- CTCSS/DCS Tones: Utilize 50 CTCSS tones and 105 DCS codes for selective calling and interference reduction.
- NOAA Weather: Access NOAA weather channels for real-time weather alerts.
- Squelch: Adjust squelch sensitivity (10 levels) to filter out weak signals and background noise.
- Power Selection: Switch between high and low power output modes to conserve battery or extend range.
- Keypad Lock: Lock the keypad to prevent accidental input.
- PC Programmable: Connect the radio to a computer for advanced programming of channels and settings.

Maintenance
- Cleaning: Wipe the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Battery Care: Avoid overcharging or completely draining the battery. Store the battery in a cool, dry place when not in use for extended periods.
- Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna, as this can damage the transmitter.
- Water Resistance: The radio has an IP45 rating, meaning it is protected against water jets from any direction. However, it is not designed for submersion. Avoid exposing it to heavy rain or dropping it in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on | Battery is low or not installed correctly. | Charge the battery or re-install it securely. |
| Cannot transmit or receive | Incorrect frequency/channel, squelch too high, antenna loose, or battery low. | Verify frequency/channel, adjust squelch, check antenna connection, charge battery. |
| Poor audio quality | Weak signal, incorrect CTCSS/DCS settings, or antenna issue. | Move to an area with better signal, check CTCSS/DCS, ensure antenna is secure. |
| Keypad is unresponsive | Keypad lock is active. | Deactivate keypad lock (refer to operating instructions for specific key combination). |
Specifications
| Feature | Specification |
|---|---|
| Model Number | UV-29 Pro Max |
| Brand Name | BAOFENG |
| Frequency Range | FM: 65-108MHz (RX) VHF1: 136-174MHz (RX&TX) VHF2: 220-260MHz (RX&TX) UHF: 400-520MHz (RX&TX) |
| Channel Capacity | 999 |
| Channel Spacing | 25.0KHz / 12.5KHz |
| Output Power (Max) | 15W (RF Power Output <5W) |
| Battery Capacity | High Capacity (approx. 15 hours battery life) |
| Input Voltage | DC 7.4V ±10% |
| Antenna Impedance | 50 Ohm |
| Waterproof / Water-Resistant | IP45 |
| Display | 1.77" LCD |
| Dimensions | 26CM*20CM*6CM |
| Weight (with battery/antenna) | 298g |
| Operating Temperature | -10°C to +60°C |
| Receiver Sensitivity | -120dBm |
| Receiver Audio Power Output | 1000mW |
| Transmitter Modulation | 16K0F3E@25KHZ / 11K0F3E@12.5KHZ |
| Accessory Connection | 2 pin Kenwood jack |
Note: All specifications are subject to change without notice.
User Tips
- Power Output: While the radio is advertised with a maximum power of 15W, the RF Power Output for transmission is typically less than 5W to comply with regulations for handheld devices. Always check local regulations regarding radio power limits.
- Programming: For advanced users, PC programming allows for greater customization of channels, tones, and other settings. Consider using compatible software for this purpose.
- Battery Life: To maximize battery life, utilize the low power output setting when communicating over short distances and enable the battery saving function.
Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.